- Joined
- 15 May 2012
- Posts
- 5,945
- Location
- Louth, lincs
When you contact them petey make sure you email and not use the contact form, the forms are for general enquiries and get lost!!
Slooooow order
- Thread starter Nickolp1974
- Start date
Soldato
- Joined
- 22 Jul 2012
- Posts
- 16,222
- Location
- London
The form seemed to work ok this time. I have to say that the correspondence I've had with them with past orders has usually been pretty good. It's just their crap delivery system 
Anyway, here's what they had to say: "The blocks are in stock, and are being brought into our Manchester warehouse for you. Delivery will be made within 3-5 days as advised at checkout"
Seems like a pretty rubbish system if stock has to be transferred around before it gets dispatched to customers... Let's see if they make it here by Friday
Three cheers for free next day delivery from OcUK
Just a shame that the stuff I needed either wasn't in stock or sold here in the first place. Can't have everything I guess.
In the meantime...
Anyway, here's what they had to say: "The blocks are in stock, and are being brought into our Manchester warehouse for you. Delivery will be made within 3-5 days as advised at checkout"
Seems like a pretty rubbish system if stock has to be transferred around before it gets dispatched to customers... Let's see if they make it here by Friday
Three cheers for free next day delivery from OcUK
Just a shame that the stuff I needed either wasn't in stock or sold here in the first place. Can't have everything I guess.In the meantime...
These puppies will have to wait
Last edited:
- Joined
- 15 May 2012
- Posts
- 5,945
- Location
- Louth, lincs
Nice!!I want another gpu!!
spent too much again, so gonna have to wait another month for that 
its this blinking watercooling lark!! Very addictive and can be very expensive... Never mind i don't drink, don't smoke.......... Bugger, forgot, yes i do
Soldato
- Joined
- 22 Jul 2012
- Posts
- 16,222
- Location
- London
Can't be helped. That's where the slots are
There will be a Z77 terminal bridge going on there and it'll look nicer with the blocks on.
Oh, and a nice, beefy MO-RA3 with 180mm fans will be doing it's duty, which I'm sure my fellow rad overkill lovers will appreciate
The sad thing is that it'll only be mining
There will be a Z77 terminal bridge going on there and it'll look nicer with the blocks on.
Oh, and a nice, beefy MO-RA3 with 180mm fans will be doing it's duty, which I'm sure my fellow rad overkill lovers will appreciate
The sad thing is that it'll only be mining
Last edited:
yep, my 1080 is semi-retired atm, had to downsize to an H2 
Word of advise, if using a mahoosive rad (1080/1260) do your self a favour and run a couple of high pressure pumps in series on the loop, will literally save you hours bleeding it.
If you want silence on those 180mm's I can highly recommend the Phobya G-Silent 18 700's, dirt cheap too!
Word of advise, if using a mahoosive rad (1080/1260) do your self a favour and run a couple of high pressure pumps in series on the loop, will literally save you hours bleeding it.
If you want silence on those 180mm's I can highly recommend the Phobya G-Silent 18 700's, dirt cheap too!
Soldato
- Joined
- 22 Jul 2012
- Posts
- 16,222
- Location
- London
Gonna have to make do with a single D5 and see how it goes for now.
Those are the fans I went for actually
Those are the fans I went for actually
- Joined
- 15 May 2012
- Posts
- 5,945
- Location
- Louth, lincs
yep, my 1080 is semi-retired atm, had to downsize to an H2
Word of advise, if using a mahoosive rad (1080/1260) do your self a favour and run a couple of high pressure pumps in series on the loop, will literally save you hours bleeding it.
If you want silence on those 180mm's I can highly recommend the Phobya G-Silent 18 700's, dirt cheap too!
Gonna have to make do with a single D5 and see how it goes for now.
Those are the fans I went for actually
Do those rads have multiple ports?? If not cant you have the ports at the top, stick a T in and a blanking plug to use as a bleed point??
Soldato
- Joined
- 22 Jul 2012
- Posts
- 16,222
- Location
- London
If you use the feet (as I have), then no top port.
Still, I could always use enough tubing to give the slack required to turn it that way whilst bleeding.
Still, I could always use enough tubing to give the slack required to turn it that way whilst bleeding.
The front ports are mirrored on the other side like Acool rads
