Some of my sleeving work

Associate
Joined
30 Nov 2013
Posts
141
Location
Shropshire
Hey dudes, just wanted to share some of my sleeving work, I have literally hundreds of photos of my power supply work, USB and audio cables, so here is just a few!

1441347_667485436606529_1745112209_n.jpg


1147629_607035942651479_2020332471_o.jpg


1403730_656444101043996_1266354549_o.jpg


994637_664941840194222_1920844269_n.jpg


1410874_656443381044068_535648051_o.jpg


I have a load more so if you are interested in anything in particular, give me a shout and I can show you some photos.
 
Those USB ones are cracking really.

I need to get something like this in my PC, instead of the lame normal ones in PSU's.

EDIT : Does this mean OCUK are going to be doing something with Pexon PC's?
 
Last edited:
Nice work :)

Thanks man!

coiled USB looks awesome, but after checking the prices, I think I'll stick to the £1 generic ones.

They aren't the same thing though, I make everything by hand, with quality sourced components, large range of colours, any length and far better build quality.

£50 for a set of custom braided cables, is that steep?

Its cheaper than most other places that offer hand-made, bespoke extension sets. My full sets costs the same as a 24 pin from another supplier.
 
Nice work :) Would be great if you could do sets for the SuperFlower PSU's because we don't have options there as the Corsair's do, this would be a hit combo!
 
But still £22 more than the Bitfenix kits, whats the difference apart from being able to add a couple of different colours?


As I said, they are made by hand, to your requirements.

The Bit-Fenix ones are limited in colours, I can offer different colours, styles materials and so on, they don't offer that. I have access to a countless number of colours, camos and patterns etc.

You want them long, short, rainbow, straight, whatever, I can do that, stuff off the shelf can't.

I make everything, absolutely any cable on my site, by hand, with quality components. I source most of my parts from the UK or US. For example, I don't use cheap quality crimps, only genuine Molex ones, same as my connectors, no corners are cut, with anything. If you are spending 2K on your rig, I don't see an issue in another 10-20 on the finishing touches.

Sorry to go on, I feel I need to justify my pricing.
 
I bought a set of blue corsair ones some time ago, they cost £70.00 iirc. The braid was of a decent enough quality but you could still see the heatsink going into the connector which is a bit unsightly. They were also quite stiff and hard to route.

For a while I liked those Corsair's but heard similar stories. Its not being picky at all because they should have tight thick braid to avoid unsightly wires. I appreciate custom braiding because it takes time and skill to get it right and sets the case off.
 
For a while I liked those Corsair's but heard similar stories. Its not being picky at all because they should have tight thick braid to avoid unsightly wires. I appreciate custom braiding because it takes time and skill to get it right and sets the case off.
Yep, i dont use them at all now. Also owned a few bitfenix ones. But due to their standardised length they can add quite a lot of bulk when hid behind the mobo tray. Found this even in my shinobi xl which has just over an inch behind the tray.
 
Quality difference.


So, does this meant OCUK are doing something with Pexon?

Maybe :p

For a while I liked those Corsair's but heard similar stories. Its not being picky at all because they should have tight thick braid to avoid unsightly wires. I appreciate custom braiding because it takes time and skill to get it right and sets the case off.

The quality of the braid on Corsair replacement kits is not very good, I will be honest. I am not a fan. The braid feels a little tacky, the weave is loose and the colours are drab.

Appreciate the kind words, a LOT of time goes into my work, glad it shows. :D
 
Looks great, as stated above the Bitfenix ones are available for less(personally using the 24pin + 2x 6+2 PCI extensions in white) however wow your work looks good, custom colours is a huge plus and custom length is a MASSIVE bonus.

Keep up the good work, For custom made how-you-want it cables I think your price is about spot on. I would so go for some on a theme build or if I was doing a high budget build :)
 
Back
Top Bottom