Spec-me

Ok, I'm pretty sure the case is fine. I will just change the wire to see if it works tomorrow and just to make sure do I need to move the fan as it's facing towards the back of the case.
 
Case<- Exhaust Case Fan <------ Heatsink <- CPU Fan

With the arrows being the direction of flow of air, so cpu fan should blow air in to the heatsink and the exhaust fan should then pull the air through and out the case. And if you add a second fan to the heatsink it should pull the air out the heatsink and blow it towards the exhaust fan. The fans have a small arrow on the edge on one side pointing on which way it blows air.
 
I thought it might be, looking for clarity so that's why I'm asking what side it's on cos it should be on the right hand side to blow air into the heatsink, and if it's on the left then its pulling the air just and not as effective.
 
I think you did a good job. Don't worry too much about it and enjoy your kick ass machine.

Ok so all that need changing is the way the position the cpu fan is. I ran prime 95 for a while and it got to 60 degrees is this normal?

Seems a little high for stock. We will know once you try at overclocking, but I would expect just under 70C for 4.2GHz. Maybe a bit higher if your room is warm.
 
signature2.jpg
poker1.jpg
ht88.jpg
baby1.jpg
fitness2.jpg
yeah ,I think so!
 
Back
Top Bottom