I'll let you know in a bit but my Mobo is on the supported but duff list.
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
Ryzen ClockTuner
- Thread starter CuriousTomCat
- Start date
I'll let you know in a bit but my Mobo is on the supported but duff list.
Soldato
- Joined
- 18 May 2010
- Posts
- 12,828
I have a Platinum sample 3600 which is nice but after the Diagnostic if I try to press Start I just get "Max frequency higher than reference frequency"
Soldato
- Joined
- 18 May 2010
- Posts
- 12,828
Ah ok, Homepage is Twitter account and it states its a bug and to wait for Hotfix. Oh well fun while it lasted.
One thing I still dont get is once you do apply it how does it keep the settings!?
One thing I still dont get is once you do apply it how does it keep the settings!?
Soldato
- Joined
- 18 May 2010
- Posts
- 12,828
Gotcha, it just uses the Ryzen Master SDK to apply and save the profiles you dont need to have Ryzen Master open
I'm hit by the bug anyway, not sure what causes it but the Reference frequency is showing as 6525! Nice to know I have a Platinum sample CPU though, will be good to see what happens when its fixed
It also takes me to the Cinebench homepage as if to download it when its already installed, not sure why that is either
Soldato
- Joined
- 18 May 2010
- Posts
- 12,828
Have you completed all the pre checks? Only one I didnt do is install .NET 4.6 and above I cant download it for some reason
Ditto with the direct to download CB20. CB20 is in the folder required.
Yes, all prechecks completed.
So I have just had a very quick play, no extra tweaking.
Gigabyte Aorus Master X570
3900X (crappy silver sample, t'was an early one)
Default cinebench score: 6877 @ 142 watts, all 3901/3901/3901/3901mhz
Clocktuner score: 7550 @ 154 watts, 4325/4325/4250/4250mhz
Previous Cinebench score with PBO etc; 7208
So Cinebench is giving me a 9.7% increase over default and 4.7% increase over PBO results with all limits off
For games
Gears of War 5 default - CPU (game) - 290.7fps, CPU (render) 220.3fps
Gears of War 5 Clocktuner - CPU (game) - 292.2fps, CPU (render) 225.0fps
Ashes default - CPU average all batches 128.9fps
Ashes Clocktuner - CPU average all batches 128.4fps
So a definite significant improvement in cinebench, small couple of percent improvement in gears and tiny regression in Ashes
I did notice that it's running a good 5-8c cooler though which is better than a kick in the teeth.
Gigabyte Aorus Master X570
3900X (crappy silver sample, t'was an early one)
Default cinebench score: 6877 @ 142 watts, all 3901/3901/3901/3901mhz
Clocktuner score: 7550 @ 154 watts, 4325/4325/4250/4250mhz
Previous Cinebench score with PBO etc; 7208
So Cinebench is giving me a 9.7% increase over default and 4.7% increase over PBO results with all limits off
For games
Gears of War 5 default - CPU (game) - 290.7fps, CPU (render) 220.3fps
Gears of War 5 Clocktuner - CPU (game) - 292.2fps, CPU (render) 225.0fps
Ashes default - CPU average all batches 128.9fps
Ashes Clocktuner - CPU average all batches 128.4fps
So a definite significant improvement in cinebench, small couple of percent improvement in gears and tiny regression in Ashes
I did notice that it's running a good 5-8c cooler though which is better than a kick in the teeth.
Looks good that. I still can't get it run, it will complete the benchmark but other than that it reboots the machine as does the sum of jack.
Same here, also using the same motherboard as you. Asrock x570 Taichi. I tried changing LLC to both "2" and "Auto" as well.
The diagnostic will run okay though pretty much, and says my 3900X is a silver sample.
We see same problems, must be Mobo. 3.40 bios?
I'm on 3.20
I have overclocked the RAM before, it's crucial e-die, but for now I just have it running at a standard XMP 3200 CL 16 which is stable.
My machine ran the diagnostics ok, managed cinebench after pressing start but then rebooted itself. Ram is running AXMP 2 (3600 CL16), X570 Tomahawk and Ryzen 3600 with decent cooling. Followed the pre-setup instructions, no other changes to the system, and I set LLC to 3 as per the instuctions for MSI boards.
update - worked ok second try.
I get a message that LLC needs to be lower, however, so not sure whether to go to 4, 2 or back to auto with that
update - worked ok second try.
I get a message that LLC needs to be lower, however, so not sure whether to go to 4, 2 or back to auto with that
Last edited:
Associate
- Joined
- 5 May 2017
- Posts
- 142
My to I am on x370. Asus prime pro and the 3959x. After the diagnosic (gold sample) I hit start button. After 5 minuuts a reboot. Averything on auto and llc on level 3. Any reason why?
Doesnt the Ryzen tuner enable hpet though? I would still manually overclock as hpet on will be a performance and latency loss. Thats why there is no more bios toggle because things like this can override the off toggles somepeople use and thus you no longer use TMC and better timers.
It also causes microstutter but that was Ryzen tools but i suspect clock tuners the same thing. This is why no one listnened to me when i said your getting motherboards now with no toggles and no way to secure against the hpet abomonation.
Had the boards of had the toggle, I would have had peice of mind but you now need to spend time checking to see if they are still doing it.
It also causes microstutter but that was Ryzen tools but i suspect clock tuners the same thing. This is why no one listnened to me when i said your getting motherboards now with no toggles and no way to secure against the hpet abomonation.
Had the boards of had the toggle, I would have had peice of mind but you now need to spend time checking to see if they are still doing it.