** Official Mayhems Development Log **

Mayhems has been working hard on new Coolant technologies and direct correlation between high heat systems and ability of certain inhibitors, relating to low grade copper produced products and aluminium produced products.

With our new in house analytical systems we have discovered new formulation’s that can improve not only the heat transfer of the fluids but also prolong the life of low grade copper and “all aluminium” based fittings, blocks and components. It will also prolong the effective life of the new coolant based products.

The new high grade in house developed inhibitors create a more heat resilient barrier on the copper and aluminium to help protect them from degradation over a period of time and is geared towards small high heat creating systems such AIO’s, micro ATX / ITX systems (using small amounts of coolant) and also duel / triple based GPU high heat load systems utilising more fluids and low grade copper parts.

With the popularity of Small micro system utilising less fluids and also extreme high heat system out putting higher TDP / Wattage (support request driven direct from us) Mayhems is the only manufacture who create products based on what the customer needs and expects from us not what is the most profitable.

More information will be forth coming as we progress.
 
I shall leave this here and run ->

12140783_10153431416753144_4148692527096311613_n.jpg


Nah this is the new Aurora ive been working on for a long time. Like i've said before we don't rest we keep on plodding away.
 
Mayhems Flex UV White None Leaching tubing. Based on the same formula of our clear tubing and doesn't leave a powdery residue (known and found in other manufacturers tubing).

14wrc7q.jpg

x2oqxw.jpg

6riyzd.jpg

1zgdbuw.jpg
 
New improved Dyes now rolling out across the whole colour range. I have been working hard on our new formulas for quite some time and now we have all the final ingredients on hand and the new formula is all done and dusted. We will roll them into the new coolants and products for yet another improvement.

When you use the new dyes you find they disperse in a system much faster and easier and even some are much stronger than before.

They also fix some past issues users have picked up on :).
 
Yes if you watch the labels you'll see pastel has gone up to version 4 (v4) top right hand corner on labels. This denotes the change. OCUK have a high turnover rate on products so chances are high they will have stock of any of the latest versions. What you need to remember though some colors sell faster than other so some will take a while to change. Also its down to stock rotation of suppliers.
 
Mayhems UV Opaque Tubing

Mayhems UV Opaque Tubing is extremely versatile with new ’Polymer Additives’ that do not leach plasticizers into the system. The chemical makeup of Mayhems new coloured tubing has never been used before and is a brand new concept by Mayhems Solutions LTD and is fully REACH complaint. Mayhems Opaque Tubing has been tested in systems reaching temperatures of up to 90c and liquid heat internal temperatures of 65c+. The UV White tubing has extreme flexibility and can easily take heat loads way beyond other brands and keep its elasticity. Mayhems Opaque tubing has an excellent bend radius suited to liquid cooling systems.

4vmons.jpg


Mayhems Coloured tubing will also partially acts as a catcher by absorbing soluble residue stopping it reaching and fouling the system. This is a very unique feature and will aid in prolonging the liquid of the coolant within the system and also the life of the PC liquid cooling parts.

jinard.jpg


This is Tubing is developed, produced and made in the Britain entirely utilising British manufacturing techniques and knowledge.

wrhlck.jpg


Release colours are UV Reactive White followed by UV Reactive Red and UV Reactive Blue in sizes 13mm ID / 19mm OD, 10mm ID / 13mm OD, 10mm ID / 16mm OD.

3582xsm.jpg
 
Last edited:
I have been very very bizzy with work. Sales have gone up which takes me away from posting how ever ..

15hlqf.jpg


We have been working hard, this will be released in March.
 
Hi Mark

its very good we have been working on it for 1.5 year now, we sent samples out to various countries over 1+ year ago and accumulating data ect ect ready for its sale. Its being used in "Other" types of system's but cannot speak about it just yet due to NDA's but yup im happy.
 
New Release.

Mayhems XT-1 Nuke Colours in 100ml Concentrate form.

