After a very long weekend I have finally got a working PC =D
There are few things that still need doing however
The front side panel still needs to be finished.. Awaiting grill for one of the fans.
The top shroud will need to be added as well... Again im waiting on that to get posted =)
Got some porblems with air in the loop... not quite sure what to do here because of the way i have the resivoirs setup... I cant move them, so any other suggestions would be great, thanks =)
Problems I encounted...
Well the biggest one with this wa the fact that due to the thickness of the poweder coat, the side panels dont seem to fit on snugly anymore... So at the end of the day, I had to drill some holes in the top and attach with self tapping screws... not glamorous... but it works!
Also have problems with my LED connections on my fans.. they kept breaking...
Anyways, let me show you what it looks like =)
Graphics Card,
So I forgot to add some pictures of the graphics card and blocks last time so just took a few before i installed it.
Side Panel fans.
Because the grills are quite constricting with regards to air flow i decided to have the grills raised from the panel by 5mm. Adds some more body to the case too =)
Radiators =)
The bottom Rad was a tight fit which is probably a good thing, becase its holding up the middle panel =P
Resivoirs & Pumps
They are drilled into the motherboard tray.. Big issue with this is if i want to move them, then i would need to drain the loop because the res will be come detached from the pump.
Loops and internals.
The loops were a bit tricky to setup.. lots of kinkin so had to use come coil in places unfortunately..
Work in Progress.
I took a few random pictues during the build , thought i would share
Adding Coolant
Overall
Lights!!!
These arent very bright... actaully they are rather dim.. but I still think they look OK
Thats about it for now.
There are few things that still need doing however
The front side panel still needs to be finished.. Awaiting grill for one of the fans.
The top shroud will need to be added as well... Again im waiting on that to get posted =)
Got some porblems with air in the loop... not quite sure what to do here because of the way i have the resivoirs setup... I cant move them, so any other suggestions would be great, thanks =)
Problems I encounted...
Well the biggest one with this wa the fact that due to the thickness of the poweder coat, the side panels dont seem to fit on snugly anymore... So at the end of the day, I had to drill some holes in the top and attach with self tapping screws... not glamorous... but it works!
Also have problems with my LED connections on my fans.. they kept breaking...
Anyways, let me show you what it looks like =)
Graphics Card,
So I forgot to add some pictures of the graphics card and blocks last time so just took a few before i installed it.
Side Panel fans.
Because the grills are quite constricting with regards to air flow i decided to have the grills raised from the panel by 5mm. Adds some more body to the case too =)
Radiators =)
The bottom Rad was a tight fit which is probably a good thing, becase its holding up the middle panel =P
Resivoirs & Pumps
They are drilled into the motherboard tray.. Big issue with this is if i want to move them, then i would need to drain the loop because the res will be come detached from the pump.
Loops and internals.
The loops were a bit tricky to setup.. lots of kinkin so had to use come coil in places unfortunately..
Work in Progress.
I took a few random pictues during the build , thought i would share
Adding Coolant
Overall
Lights!!!
These arent very bright... actaully they are rather dim.. but I still think they look OK
Thats about it for now.
