• Notice regarding image hosts and attachments. See here.

Road Cycling Essentials

Status
Not open for further replies.
Just finished servicing and cleaning my bike, and all packed up for a week on the road.
Setting off Monday morning from Newcastle and riding to Paris, ending on Sunday evening at the Eiffel Tower. Should be 600 miles + any balls ups in the route.

Can't wait! :D
Will you be keeping a journal of the trip? A long distance ride like that is something I've been wanting to do ever since I started cycling again, so I'm keen to hear about your experience.
 
Knocked out 90 miles today. Made the most of the weather after a poor week and what looks like it could be another **** weather week to come.
 
I'll be keeping notes and probably doing some sort of video diary, in addition to the twitter/facebook updates and the blogs that will go on my company website (it's a charity ride with work).

We're heading down to York, then Peterborough (132 miles :eek:), Cheshunt, Croydon (just a short day - we're meeting some of the more sensible people who decided to ride London to Paris instead), Dover, Amiens, and finally Paris.
This is the route from Croydon to Dover.

It should be said that although I mapped the route for the event, it was done entirely based on hours of Google street view - I have no experience riding darn sarf :).

Edit: Should also mention that Murf is doing it too, and expecting me to lead him out for 599.8 miles before launching him up the Champs d'Elysees. He's in for a shock!
 
Last edited:
Managed 52 miles this morning had a good ride until the wasp found it's way into my helmet and stung me :(

Doing more hills is going ok managed 1800ft of climbing and also managed to get past on the hills by a guy on a touring bike :(
 
Doing more hills is going ok managed 1800ft of climbing and also managed to get past on the hills by a guy on a touring bike :(
Nothing to be ashamed about. I've passed guys on carbon bikes in full bike gear while I'm on my Raleigh RSW in a shirt and a bag slung over my shoulder and they must feel pretty stupid when they happens. a) he might have just set out and you've been riding for a bit; b) some people are just fitter than you, or are more cut out for cycling. On the flipside, almost every week on my 5k Parkrun I get passed by a woman in her late 40's and a guy running with a pushchair :p
 
That's what I always pretend when I get overtaken; that I'm in the last stretch of a 100-miler :p.

Although I rarely get overtaken now on my commute :cool:. Or, to be fair to myself, on the last sportive I didn't!
 
Last edited:
That's what I always pretend when I get overtaken; that I'm in the last stretch of a 100-miler :p.

Although I rarely get overtaken now on my commute :cool:. Or, to be fair to myself, on the last sportive I did!

Or you could do what we runners do and just lift your arm up and look at your watch.
Mind you, and I bet this has happened to some of you cyclists, I remember one runner speeding past me on the canal and off he went into the distance.
What he obviously wasn't expecting was that I was coming off the canal to run up a road where I saw him slumped on the floor and I stopped to ask if he was OK.
He just looked at me in embarassment and I said you have to learn to pace yourself :)
 
Guys, I could really do with some help getting my bike set up correctly.

I've been road cycling now for the best part of 6-8 months, covering anything from 25 to 50 miles twice a week. I go out with a few friends who know some nice routes away from the traffic which is great. The reason I went for a bike fit was because I've been getting pain in the outside of my right knee. He examined my knee and gave it the all clear so it's down to my bike setup not a knee issue (yet!).

They told me the frame is one or possibly two sizes too small for me, it's a 56cm horizontal top tube whereas my inseam suggested a 59cm would be more suitable. They've changed the stem from 90mm to 120mm to give more reach, raised the saddle by a good few inches as it was too low, one of the causes for my knee pain as the knee was always under load due to not fully extending and also set it back slightly to give the most length out of the bike as possible.

So, feeling all nice and comfortable on the turbo trainer in the studio I was excited to get back on the saddle again to pain free riding.

On Saturday I set out with my friends and stopped off at the usual 10 mile coffee shop. Getting back on the bike after the coffee and less than a mile after my knee started to become uncomfortable. We ended up cycling 48 miles and from 15 miles onwards both my lower back and knee was in pain. All day Saturday after the ride my back and knee were in pain, that I can still feel today.

Surely not everyone swings there leg over a bike and gets it right first time? What am I doing wrong? :( :(
 
The lower back pain could be caused by having the longer stem, you'll be bent over further than you're used to.

Are you using SPD's on the bike and are they set up correctly? They can cause knee pain if not alligned properly with the shoes.
 
The lower back pain could be caused by having the longer stem, you'll be bent over further than you're used to.

Are you using SPD's on the bike and are they set up correctly? They can cause knee pain if not alligned properly with the shoes.

I'm using SPD's, and I've aligned them by sitting on a table and letting my legs and feet relax and noting what angle they naturally fall to and set the cleat to match this angle. These are SPD's and not road bike type SPD-SL's.
 
Lead Head, I'd pay for a proper bike fit. There's too many variables to get it right by yourself if you are inexperienced. Although the lower back pain could be caused by a longer stem, it can also be caused by a frame that's too big, or a lack of flexibility and core strength.
 
Knee pain could be any number of things, most likely cleat positioning.

Back pain sounds like a result of the frame being too small. Raising the saddle makes your bum higher but increases the drop between saddle and handlebars. You've put on a longer stem to take into account the short top tube but unless it's got a massive degree of rise on it you are still going to be bending over a long way. I would suggest your problem is a short head tube on the small frame.

If it's any consolation I did exactly the same and bought a frame that was too short and had the same issues.

Get a bike fit. Most shops will discount it from the cost of whatever you buy as a result of it.
 
Did the Henley loop again yesterday. Went with a friend, but I pulled the entire way. Finished 5 mins faster than last week, so that's 12 mins knocked off a 33 mile route in 2 weeks. Very happy :)

Was 1.5 MPH faster on the steepest climb as well, which is at the end. Still not as fast as Wiggins though :(
 
[DOD]Asprilla;22114257 said:
Back pain sounds like a result of the frame being too small.

As I said, it can also be as a result of the frame being too big. The top tube being too long, resulting in a compression of the spine. This is exactly what happened to me when I bought my Super Six. I went for the 56 instead of the 54, and ended up having to use a 80mm stem, which completely borked the handling.
 
Status
Not open for further replies.
Back
Top Bottom