[Project Log] "Parvum|Beast" - Semi Sponsored Build

[DeuS1]

Finished Filling The Loop!!!

UPDATEEEEEEE!!! .. I finally finished the leaktesting, and the loop is filled up and complete!
I absolutely LOVE the color of the EKWB Ekoolant UV Blue !!! .. Loops amazing, espicially under the illumination of the led strips
unfortunally one of the 2x45 degree fittings from GPU to Mosfett block has a minor leak, once every 3 hours it has gathered a tiny drop of fluid ..
So thinking that maybe i need to change the O-ring, and while i'm at it, i might just remove it and maybe do something like
45 degree fitting - tubing - 45 degree fitting, instead, to show a little more tubing in that area..
but will deal with that tomorrow morning..

For now, here's some images of the loop with the iv blue liquid.. Enjoy!

So what's left to do? Still need to figure out something neat with the SSD drives,
also still need to do the 8pin cpu sleeving and cable management.
And last but not least i need to install the lighting..
BUT the next 2 weeks i have a lot of work to do, and no time what so ever to finish the build..
So unfortunally you guys will have to wait 2 weeks for the final images and updates.. <3

 

[DeuS1]

Nice, Very impressive so far

very nice so far

Looking pretty sweet

sleeving looks nice.

Thank you all very much for your kindness !

 

[DeuS1]

UPDATEEEEEEEE

Just got home from 14 days with 200 hours work !!!..
so finally have time to finish this little Beast! ..
I just finished the rest of the sleeving, and the cable routing ..
Only thing left do to is installing the led strips,
and then FINAL IMAGES !!

Hopefully i will get the rest of the work done by thursday, so that i can use the weekend to do the editing of
the final images, and the video tutorials

Stay Tuned Guys - Final images will follow very soon !

 

[DeuS1]

Cable routing, res change and M logo on GPU

Okay, so after 14 days with 200 hours of work, i finally had the time to work on the beast again!
I started doing the cable routing, and have done all the rest of the sleeving i needed to finish..
Still a long way to go with the cable routing tho, as i am awaiting new sata sleeving, hopefully be here monday !

I also finally got the last piece from parvum, that was originally going to be the SSD housing,
but something went terribly wrong with the meassurements(prolly my side), so couldnt use it at all :/
So instead i took the Monster logo inlay in blue acrylic, and put in on top op the Gpu instead,
left the black vinyl beneth to give it a "drop shadow" like effect

And i made some changes to the reservoir sleeve, had to cut off some of the black binyl on the back, to give it the effect i was looking for.
I took a picture of it so you can see what i mean.. Pretty sure when i am done with installing the lighting in the case,
then it's going to look awesome!..

Anyways here's some images, while i work on installing the lighting,
also i am awaiting new uv leds, to arrive monday as well, so final images will be done mid next week..
Same with the Sleeving and EK block polishing guide videoes

Hope you like it so far, really in love with the LC Teleios sleeving!. looks so good in this build!.

 

[DeuS1]

Done Routing cables, Trying out blue Mesh​

So i just finished the cable routing ! im pretty happy with the result when you think of how little room there actually was for this,
cause of the size of the AX1200i ..
Also, i have been trying to figure out what to do for rad covers to be shown on the outside..
And i found some mesh laing around, spray painted it blue, and tried to put it loose on top of the rads..
Actually think it's lokking kindda cool, color matches okay too now to find a more permanent solution with it

What do you think guys ? looks pretty good right ?

Also still trying to figure out what do do with the PSU to make it blend in the black/blue theme..

Going to install lighting very soon, so i think next images will be final images !!!!! : D​

 

[DeuS1]

!!!! - FINAL SHOTS - !!!!

IT'S DONE !! The Parvum|Beast is finally finished...
Sorry it took me so long to finish, but with 100 hour work weeks on my regular job, it got kindda hard to find the time to work on the Beast..
BUT time to share the final images with you guys..
I am very happy with this build, put a lot of attention to details into this one, and also a lot of blood and tears ! ..

I will make the sleeving video, EK Frosted Block polishing video, and some other stuff tomorrow, and hopefully get it out to you guys before thursday..

Thanks for all of you who have followed this build,
and a BIG BIG BIG Thanks to:
Coolerkit.com - EKWB.com - Mainframecustom.com
For their support and help making this build more than just a dream ! <3 ..

Now THE IMAGES !!

Again thanks for following this build guys, and thanks for the humongus support on my facebook page "BeckModZ - Liquid Designs"
I can't believe that this build gave me over 2000 followers on my facebookpage .. THANKS GUYS!!! ..

 

[DeuS1]

Feel Free to share your thoughts on this build, would love some feedback !

 

[DeuS1]

This is pretty neat. Love the blend of colours and materials. Nice job

Thank you very much !

 

[DeuS1]

Thank you very much guys .. that was the goal,, make it look smexy as hell

 

[DeuS1]

more feedback please

 

[DeuS1]

wish i had my photography skills when i made this build