• Notice regarding image hosts and attachments. See here.

Road Cycling Essentials

Status
Not open for further replies.
Although it wasn't bought through Wiggle I wonder whether they'd be able to help you? It may be worth e-mailing them to try, they have a full team of CyTech qualified mechanics and are the only other retailer of Boardman bikes in the UK.

Really feel for you though, it must really suck.
 
The Kona is a solid bike, see quite of a few of the older ones quite often and they are still going strong.

I don't understand the problem with the bike, there is only so many parts to the front end. The new fork does have a carbon steerer tube still? They have to cut it when they get a new fork, did they cut it to the correct length? My only other thought could be they used the wrong headset? It would be pretty obvious if a 36x45 was fitted on a 45x45 frame. A 45x45 wont fit in a 36x45 frame anyway.
 
It almost certainly is; the symptoms are exactly the same. The guy told me he had used a different expanding bung this time to compress the headset, i'm assuming this one is even worse than the old one due to it failing even quicker. The stem just doesn't seem to be able to hold on to the headttube properly.

It was quite terrifying, going 30mph downhill and trying to turn out into the road to avoid a parked car, only to be met with the fork suddenly jerking me the other way.

So what is the actual problem? The stem doesn't connect to the head tube, it connects to the steerer or steer tube.

I suggest you remove the top cap and completely loosen the bolts on the stem. Then replace the top cap and tighten down - just enough to remove any lateral play, but not so much that the headset binds. Then tighten up the stem - equal amount on each bolt (keep swapping between bolts each turn).
 
So what is the actual problem? The stem doesn't connect to the head tube, it connects to the steerer or steer tube.
This.
If the stem is coming lose from the steerer tube, the headset has nothing to do with it. The only things involved in that interface are the stem, stem bolts and steerer tube.

Is it possible that, if your old steerer tube was cracked, the guy in the shop didnt tighten the stem bolts too much because he was worried about cracking the new one? I cant really think of anything else that could cause the stem to come lose.
 
hello roadies.

Looking to change from MTBing to road cycling as i just dont do enough MTBing to make it worth carrying on.

Question though, can i still use my spez expert MTB shoes with Road clipless pedals??
only ask as i dont fancy buying another pair of £100+ shoes lo

p.s if you had £1800ish to spend what road bikes are good? (cycling plus bikes of the year good place to start?)
 
Question though, can i still use my spez expert MTB shoes with Road clipless pedals??

You can put your MTB pedals on a road bike (which is fine, a few people on here have MTB pedals/shoes), but your MTB shoes wont take road cleats.

p.s if you had £1800ish to spend what road bikes are good? (cycling plus bikes of the year good place to start?)

Canyon ultimate CF
Boardman Pro
Planet x RT57 (£1999)
Or something from ribble.
 
Oh, Hello!

20120426171628.jpg
 
So what is the actual problem? The stem doesn't connect to the head tube, it connects to the steerer or steer tube.

I suggest you remove the top cap and completely loosen the bolts on the stem. Then replace the top cap and tighten down - just enough to remove any lateral play, but not so much that the headset binds. Then tighten up the stem - equal amount on each bolt (keep swapping between bolts each turn).

This.
If the stem is coming lose from the steerer tube, the headset has nothing to do with it. The only things involved in that interface are the stem, stem bolts and steerer tube.

Is it possible that, if your old steerer tube was cracked, the guy in the shop didnt tighten the stem bolts too much because he was worried about cracking the new one? I cant really think of anything else that could cause the stem to come lose.

I know the problem is the stem not clamping properly (i meant steerer tube, not headtube also! I used the wrong name by accident), but i've disassembled, tightened down the top cap and reassembled it using a calibrated torque wrench several times and it never seems to hold. I've put spacers on top of the stem, hoping that the extra contact area will give the stem more grip, but it still comes loose after a handful of miles. What i meant was that i think the problem has been enhanced by this new expanding plug, which is much shorter than the original and doesn't seem to be able to grip the inside of the steerer tube well enough when tightening the top cap so it lifts out slightly, causing the forks to be loose from the get-go.

I spoke to Halfords and explained that the stem just isn't gripping properly, they're now saying it needs a new headset. As you guys have already stated (and as i know, i just accidentally used the wrong component name in my original post) the headset has nothing to do with the issue. I've contacted my house insurances' free legal advice team who will be informing me of my rights.

I think there's something wrong with the stem, replacing that may well solve the issue, but its down to more than just the bike contantly breaking. Out of the 5 months i've owned it it's been being repaired for nearly 2 and a half. Staff have been consistently rude, clearly don't know how a bike goes together (i'm an amateur and know more than them) and never return a phonecall. It's not just the bike i'm fed up with, it's the terrible service they've provided under warranty.


what about a kona jake the snake if you're looking for cyclocross?

Cannondale CAADX 105?

I can also give 2 thumbs up to my CX bike the Cube Cross Race.

Thanks for the recommendations lads. If i get a refund i will be looking very carefully at them.
 
Last edited:
I can't see it being the stem to be honest. Can say I've never came across a faulty stem in that way.

Can you take pics of each step taking it apart? I feel for you mate.
 
canyons.jpg


For some reason they sent me a shock pump with it as well?
Not sure why, but i was about to buy one for my mtb, so thats a bonus :D
 
I can't see it being the stem to be honest. Can say I've never came across a faulty stem in that way.

Can you take pics of each step taking it apart? I feel for you mate.

Fraid not, i've left it with them, can't be dealing with the pile of garbage any more!

I think i've got em on the ropes, fingers crossed. Reason i say that is that the guy asked if i'd like another bike at a discounted price, to me that seems like there's something going on behind the scenes that i don't know of. I said no though, as i've just had enough of their store as a whole.
 
Last edited:
Fraid not, i've left it with them, can't be dealing with the pile of garbage any more!

I think i've got em on the ropes, fingers crossed. Reason i say that is that the guy asked if i'd like another bike at a discounted price, to me that seems like there's something going on behind the scenes that i don't know of. I said no though, as i've just had enough of their store as a whole.

Good luck then, shame nobody seems to care so much when things go wrong.

This week I've had a carbon post sent back and a carbon frame sent back to get the water bottle bosses sorted out. You pay a lot for a bike you expect some sort of backup!

I'd contact Halfords head office and speak to an expert or something. Might have been part of recall that the staff don't know about.
 
Status
Not open for further replies.
Back
Top Bottom