• Notice regarding image hosts and attachments. See here.

Road Cycling Essentials

Status
Not open for further replies.
Giving my legs a rest today, i cycled every day into work last week and ran at the weekend. Everything aches so i couldn't face jumping on the bike, especially because i've got a beast of a hangover.

Can anyone recommend some decent fingerless gloves? I'm a big wuss so padding is very much desired. To be honest any decent summer-wear recommendations would be brilliant as i started cycling this winter so all of my kit is winter-based. I'm already starting to feel a little toasty so i'm going to die when it gets really warm.
 
I'm thinking about getting a single speed for pottering to the shops and going to the gym on.

What should I do out of buy new (unlikely - want something that I don't have to care about as much as my carbon), buy second hand or make myself from 2nd hand and new bits? Also what material should I want for the frame etc?
 
Back in this thread, been dormant. Been really unhealthy for a year or so (too many fatty foods..), ended up putting 12kg!

Back on the bike regulary now, lifting weights again and eating sensibly, already dropped 1.5kg in a week.

Currently doing 28 mile roundtrip commuting on my Wilier 4 times a week. It's actually the time of year I hate, when everyone commutes in :P The best time is in the dead of winter, when our bike parking is literally empty bar 4 or 5 cyclists. Now it's rammed with >50 bikes!
 
buy second hand or make myself from 2nd hand and new bits? Also what material should I want for the frame etc?

I would go for an old steel frame. You can get them really cheap on ebay and a lot of them have horizontal dropouts so you can run it singlespeed without a tensioner.
 
I'm thinking about getting a single speed for pottering to the shops and going to the gym on.

What should I do out of buy new (unlikely - want something that I don't have to care about as much as my carbon), buy second hand or make myself from 2nd hand and new bits? Also what material should I want for the frame etc?
Well I've built all of mine from old steel-frame racing bikes. The Viscount is a 1970's British bike that I got off Freecycle. I junked the gears, took the smaller front ring off and rebuilt the back wheel with a flip-flop hub. This lets me ride fixed or use a freewheel, depending what way round I have the wheel. I put my own saddle and pedals on too. The Peugeot came to me with track hubs on it, so this was already done. The Bob Jackson I built completely from scratch - I bought a late 70's TT frame and built it up with new retro-looking components.

You could buy new but you're looking at £350. The advantage about tatty-looking older steel bikes is they're largely bulletproof, they get ignored when they're chained up and they're comfortable to ride.

Viscount before:

IMG_5451.JPG


Viscount after:

IMG_7423.JPG


Peugeot:

IMG_6135.JPG


This is a 'flip-flop' track hub. It has threads on both sides for a freewheel on one side and a fixed non-freewheeling gear on the other:

IMG_6136.JPG


Bob Jackson:

IMG_7444.JPG
 
I saw that Bianchi locked up outside a restaurant I went to on Friday night! Really really nice looking bike, although at the time I didn't realise it was genuine/so nice/expensive.

Also, am I right in thinking that they don't have brakes and they're fixed rather than single?
 
Last edited:
Just do not what ever you do go anywhere near a "create"

I have a 2006 Aluminum Langster, it's stupidly lightweight but ride is rather stiff!
 
This frame is too big for me but is this the right kind of idea/price/etc? http://www.gumtree.com/p/for-sale/retro-frame-perfect-fixie-build-only-50/97176270

Yep, thats the sort of thing.
The dropouts (where the wheels bolt in) are long slots, so you have a bit of adjustment of the chain tension by sliding the wheel back. Modern frames usually have a hook style dropout that wont let you change the position of the wheel, so you need to use a tensioner with them.

You'll probably get something cheaper than that on ebay. Example
 
Last edited:
I forgot to point out that building from scratch is damn expensive. The cost of individual parts comes out at much more than a whole bike, so it's best to look for a complete bike that you like which has all or most of the right parts on it already and make your changes from there. Building a nice looking pair of wheels will set you back at least £100 if you know where to look for the parts, new SS cranks that don't look spazzy will be £65+, pedals and clips £25+, saddle (e.g. Brooks on an older bike £60+), bars and brakes, tyres, seatpost. It adds up pretty quickly.
 
I have recently got one of these: Revolution Track for in town. It's great fun to ride, and is also pretty light - a bonus as I keep it in my flat.

It's a pretty compact frame; I'm just over 6ft and the 58" is by no means too big.
 
Status
Not open for further replies.
Back
Top Bottom