**Official Unigine Valley Leaderboard**

[Geeman1979]

Your getting closer to me frosty keep pushing just a bit more

The Frosts in a benching mood

 

[Silent_Scone]

Nah that's me done for the day LOL.

As much as I'd love to beat a Classy Ti with a ref card it's not happening

 

[Geeman1979]

Nah that's me done for the day LOL.

As much as I'd love to beat a Classy Ti with a ref card it's not happening

Still a good effort though

 

[Silent_Scone]

Still a good effort though

I honestly think if kept below 30c at all times I'd be able to do 1400 core, but that's a tall order

 

[Nickolp1974]

Still a good effort though

+1, yeah very good frosty, if it's any consulation I can't get near my old bench's, don't know if it's the mobo(on formula when I did them) warmer spring temps, GPU or something else??? I dunno???

 

[Silent_Scone]

ta

It is starting to warm up yeh, although my desk is right next to the window, ambient at idle around 21c in the case

 

[Nickolp1974]

My waters at about 21c and when I did my best runs it was about 13c idle with fans on full whack and windows open, likes been said before think gpu needs to be kept under 40c at benching clocks/load.

 

[Silent_Scone]

13c idle water temps????? That's super low. My lowest is 18c and that's when you turn it on lol . I'm guessing you mean GPU idle temps?

 

[Nickolp1974]

13c idle water temps????? That's super low. My lowest is 18c and that's when you turn it on lol . I'm guessing you mean GPU idle temps?

No that's what my water temp was when I switched system on in the morning during the winter months. Me and the mrs don't like a hot house!! We would only have heating on in the evening for about 3 hours.

I'd say then ambient/air temps were about 10c and after idling for about 20mins water temp was around the 13c mark after benching for an hour or so water would be around 20-21c
Water gets upto around 28-30c now whilst benching, so I'm a good 10c warmer overall which is probably why I can't get past 1390mhz currently

My water temp is taken from a G1/4 plug sensor on my top 240 rad.

 

[whyscotty]

Hehe, I have mine set to 160% @ 1.212v just for the sake of it, but that's .



Clocked another run. Neil, those timings seem to be working Cheers

Although this run was at 1375 @ 1.212v. EFFICIENCY SUPREME.

780Ti Ref 1375/1900

4960@ 4.8

Spoiler

Nice score and good

130 here, anymore is just greed.

Pfft

 

[Silent_Scone]

Very nice water temps. Then again I do have three cards so I can't expect miracles lol.


Ta Neil, and thanks for linking! Both prim and second seem to be settled in nicely at 1.7v no less

 

[whyscotty]

Very nice water temps. Then again I do have three cards so I can't expect miracles lol.


Ta Neil, and thanks for linking! Both prim and second seem to be settled in nicely at 1.7v no less

Glad I could help

 

[humbug]

Done.

 

[Nickolp1974]

I do only have a CPU and 1 gpu on a 420x80, 420x45 and 240x45 rads, it may be overkill but once the fans are cranked up I can just keep benching with very little time gaps inbetween runs. once i have switched out the corsair SP(1450's) off the monsta rad for something more aggressive it will be even better, at the moment I can bairly feel air passing through.
Once I get another classy and mobo blocks I'm gonna try it in a dual configuration to see if that makes a differance, probably gains in some area's and losses in others.

 

[Silent_Scone]

Done.

Cheers

 

[Silent_Scone]

You've left my old single entry in there Humbug. Unless you do that intentionally, in which case ignore

 

[humbug]

You've left my old single entry in there Humbug. Unless you do that intentionally, in which case ignore

Not intentionally, but what i can do is stick it next to your new one ladled as old or previous score if you like?

 

[Silent_Scone]

Thanks but no just delete previous

 

[humbug]

Thanks but no just delete previous

Done. thanks for spotting that

 

[Silent_Scone]

NP Thanks for updating