Problem staring.

[DD_Crash]

Which parts are new and which parts aren't? I'm going to assume the 2080 isn't new?

New mb, now the psu, cpu (I returned the used cpu because of the boot issue) and yes the gpu is a pre loved one (with a 5 year guarantee) Memory is on its way. If it isnt the memory I will be sobbing in the corner.

5000 series launched in 2020 and the 5600 was released in 2022, so may still need the bios update.

The bios chip on the mb has a 10.10 sticker on it so it hopefully will be ok.

 

[freddie64]

The bios chip on the mb has a 10.10 sticker on it so it hopefully will be ok.

Hopefully that is the case and sorry i missed that you said this earlier.

What CPU cooler have you got?

Sometimes a over tightened cooler can cause problems.

If it is screw mounted, try loosening the screws a quarter turn. (try another quarter if it still does not boot)

 

[DD_Crash]

What CPU cooler have you got?

It is the stock larger amd cooler with the copper plate on the bottom.

 

[DD_Crash]

The plot thickens. I get the bios screen showing the processor and memory good but no drives found. Sata ports are enabled ( AHCI) spinney drive now in port 3 nvme m2 drive swapped for sata m2 but still nothing showing. Bios is latest 10.10. I feel a bit miffed.

 

[Tetras]

The plot thickens. I get the bios screen showing the processor and memory good but no drives found.

What fixed it?

Sata ports are enabled ( AHCI) spinney drive now in port 3 nvme m2 drive swapped for sata m2 but still nothing showing. Bios is latest 10.10. I feel a bit miffed.

CSM enabled or disabled?

 

[DD_Crash]

New memory now gets me to the bios screen I will look at CSM tomorrow and when I find it I will change it to what it isnt at the moment.

 

[Jamin280672]

New memory now gets me to the bios screen I will look at CSM tomorrow and when I find it I will change it to what it isnt at the moment.

Whats the new RAM ? and what was the old RAM ?

 

[DD_Crash]

both 8gig x2 Duff one was corsair vengeance 3200 new is kingston fury 3200

 

[Jamin280672]

both 8gig x2 Duff one was corsair vengeance 3200 new is kingston fury 3200

I dont recommend anyone to buy Corsair RAM, seems to have the most compatibility issues, I just think its cheap for a reason, I usually go for G.Skill, never had any problems with it, multiple kits seem to be on every board makers QVL, the only downside is it can be expensive.

 

[mickyflinn]

I dont recommend anyone to buy Corsair RAM, seems to have the most compatibility issues, I just think its cheap for a reason,.

Or could it be that Corsair sells a lot more memory than others and therefore the failure rate is exhasabated.

 

[something daft already!!]

It's rude to stare. I've been running Corsair RAM for years and not had any issues. This is my second lot now.

 

[DD_Crash]

CSM enabled or disabled?

Tried both settings, so back goes the board. At least I get the bios screen so I know that the cpu psu and memory are good.

 

[DD_Crash]

Another update. Bought a Asus Prime 520M and now it all works fine. I am glad I bought the psu tester as I connected to front panel plugs to a usb header.