15845fn.jpg


RRP £3.50+ VAT

Mayhems XT-1 Nuke

The new “Non Toxic” high end Ethylene Glycol coolant containing a patented DeTox™.

100ml of Mayhems XT-1 Nuke will make 1000ml of coolant (1/10 mix ratio).

• 7 Year Shelf Life
• 5 Year System Life
• Non Toxic Ethylene Glycol (Patented Mix)
• Pet and Human Safe
• Stable long lasting Dyes made in house
• UV Active
• Aluminium Leach Free Bottles
• Duel Seal Bottles
• Biocide + (new formula for extreme cooling)
• Corrosion + Protection
• Protects all metals used in current cooling systems

Mayhems XT-1 Nuke is a new formulation of Non Toxic Ethylene Glycol that can be used in pressurised environments up to 390°C and down to –50 °C / -58 °F. The formulation will last over twice as long as our existing XT1 and has much more resilient biocides and inhibitors. This makes it more suitable to small form factor PC’s, all in one cooling solutions and high heat load systems utilising multiple graphic card array setups.

Mayhems XT-1 Nuke is perfect for use in Co2 lasers, chillers and solar environmental systems due to its improved heat transfer characteristics including lower dynamic viscosity and higher thermal conductivity.

Mayhems XT-1 Nuke contains a new form of synergistic corrosion inhibitors to protect metals commonly found in systems e.g. aluminium, copper, brass, steel, plated water cooling blocks. Mayhems XT-1 Nuke has been independently tested and found to meet BS6580 and ASTM D1384 corrosion standards.

Mixing ratios

Frost Protection °C / °F - *% in the system

- 05°C / 23°F - 10%*
- 10°C / 14°F - 22%
- 15°C / 05°F - 28%
- 20°C / -4°F - 33%
- 25°C / -13°F - 38%
- 30°C / -22°F - 42%
- 35°C / -31°F - 46%
- 40°C / -40°F - 54%
- 45°C / -49°F - 57%
- 50°C / -58°F - 60%

* This is the bare minimum mix ratio for Mayhems XT-1 Nuke to work effectively.

Mayhems Coolants Tubing Compatibility Chart.
2wpnu2w.png
 
@Dempsey22 We've been testing tubing over the years and since we don't sell PETG, we didn't start testing it till Last year.

Testing takes time and we had to wait and see what happen'd. Over the long term we saw that PETG shrunk and micro fractured this was a cause for concern and hence the warnings are now in place to let the users know what we recommend. Biocide also had similar issues.

If you check out the new products we are releasing and working on all information is in place so you the user can make an informed decision on what tubing you would like to use with what product. As said Mayhems does not sell nor do we make PETG tubing, its the responsibility of the manufacturing companies to issue there own warnings and guide lines like we have done.
 
Oky looked into this for you on the site end, You'll not like the answer because i do not either. Fed EX has bought out TNT and what they are trying do is ramp up prices for the EU (well they have ramped up the prices). They are wanting customers to move over to to Fed Ex and by doing this it is hurting our EU export prices. Were going to look into using another courier how ever many do not allow liquids to be sent making it very difficult for us to conform with there T&C's. It will take a few weeks to sort how ever thank you for letting pointing this issue out and it is some thing i we will work on.
 
1) any plastic bottle will do.
2) yes it is fine using it in that system. 10% mix ratio for it to last a long long time :) so 100mls of coolant to 900mls of water
3) good pump, Aqua computer make of the best products on the market.
4) it will not effect your o-rings is has a inbuilt anti-shrinkage lubricant to stop this from happening.

Sorry for late replay been very bissy
 
It will effect the coolant but yes it can as long as its no more than 100ml.

Updated tubing testing - proof is in the eating not all PETG is equal

tubingupdated.jpg
 
Just part 2 should do the job, if you after getting into all the crevasse then you'll need to strip. Use warm water and it will aid in cleaning. When i say warm you looking at no more than 30c.
 
You must log in or register to reply here.
Back
Top Bottom