• Notice regarding image hosts and attachments. See here.

Road Cycling Essentials

Status
Not open for further replies.
[DOD]Asprilla;22119308 said:
New frame I'm afraid. I could have had stem with a massive rise on it, and we tried it, but it looked dumb and the handling suffered badly. The chap doing my fitting told me which frames I should be looking at from their stock and gave me max and min values for the top tube and head tube. I took it from there and test rode bikes that fitted the criteria until I bought a frame I wanted and built it up.

On this subject, I popped my measurements into the Competitive Cyclist fit calculator and it reckons my seat tube is about 6cm too short. I do have a saddle to bar drop of about 4" on my bike at the moment which, in conjunction with my poor flexibility, is probably behind my back pain.
 
155bd2a0.jpg

I approve :)
 
On this subject, I popped my measurements into the Competitive Cyclist fit calculator and it reckons my seat tube is about 6cm too short. I do have a saddle to bar drop of about 4" on my bike at the moment which, in conjunction with my poor flexibility, is probably behind my back pain.

You should go and see Adrian Timmis at Cadence Sport, he's up by you. He'll give you the best fit you'll ever have from what I've read. He's an ex-Pro, competed in the TdF etc. He should be able to tell you what frame geometry and size would suit your body best.
 
You should go and see Adrian Timmis at Cadence Sport, he's up by you. He'll give you the best fit you'll ever have from what I've read. He's an ex-Pro, competed in the TdF etc. He should be able to tell you what frame geometry and size would suit your body best.

Thanks for the tip, I will be sure to drop in before spending anything on a new bike. :) Some professional advice would be hugely helpful.
 
£350 for a carbon frame and switch my wheels / components over is tempting, providing its the right geometry.

I'd rather pick up a cheap Chinese frame from Ribble (and have) as it'll at least have a useable warranty. The evo pro carbon is only £230 so even cheaper.
 
Quick update for now and I'll provide more detail when I'm finished:

Day 1: Newcastle to York. 94.5 miles, average 19.1mph - 3540ft gain.
Day 2: York to Peterborough. 132 miles, average 20.3mph - 3762ft gain.

Knackered.

Edit: We're riding in the lead group of six and drafting pretty effectively - doubt we could maintain these speeds otherwise. :)
Not very hilly so far so expect the average to lower as the week goes on and the terrain gets more interesting.

Touch wood, no mechanicals/flats/crashes in our group so far although one of the other riders had 8 punctures in one wheel within 30 miles (damaged rim tape that nobody spotted until the last flat).

Easy couple of days next -

Peterborough to Cheshunt. 75 miles, average TBC - 2793ft gain.
Cheshunt to Croydon. 28 miles, average TBC - 1110ft gain.

:D
 
Last edited:
So I've been riding my hybrid for about 8 months now and have decided to get something more road suited. I was initially looking at 105 components but for just a little bit more I pushed the boat out for Ultegra. Ended up buying a Canyon Roadlite 7.0. Delivery is expected for about 4 weeks time so I'll be sure to keep you updated and of course get some pictures when it arrives. Excited!
 
I'm still waiting for my Cycle To Work certificate :(
I've got everything else including lock, lights, pump, pannier rack, bag, mudguards & computer but still waiting for the bike.
I'm losing interest now.
 
I'm still waiting for my Cycle To Work certificate :(
I've got everything else including lock, lights, pump, pannier rack, bag, mudguards & computer but still waiting for the bike.
I'm losing interest now.

What's the hold up? Is it your employer or who? I'm looking at signing up for C2W, which I'd have to sign up for at the start of October, so if I'm left waiting and it's November before I can get started then I'll rather be in at the deep end.
 
I'm still waiting for my Cycle To Work certificate :(
I've got everything else including lock, lights, pump, pannier rack, bag, mudguards & computer but still waiting for the bike.
I'm losing interest now.

Have you bought the bike already or not? If not then remember that you get 10% of the bike's value in free accessories!

And yeah, gorgeous weather today in the SW. Was up at 5.30am this morning and out and about by 6am - working sadly, not riding :(.
 
Getting withdrawal symptoms from my bike, not ridden since Thursday! I drove to work on Friday as I was going out straight after to a mates house to watch the Euros and a lads night out, Satruday was hanging pretty bad, Sunday I had 5 a side and was feeling rough still from what I thought was Friday nights antics - turns out I'm ill! Been off work all week and am feeling like poop.

I want to do something!
 
Do you find the gauge moves in 'stages', as in it doesn't move smoothly across the scale and 'ticks' up to the next mark on the scale? Just got one yesterday, it's brilliant in terms of pumping up a tyre quickly, but the fact that it doesn't seem too good for very accurate measurements is slightly frustrating. Thinking i may potentially have a dodgy gauge.
It does stick slightly, but mine isn't as bad as yours sounds. My track pump does the same thing though, where it will move up in steps of 10psi or so until I get to 100, then it'll move more slowly. Perhaps yours is faulty, or needs breaking in?
 
[DOD]Asprilla;22129130 said:
It's sunny everyone! Quick, get out while you can!

Err I've just have been out and got wet again, much better than last Friday bonking in 25mph winds and raining was not much fun.
 
Last edited:
You should go and see Adrian Timmis at Cadence Sport, he's up by you. He'll give you the best fit you'll ever have from what I've read. He's an ex-Pro, competed in the TdF etc. He should be able to tell you what frame geometry and size would suit your body best.

Would he be able to find the right geometry bike for me rather than trying to cobble my bike to fit? i.e. start from scratch and tell me the right geometry?
 
So, I'm currently riding my 17 year old Raleigh Max Ogre mountain bike around... It weighs a ton, the brakes suck, the gearing isn't up to much (lows not low enough, highs not high enough) but I'm having some fun with it. I'm seriously thinking about getting on the C2W scheme in the Autumn when my benefits get renewed, and getting a proper road bike, but for now I'm stuck with the mountain bike for all my cycling, be that on or off the road.

My question... Is it worth getting clipless pedals and putting them on this old thing, or is that just totally ridiculous? At the moment I'm just wearing regular trainers but I'm wondering whether it mightn't be worth getting some second hand SPD shoes and buying some cleats and pedals. If and when I get my proper road bike, I'll transfer the pedals over to that and probably get some new (rather than second hand) shoes for commuting in.

So... Could I see any sort of realistic benefit from fancy pedals?

If nothing else, my neighbour is a keen cyclist and wants me to go out riding with him and his mates and is prepared to lend me his spare Carerra TDF in the meantime, but I'd need fancy shoes for that as he's put clipless pedals on it, so I suppose it'd be worth having at least the shoes for that.
 
Status
Not open for further replies.
Back
Top Bottom