• Notice regarding image hosts and attachments. See here.

Road Cycling Essentials

Status
Not open for further replies.
Does anyone here ride on a turbo? If so what do you use tyre wise? Do you just use a seperate wheel with a turbo tyre on? Ive done a few sessions on my fairly old gp4000s and it's chewing it up.

I have a spinning bike at home but i dont use it much - i hate riding indoors.
If i was going to use a turbo often i would get a spare wheel with a turbo tyre.
 
Just get a cheap wheel on ebay/gumtree/etc.
Any old wheel will do, there's no weight on the wheel when you're on the turbo.
 
New tyres have arrived :)

iypitg.jpg
 
Just back from my mini fitting.
Was very interesting, starting with getting my bike on a turbo trainer linked to a cadence meter and pc. Then rolled about for a bit at a nice 85 rpm and watched me pedal.

Then came out the sticky labels and lasers.
Started looking at my cleat position so took my shoes off, cue the obligatory "God lord how flat are your feet? They are the flattest I've seen!"
We then made lots of nice little adjustment to the seat post, cleats and saddle til that was all correct.

Then on to the stem and bars. I was right it was short, far too short in fact. I've got from a 90mm to a 110mm!
This took a lot of to-ing and fro-ing on a adjustable stem. But I could see from the mirror my arms are now in a much better postition, I can get down on the drops with fear to catching my knees and my back is a lot straighter.
Then a final spin for a few mins at a good high-ish rpm so check it all looks good.

The results were very good, power wise I'm not that strong however my technique is good.
A nice 50/50 split between both legs and the power doesn't come in peaks and troughs, very smooth over the full 360 spin.

Got a 110mm stem while I was there, big decision as to white or black, when for white and I think the results look lush.

IMG_20120419_194204.jpg


Although I found I forgot to take the labels off before I rode home so was looking odder than normal.

edit The pic isn't great but it's raining so didn't want to stay outside for any longer than I need.
 
To Asprila, yup all teched up and Paul was very friendly and explained what everything meant and what we changed.

To clv, maybe a bigger frame might have been better but this is what I was advised originally, and a longer stem is a lot cheaper than a new frame. I like how she rides, when I've got to the point that a new frame is needed then I might go the next size up. It also feels close ish frame wise to my mtb.

Also I don't know how it would effect sizing but I've got long limbs in relation to my body which also swayed my original choice, I'm only 5'7 (at best) but leg wise Paul estimated me to be 5'8 or 5'9.
 
Last edited:
Just back from my mini fitting.
Was very interesting, starting with getting my bike on a turbo trainer linked to a cadence meter and pc. Then rolled about for a bit at a nice 85 rpm and watched me pedal.

Then came out the sticky labels and lasers.
Started looking at my cleat position so took my shoes off, cue the obligatory "God lord how flat are your feet? They are the flattest I've seen!"
We then made lots of nice little adjustment to the seat post, cleats and saddle til that was all correct.

Then on to the stem and bars. I was right it was short, far too short in fact. I've got from a 90mm to a 110mm!
This took a lot of to-ing and fro-ing on a adjustable stem. But I could see from the mirror my arms are now in a much better postition, I can get down on the drops with fear to catching my knees and my back is a lot straighter.
Then a final spin for a few mins at a good high-ish rpm so check it all looks good.

The results were very good, power wise I'm not that strong however my technique is good.
A nice 50/50 split between both legs and the power doesn't come in peaks and troughs, very smooth over the full 360 spin.

Got a 110mm stem while I was there, big decision as to white or black, when for white and I think the results look lush.

Although I found I forgot to take the labels off before I rode home so was looking odder than normal.

edit The pic isn't great but it's raining so didn't want to stay outside for any longer than I need.

im interested as to how you get on. where and how much etc
 
Very topical at the moment, what's everyone's wet weather gear?

Pro Tarmac H2O Overshoes, Altura Night Vision Jacket, Endura Thermolite bibtights ( for chilly mornings, if warmer I'll just use PBK Team bibtights or 3/4 bibs ). Sealskinz gloves, the Extreme Cold Weather waterproof ones which are bizarrely nice and cool on warmer mornings but toasty on cold ones. :confused:
 
Depends if it's likely to rain on the way to work or on the way home. I don't mind cycling in the wet but I hate putting on wet kit. Anyway I chose from:

Endura Venturi II jacket
Rapha / Paul Smith packable jacket
Castelli Fawsome gillet
Endura Stealth bibs
BBB Ultraflex overshoes
Lake CX130 boots
Diadora Chilli Extreme boots
Altura waterproof gloves
 
Interesting to hear about the bike fitting, very tempted to get myself booked in for one.

I'm getting a bit of a sore back of my right knee and feels like can tighten my hamstring at the moment. I've always thought I've got a slightly dodgy knee as I can never get large amounts of power through my right leg, virtually zero on the pull up of the stroke, where as my left leg seems 10x better.
Hoping a proper fitting with cleat positions etc may help!
 
Last edited:
Waterproof skin. :D

Pointless trying to keep it out. Just the normal Lycra long johns and a Altura Evo jacket is all I wear.

I'm Usually soaked with sweat when it isn't raining as well. :D
 
Does anyone have a good recommendation for a torque wrench, something from about 3nm upwards.

I don't want to get something inaccurate and it cause me to over or under tighten but I don't really want to break the bank!
 
Status
Not open for further replies.
Back
Top Bottom