PC Upgrade

Associate
Joined
31 Jul 2019
Posts
515
ah,many thanks for explaining it,im a total noob when it comes to this stuff but am leaning very quick and watching some you tube vids

so this is a pic of that graph on mine

https://www.google.com/search?q=jea...UIEigC&biw=1600&bih=757#imgrc=tqMDObSn29fb6M:

I think the speed with which everyone has piled in to say don't do it should give you a clue on this!

So that PSU has two 12v rails, each with a theoretical maximum draw of 216w. Factor in an efficiency loss and it's really not that good.

The Coolmaster PSU I linked above would be good - certified efficiency and capable of delivering a lot of power down a single 12v rail. (Edit: see someone else's response above)

Or something like this Zalman: https://www.overclockers.co.uk/zalman-700tx-700w-80-plus-230v-eu-power-supply-ca-098-za.html

Not sure what they are like on loudness or if that's a problem for you.

Spending a bit more money above this might get you some of: higher wattage, greater efficiency, longevity of components, modular cables, quieter etc. Getting something a bit better and overpowered can reduce the risk of needing to upgrade again. I bought my Corsair TX 850W in September 2009 and I have no reason to think it needs to be replaced with my next upgrade.
 
Associate
OP
Joined
30 Jul 2019
Posts
21
I have the coolmaster mb520 so power supply and none needed wires would be hidden anyway

may go 650W Corsair VS650, Fully Wired

or 700W Cooler Master MasterWatt Lite V2, Fully Wired
 
Associate
Joined
2 Aug 2019
Posts
11
I'm taking the plunge to build a new Ryzen system too.

Food for thought: Higher RAM frequency and go with 2600 unless uncomfortable with overclocking

Good luck! :)
 
Back
Top Bottom