Radiator question Swiftech H20Apex Ultra Plus Watercooling Kit)

Any ideas how I get rid of these bubbles and froth been running in a loop now for around 2 and half hours

Leak Free! :D

Its just the froth now
 
weescott said:
Top the system up if you can, tilt the system to get the trapped air.
Click to expand...

I've topped up the res and its at the desired level I think.Above the minium res line anyway.


do you mean just tilt the whole case over on its side?

Is this safe?

lol
 
Think I have cracked it!

I did another case spin and changed the speed of the pump to number 2.

I would say there is 75% less bubbles :)

Will leave running another hour to see :)
 
Hi,

All up and running:)

I am amazed at the temps.

before on air dul prime at stock 2.4ghz I was getting 52c dual prime
Now I'm getting 33c full load dual prime

I am loving this water setup and thats with the fans on silent with a fancontroller.:)

Thanks to everyone for helping me get up and running

I will post some pics later tonight if anyone is interested let me know.
Some feedback is always good from the water babies lol :p
 
PICT0569.jpg


Mounted the pump at the side of the Akasa Eclipse it was a perfect fit.Also the wheel holes lined up perfectly with the pump holes so I just used a longer screw to bolt the pump to the case....No drilling.

The res is mounted on the side of the CD rom bays high up ...again a great fit.

PICT0570.jpg


Cut out the honeycomb at the bottom for one tube and secured with rubber washer for a nice fit and to protect the tubing.

PICT0568.jpg


Also I just cut the PCI slot away keeping the screw hole in place just in case i need to install a card.

PICT0572.jpg


Side view with everything in place and I am pleased with the result. :D
Let me know what you all think.And thanks again peeps for guiding me through my first watercool.
 
You must log in or register to reply here.
Back
Top Bottom