Spec me a Gaming PC

Associate
Joined
30 Jun 2013
Posts
93
Location
Gutersloh, Germany
Budget is anywhere up to £1200ish

Must inc GTX 970
i5 or i7, Z97
PSU to support SLI in future.
16GB Ram
Top mounted closed loop rad
Enough fan mounts for 4 SP120 (already own)
inc OS
Case no bigger then 250mm wide, 530mm tall, 500mm long.
HDD already owned, just SSD needed

Thanks
 
Last edited:
Deffo want a 970, just heard its a solid card.

Forgot to mention, i'll be using my HDD from my current PC, so only need SSD.
 
Last edited:
The EVGA is good, black PCB to, not blue like the Galax.

Gigabyte do a good card with the G1 Gaming and the Windforce.
 
is there much difference between the BLACK edition, and the Gaming 7 mobo's??

The current build i have is a home office PC but i use it for gaming, and i've got all my fans connected to my PSU, they are the SP120 quiet edition (3pin), but not quiet. obviously because there running at full RPM, would i be best with a fan controller, or are there enough fan headers on these boards?

Is 750w enough for SLI? and would it be better with the superflower & case offer?
 
The EVGA is a superflower PSU, but a 10 year warranty vs 5.

If the delivery costs £8 and the SF PSU is £10 more then thats a negative gain. If delivery is over £10 then is a positive.
 
is there much difference between the BLACK edition, and the Gaming 7 mobo's??

The current build i have is a home office PC but i use it for gaming, and i've got all my fans connected to my PSU, they are the SP120 quiet edition (3pin), but not quiet. obviously because there running at full RPM, would i be best with a fan controller, or are there enough fan headers on these boards?

Is 750w enough for SLI? and would it be better with the superflower & case offer?

750W is more than enough for 9xx series sli. You could use software to control fan speeds e.g. speedfan (I use this), hwmonitor I think, coretemp etc
http://forums.overclockers.co.uk/showthread.php?t=18584849
 
my fans are 3 pin, aint it 4 pin required for software etc?

Nope not really, I used to use a 3-pin fan, works fine. It just varies the amount of voltage going to the fan instead, not the signal being sent - works similarly. There isn't as fine of a response but you can still control them :)

BTW: This hasn't been tested on Z97 so don't rely on it, I use Z87 and it works but Z97 I'm not 100% on whether it works or not yet
 
Personally speaking, I'd go X99. The DDR4 RAM is down in price and the difference between it and the higher end standard Haswell isn't vast. Seems to make more sense in terms of "future proofing" for games that are becoming more multithreaded. Plus in future builds you can probably make use of that DDR4 where as the DDR3 will be useless.
 
Nope not really, I used to use a 3-pin fan, works fine. It just varies the amount of voltage going to the fan instead, not the signal being sent - works similarly. There isn't as fine of a response but you can still control them :)

BTW: This hasn't been tested on Z97 so don't rely on it, I use Z87 and it works but Z97 I'm not 100% on whether it works or not yet

Would i need a header on the mobo for each fan for this software to work best?

Was watching a vid about the H440, that has the Fan hub on the rear, if that was connected to the mobo would all fans be at the same speed rather then individual?
 
I've a question about my RAM?...

I've Corsair XMS3 (2x4(8GB) of RAM currently, would I see a difference in upgrading??
 
I've a question about my RAM?...

I've Corsair XMS3 (2x4(8GB) of RAM currently, would I see a difference in upgrading??

Nah, only worth getting faster when buying from scratch, or if you are aiming to benchmark and every point counts.
 
Back
Top Bottom