Only MAJOR overclockers need apply - survey!

TbirdX · 24 Jul 2004 at 23:07

Small improvement...

first...

Then...

The 2nd was with the abit sirens going off the whole time

and finally...broke 2.6,

Brwmogazos · 25 Jul 2004 at 00:03

shreddy that looks good man

yeah i was stuck at 1.648...now if i can push the Vcore higher i will be able to go higher i hope before the cpu maxxes first...

Cathar · 25 Jul 2004 at 02:37

Athlon XP-M 2500+
Abit NF7-S Rev 1.2 (doesn't like FSB's above 185MHz)

Room temperature radiator-based water-cooling

Will try for a little higher on a cool night...

TheGreatGrrrr · 25 Jul 2004 at 02:46

Originally posted by TbirdX

Could you run super pi at that speed? Would be interesting to see how much of a difference 256kb L2 cache makes on the bartons compared to thoroughbreds. :s

busterboy · 25 Jul 2004 at 06:59

My very first attempt at O/Clocking.
Stock cooling
Asus P4C-E Deluxe

Any tips???

Fleetwood · 25 Jul 2004 at 07:27

I went from 2.5 with limited 8RDA+ to NF7-S and 2.6, then straight to 2.7 and very stable. All at 200fsb, have not tried above this. Using Zalman 7000cu HSF, 1Gb Twinx 3200LL, XPm2600, SATA WD 120Gb HDD, X800 VIVO-16pipe. The temps are between 32c and 46c at 1.8vcore. This chip also did 2.6Ghz with 1.7v and 2.5 at 1.575v.

How do you insert image ?

busterboy · 25 Jul 2004 at 07:32

Originally posted by Fleetwood
How do you insert image ?

Upload your screenshot or image to your webspace via Smart FTP or similar then just use the image tags when making a post.

eg.

Bulldog · 25 Jul 2004 at 09:01

Ok here's a couple.

Xp1700 NF7-S It did do 2.85ghz rest its sole, I have a screenice somewhere

XP2500mobile NF7 V2

P43.2 IC7-MAX3 That is stable, screenie at 4.65ghz

A64 3000+ mobile, Epox 8KDA3+ 1:1 action

CHeers

TbirdX · 25 Jul 2004 at 09:33

TheGreatGrrrr,

I didn't even attempt it, at 2.1v I was in and out as fast as I could

I doubt it would've have run though tbh

Norbert666 · 25 Jul 2004 at 11:10

XP3200 at 2700MHz unstable.

Also, my XP2500-m does over 2800MHz unstably, but I've no screenshot, and am right in the middle of a very important document I need for work tomorrow...

bcjames · 25 Jul 2004 at 11:26

Can we get different catagories for cooling. Us air people cant compete with the water/phasechange people

DaZzZa · 25 Jul 2004 at 11:27

i assume 3dmarks will be enough??

240x10 2400mhz 1.85v air cooled swiftech mcx462+ smart fan at full pelt

210x12 2531mhz 1.92v air cooled Swiftech MCX462+ smartfan

from a 2600 t-bred B, carnt remember steppings

Westie · 25 Jul 2004 at 11:30

Ok here goes.

AMD 2100+ at 2.42. 2v - Stable 24/7

Corsair XMS 3500 xms BH-5 @ 11-2-2-2 at 2.8v

Abit NF7-s Chopset voltage 1.7 - No Mods.

All Watercooled by Danger Den.

looking to get a XP-M 2500 in next few weeks. should get a good 2.7+ out of that

Ryszard · 25 Jul 2004 at 11:30

Originally posted by Ryszard

ASUS SK8V, Vcore modded, 1GB of Corsair XMS3500RE @ 2-3-2-6.

VapoChill LightSpeed cooling, 2.0V.

CPU is an AAASC stepping FX-53, week 52 of 2003.

Rys

Was that post invisible?

I don't see it in the table yet.

Rys

FreeStream · 25 Jul 2004 at 11:49

Oi mine is stable!!!!!

Jokester · 25 Jul 2004 at 11:51

Originally posted by Concorde Rules
but BSODS when it goes near 60C

Jokester

neologan · 25 Jul 2004 at 12:25

Originally posted by bcjames
Can we get different catagories for cooling. Us air people cant compete with the water/phasechange people

Only MAJOR overclockers need apply

Jackal · 25 Jul 2004 at 12:31

Thats running on:
K8VSE (no mods)
Corsair XMS 3200 LLPT v1.1, BH-5
Asetek Waterchill kit

forgot to add, it is stable

weescott · 25 Jul 2004 at 13:37

I could brake the table down into more detail but this way keeps things easier for me to update, which I will try my best to do.

austinpowers · 25 Jul 2004 at 13:41

Not really stable, stable @3.78ghz though.
Not bad for a £60 is7-e, with 1GB of pc4000 adata, vdimm/vtt mods, watercooled a with lrww ally top block.

Resized from 1600 x 1200, so lost a lot of quality.