Ryzen 5 3600 w/ Dark Rock Pro 4 temps

Oblivioux

Oblivioux

Oblivioux

Associate
Joined
10 Jun 2020
Posts
18
I built my new rig today:

B450 Tomahawk Max

R5 3600

Dark Rock Pro 4 Cooler

16GB 3200MHz DDR4

GTX 1060 3GB (my RTX 2060s is still on back order)



However while just rebuilding the files, and installing programmes and games the CPU managed to reach 69.5c, and Cinebench R20 pushed it to 74c

also 30 mins on Prime95 saw an average of 71c, with a peak of 82.5c



Now im new to AMD chips, always had intel, and this is my first build myself - but is this normal for this CPU+cooler. Or have I done something wrong?
 
Gray2233 said:
That's pretty high for that cooler and chip.

Is this with everything at stock?

What are your ambient temps?

You could try reseating the HSF, this might sound daft but it happens to someone at least once a week on here, did you remove the protective plastic film on the bottom (aka where it sits against the CPU) of the HSF?
Click to expand...

Yepp everything at stock (other than RAM has XMP enabled if that affects it)

I did remove the plastic, as I just found it stuck to the back of my phone haha
 
Gray2233 said:
Haha. You would be surprised at how often that happens mind, a little while back a guy who had 10 + years experience of building custom water cooling setups did exactly that with the plastic! lol

What sort of case is your rig inside of, and how are your fans setup?

Ambient temps would help too.

A picture would help a lot ontop of knowing your case.
Click to expand...


https://imgur.com/a/a8uVcuA - Just reseated the HSF - took bloody ages to reclip in that middle fan >.<

thats 2 intake fans, 1 exhaust behind.

Not sure what ambient temp is as no household thermometer, would guess between 20-24c
 
Gray2233 said:
I'm guessing that's two front intake and one exhaust? Just reread your post!

What case is it?

Even assuming a case with bad airflow mind you, you should not be getting those temps with that CPU and that HSF.

What are you using to monitor your temps?

..Yeah, the worst part of fitting an HSF is almost always the damn fans, I feel your pain bud.
Click to expand...

Corsair Spec 06

HWInfo - GPUZ and MSI - checked them all

since rebooting after reseating, I have literally turned the PC back on, opened the monitors, and come to this forum. Temps have been as low as 35c and spiked up o 60c while just browsing the web
 
Right, went into Bios, was reporting CPU at 32c, Installed Speedfan but have no clue how to get it to show CPU temps, only wants to show HDD/SSD temps

At this point I feel like im better off putting the wraith cooler in haha
 
Gray2233 said:
That isn't out of bounds for idle and in line with what your bios reports.

How about stressing it a bit now you're on balanced?

You shouldn't be using as much voltage with the Windows Balanced, but to be honest with your HSF and a 3600 if you're pushing over 70C there's something odd.
Click to expand...

40 mins in, highest has been 74c
 
Gray2233 said:
Seems like an improvement at least and potentially right.

Which PRIME test are you running?

For heavy load and a max 74c I think I'd be happy.
Click to expand...

So little update after today, I took the system apart, rewired it all nicely (was nice before but sepnt 2 hours doing it today) tightened them screws done on the HSF, and today while gaming (according to Ryzen Master, as GPU-Z and MSI are still looking crazy) has me at a max of 55c while gaming
 
You must log in or register to reply here.
Back
Top Bottom