****Show Us The inside of your Case!****
- Thread starter Camoe
- Start date
lol that would cost about £500 i would have to swap a Gigabyte OC Force for a
Gigabyte G1.Sniper 5 for a start, then 8 fans and a Heatsink, i will face it to a wall.
Wife's is better
Last edited:
Associate
Cant you turn the LED's off in the driver settings on those cards?
Associate
You most certainly can 
Soldato
Looks brilliant that, apart from that one fan
That noctua was in the side panel but was making too much noise. It's quieter in the front due to the filters. (hexagonal mesh always seems to create more noise) I'll be putting another gentle typhoon 1850 in to replace it when i eventually get around to it.Cheers, it is 7/16" tubing on 1/2" barbs.
Soldato
That braiding <3 going attempt to do my own in black and blue after ive watched the tutorial you made.
That's me done, relocated the HDD into the 5.25" bay, removed 3.5" bay.
Also got some red labels made for the Crucial M4 and Power Supply in red and the right orientation for my build.
i7 4770k @ 4.4ghz
16GB Corsair Dominator Platinum 1866mhz
Gigabye Z87X-OC
Inno3D GeForce GTX 780 iChill HerculeZ X3 Ultra
Asus Xonar DG
1TB WD Black
128GB Crucial M4
Corsair H100i with SP120 Performance edition fans.
Corsair 750D with 1 x AF140 and 1 x AF120 fan.
Also got some red labels made for the Crucial M4 and Power Supply in red and the right orientation for my build.
i7 4770k @ 4.4ghz
16GB Corsair Dominator Platinum 1866mhz
Gigabye Z87X-OC
Inno3D GeForce GTX 780 iChill HerculeZ X3 Ultra
Asus Xonar DG
1TB WD Black
128GB Crucial M4
Corsair H100i with SP120 Performance edition fans.
Corsair 750D with 1 x AF140 and 1 x AF120 fan.
Soldato
Too Tall that looks amazing mate, nice work!
How did you do that crucial SSD I have the exact same one as you and would love it if you could let me know how you did it.
Have you considered filling that extra fan spot on the bottom with another AF120?
How did you do that crucial SSD I have the exact same one as you and would love it if you could let me know how you did it.
Have you considered filling that extra fan spot on the bottom with another AF120?
Cheers mate, I don't think I'm going to put another fan in, my GPU and CPU are both running at temperatures I'm more than happy with.
In regards to the Crucial M4 label, I found the largest res image of it I could on the web, cropped the label and adjusted the colours to get one that was right for me.
It was printed by a company called Diginate. They did it on a matt effect vinyl which looks great in person.
http://i.imgur.com/yJ67VgR.jpg
That is the image after the label was cropped and the label itself for printing is 7.5cm x 5cm.
Soldato
Wicked thanks mate really appreciate that.
Think I'm going to do the same with my PSU and SSD.
Soldato
My new case
Still some work to go with cable tidy etc
Still some work to go with cable tidy etc
Soldato
Yeah already found that I am just in the process of adjusting one of the AX 750 stickers so that it is black and red.
Soldato
Have just done acrylic using EK fittings for 'between blocks' connections.
Needs a dust and a tidy and some more leak testing but so far so good. After it is all sorted, will take picture on something better than a potato.
Needs a dust and a tidy and some more leak testing but so far so good. After it is all sorted, will take picture on something better than a potato.
Soldato
just got this one done, formula will be switched to a black in jan (if theres any stock!!!) and another gpu added
some weird smeary on the door which seems to be impregnated, does not clean.
some weird smeary on the door which seems to be impregnated, does not clean.
Associate
Had a bit of a tidy up. Crappy iPhone pictures unfortunately.
I hope to put those 2 R9 290s under water some time January or Feb, right now the heat is tolerable since it's cold outside anyway.
I hope to put those 2 R9 290s under water some time January or Feb, right now the heat is tolerable since it's cold outside anyway.
Soldato
- Joined
- 29 Sep 2010
- Posts
- 6,152
Associate
As it stands for now, need to find a better solution for the Hdd's in the bottom, i don't like the cages as they're too airflow restrictive.
Also need another backplate for the lower GPU.
Case is 750D