Official Unigine Heaven 2.5 Benchmark Scores

Phase · 31 May 2011 at 21:45

w3bbo said:
Yeah and if tesselation wasn't enabled your score would increase. If I allow your score then I am opening a can or worms for others to post half assed results (no offence intended). Gotta keep some sort of order amid all the chaos .

Its kool mate, Next time im bench testing will do another run. Dont need to worry though it was real with no hacks,evan tryed XP SP3 to see if i could get a better score. To save other ppls time dont bother its rubbish

It does like win7.
Didnt even keep the SS only keep them for HWbot.

w3bbo · 31 May 2011 at 22:36

whipgeez said:
can i run it on 800 x 600 no aa or tesselation?

lol

Phase said:
Its kool mate, Next time im bench testing will do another run. Dont need to worry though it was real with no hacks,evan tryed XP SP3 to see if i could get a better score. To save other ppls time dont bother its rubbish It does like win7.
Didnt even keep the SS only keep them for HWbot.

Cool, once you get the SS up I'll update the leaderboard with your score. Thx.

Phase · 31 May 2011 at 23:30

Should have a 3rd 69 so going for top10

FMTopfan · 1 Jun 2011 at 10:03

Phase said:
Its not mine with 9.1?

Ah! You quoted trigger-happy and I stupidly mistaken that for your own post - never done that before but it was midnight :rolleyes:

Question to trigger-happy: I did find it weird (probably drivers) how you can get 134.0 fps but your min was right down to 9.1 fps. Any reason why this happened and does the same happen with re-runs?

Phase · 1 Jun 2011 at 11:10

Only happends with photo shop

lol jk.

Mine does it when i use HWbots Heaven benchmark.

Avathar77 · 2 Jun 2011 at 17:49

How is my attempt?

Heaven 2.5HD6970 925 1375 WC Room temp 24c 1680x1050 end by Avathar77, on Flickr

Q6600 @ 3.24 with EIST and C1E Enabled.
HD6950 with Full Shaders 925/1375 @ 1.175V

FMTopfan · 2 Jun 2011 at 18:21

Improved my score by just 55 to 1599, position in table remains unchanged.

Ati 5970 B.E 790/1130MHz (11.5b drivers) + 2600K @4.9GHz (1.40vcore, HTT disabled).
I tried 1150MHz without and then with volts increased but got BSOD, not very oc friendly this GPU.

FMTopfan · 2 Jun 2011 at 18:31

Avathar77: Your score is quite low for CFX, if it was just one 6970 then it's a fair score. Check in AMD CCC under Information > Hardware that it is detecting two 6970s.

Your Q6600 maybe bottlenecking the GPUs as my old QX6700 did the same with 5970. Otherwise re-install 11.5 drivers and 11.5CAP2 AppProfiles.

Xelene · 2 Jun 2011 at 19:14

Avanthar, that looks about right for a 6950 clocked to 925

Avathar77 · 2 Jun 2011 at 19:15

Err it is just one 6950 unlocked to full shaders and over clocked to 925/1375 with 1.175V just using 11.5 drivers.

Edit: does any one know of the safe volts for a 6950 over clock?

Phase · 2 Jun 2011 at 20:00

I use 1.12 volts @ 900/1375. Spose it just depends how often you upgrade. Every 12mth 1.3volts is good, More volts less life

Avathar77 · 2 Jun 2011 at 20:34

Ok so here is my proper Overclock result so far

Heaven 2.5HD6970 1000 1375 @1250V WC Room temp 24c 1680x1050 end by Avathar77, on Flickr

Q6600 3240MHz 4GB DDR2 HD6950 2Gb Unlocked 1000MHz Core 1375Mem 1.250V

Please add me to the list as well. Thanx

Phase · 2 Jun 2011 at 20:53

You have more in that card

trust me

1050/1400 @1.3V

Phase · 2 Jun 2011 at 22:04

Done a new run cos the last one didnt fit

6950 unlocked shader only + OC Air cooled 1065/1513 O this is one card,Had to RMA the other

insejn · 4 Jun 2011 at 14:24

With the 6950 in sig. I can't get it to go past Scene 7 with more than 880/1300 unfortunately.

Phase · 4 Jun 2011 at 16:45

insejn said:
With the 6950 in sig. I can't get it to go past Scene 7 with more than 880/1300 unfortunately.

Whats your volts? have you got SP1 installed?

If i install SP1 it does the same for me.

insejn · 4 Jun 2011 at 17:18

Phase said:
Whats your volts? have you got SP1 installed?

If i install SP1 it does the same for me.

Aha SP1 okay that might be it then. Thanks for the info.

Tried various settings with the "power control" to no difference.

I'm very happy with the performance already now so will stay off tweaking it more... I think...

Phase · 4 Jun 2011 at 18:36

If you remove SP1 let us know if that works.

BaDBoY_uK · 4 Jun 2011 at 18:41

Can you just remove it without a fresh install?

Phase · 4 Jun 2011 at 19:54

Yup,add and remove and click the show windows update doda.

Badboy i see you have a GT for Physx i thought the lastest ATI drivers stopped that?

Competitor rules

***Official Unigine Heaven 2.5 Benchmark Scores***

Official Unigine Heaven 2.5 Benchmark Scores