Overclocking e6300 Problem

jongeeone · 4 Dec 2006 at 17:06

Erm, when im next in the bios i'll jot it down :|

jongeeone · 4 Dec 2006 at 17:07

This is getting anoying now. Things work but then a "not responding" box just randomly appears.

Valerian is this what you mean

CAS# Latency (tCL) 4.0 clocks
RAS# to CAS# (tRDC) 4 clocks
RAS# Precharge (tRP) 4 clocks
Cycle Time (tRAS) 12 clocks

Heres the HTML dump from CPU-Z

http://conn.mythicx.com/files/cpuz.htm

LoadsaMoney · 4 Dec 2006 at 17:37

valerian said:
under what?

CTRL + F1 then go into MIT to see it opened up.

valerian · 4 Dec 2006 at 18:37

sorry guys
it only appears in the tweaker like you say when you press ctrl and f1 first then go straight into the MIT thing
cheers

WJA96 · 4 Dec 2006 at 18:38

jongeeone said:
Heres the HTML dump from CPU-Z

http://conn.mythicx.com/files/cpuz.htm

There's another odd CPUz report. According to an earlier post the Memory:CPU ratio is set at 2:1 but according to CPUz the FSB is at 325 and the RAM is at 406. Something not right there, surely?

jongeeone · 4 Dec 2006 at 18:44

I have played about with it so much there are different results every where

jongeeone · 4 Dec 2006 at 18:45

anyone got any ideas on this

Sniper123 · 7 Dec 2006 at 22:34

Hi there,
I was in a similar situation as you when i first started overclocking my 6300

I finish work tomorrow at 12pm and will be happy to help you out if your around

PS If you happen to read this tonight i want you to go into bio's and load Optimized default's save and then then exit and return to bio's
Once your back into bio's enter MB (MIT) and set system memory mutiplier to 2.00 then once again save and reboot.
Then boot to desktop and get cpuz up, Your ram ratio should now be 1.1 and your ram timing should be 5-5-5-18(Don't worry about these timming's just yet we'll sort them out

)

Big.Wayne · 7 Dec 2006 at 22:41

jongeeone said:
specs are btw

DS3
E6300
Geil PC6400C4 (5-5-5-18 according to cpu-z?)
7900GS
OCZ Modstream 520w

What cooling you using?

danoliver1 · 7 Dec 2006 at 22:56

Test that geil ram with memtest 86 it might run windows ok but as soon as u stress it it craps out mine did. Test at stock settings mem at +0.3 volts 4,4,4,12 timings 800mhz, dont overclock your cpu yet leave that at stock.