*** Official SuperPI Leaderboard ***

[illuz]

im sorry but couldn't resist,no more though now im done

hahaha, you do have a cracking chip sir! How come at the same speed & ram timings though, you surpass by multiple seconds?! Are Gigabyte boards THAT good? I'll pick the competition up when I get under water, secured a 240mm Monsta rad and have the EK-water block already

There's something wrong with the leaderboard.... Why is Wazza not on top ?

....o No wait !

@illuz You're losing a lost battle. His chip was hand crafted by 23 naked virgins in silicon heaven

Tell me about it! hahaha. I'll add the scores now guys.


Vonex, slacken your timings on your RAM. Try 9-11-11-21-1T and set tRFC to 96. Slackening the timings to 9-11-11-21 gave me better performance than 9-10-10-21.

 

[illuz]

My PLL is always at 1.6... I'll remember that for when I next have a go at this.

I want to keep benching faster times but I'm just not comfortable doing this on air anymore, 1.7 is a heapload of volts. Kinda lucky I didn't fry my chip lol

 

[illuz]

Running all my fans 100% when I booted instantly, so that's 9 going full whack and I was hitting about 75-80 during that run. I'm delidded with Liquid Ultra

 

[illuz]

1.728v fair play, but......

I don't blame you hehe. I won't be running that again anytime soon, trust me.

gigabyte boards are good clockers

I still have my ace card but hope I wont need to use it

@illuz I think my faster memory speed clinched it

What is this ace card you have? magical 5.6GHz or something?
Looks that way. I shall be back in the near future

 

[illuz]

If rumours are true, Haswell is meant to overclock like a beast!

 

[illuz]

Not worth upgrading to the 4770k, you'll need a new mobo too. Wait for skylake-E

 

[illuz]

Why waste that money for a little extra performance on an igpu, benefits that you won't see, when you could use that money for another 680? Benefits that you will see

 

[illuz]

Get a ref model that clocks well

 

[illuz]

did you fix your gflop issue? could need ibt re downloading?

The issue only started when he swapped his ram for Sammy ram, after speaking last night he's on the earliest bios revision of the P8Z77-V Pro. Could be he just needs a bios update

Horrorxpunk get another 680 and you won't need the iGPU, and you certainly won't need to run them at 1300. I run my 670's at 1254 and they rip through everything

Edit// ahhj the bios update didn't help? Eurrgghh its even starting to bug me now hah.

 

[illuz]

Meh I will just flash the BIOS on both 680 cards. Yes I have considered another 680 but not before a 1000w platinum XFX unit

Plus VirtuMVP does not work well with SLI, not well at all.

What do you have atm? You don't need a 1000w platinum mate, trust me. I'm using an 850w silver and I know it'sstill got pplenty to give.

Hope that helps setter mate!

 

[illuz]

Awesome to see this sorted mate

 

[illuz]

Crazy crazy clock 8 pack :O

Add them all when I get home!

 

[illuz]

Wow 8-Pack

Managed to improve a little bit with some Sammy Greens

Spoiler

Can't get close to the 5.3 clocks you guys are hitting.

On the bus home now, add it soon but nice score there! Try 2200+ with 9-11-11-21 mate, my sticks like those timings better.

 

[illuz]

Updated the main table. Kaktus, your last entry was 5.1GHz, push it up to that with your new memory and you'll hit 6m 32s I bet .

In the 5.3Ghz club now with ram clocked at 2200 Mhz. Just tuning up so won't be long

I don't see no picture, hope your chips alright

 

[illuz]

Woops, updated

 

[illuz]

Actually chip and everything is fine it's just pulling up a decent score; it's not performing quite aswell I wonder if there is some throttling issue will have to check up on that and not got the ram frequency that I want yet before I submit. no point submitting lots of pointless failures. 5300 went through superpi no problem I have been contemplating the 5.4

Just be careful with the volts!

its nice to see the up7 top of the table

Yeah, it's definitely my board of choice once I've water cooled everything.

 

[illuz]

The higher your CPU clocks go, the harder it is to keep the high clocks on the ram. What you got it running like currently?

 

[illuz]

When you're at your limit, that's it unfortunately

 

[illuz]

New chip in hand that does 32mb at nearly 6.9ghz I expect some improvements over the next week or so.

On Maximus V use Super Pi Tweak in Bios and XTreme Tweaking enabled for instant improvements.

Sub 5 minutes definitely. Insane score, go for 7 giggles!

edit// horrorxpunk, go for the fastest CPU core you can achieve, THEN start low with your memory and push that as high as it'll go.

 

[illuz]

Unfortunately computer refuses to boot into windows 8 @ 5.4Ghz I just get a black screen 5.3 is near perfectly stable and the voltages are a little lower than what others have used. I will have to use 2000 memory because the timings I get at 2000 give me around 34,000 efficiency score... or I may just buy some 2666Mhz Dominators haha

See how far you can push into 5.3GHz with the BLCK