Soldato
- Joined
- 29 Dec 2009
- Posts
- 7,353
Having an issue with that I can't determine if it's SSD or Motherboard..
I've installed all the compatible drivers that are listed under SATA on the ASUS Drivers page here
Samsung 840 500GB SSD
ASUS Maximus VII Hero
SSD is connected to SATA 3 (6Gbps)
With all programs closed, using Samsung Magician I'm getting:
540 Read MB/s
90K Read IOPS
150 Write MB/s
25k Write IOPS
Drive Health Status is "Good"
Total Bytes Written: 53TB
The SSD is 2 years old.
Tried doing a long test using SeaTools - passed, no problem.
Here's the weird bit, I put the SSD in an existing server as a second drive, the OS being on the existing HDD. Benchmarked the SSD using SeaTools and got the full expected 330MB/s and 70K IOPS Write.
I've recently reformatted and re-installed Windows on this drive in an attempt to resolve the issue.
It currently has 380GB in Use, 80GB available.
Any ideas or advice before I try the following?
- Test new SSD on this board, install windows and fill up the drive a bit, then benchmark it.
- Run windows in safe mode and benchmark it.
I've installed all the compatible drivers that are listed under SATA on the ASUS Drivers page here
Samsung 840 500GB SSD
ASUS Maximus VII Hero
SSD is connected to SATA 3 (6Gbps)
With all programs closed, using Samsung Magician I'm getting:
540 Read MB/s
90K Read IOPS
150 Write MB/s
25k Write IOPS
Drive Health Status is "Good"
Total Bytes Written: 53TB
The SSD is 2 years old.
Tried doing a long test using SeaTools - passed, no problem.
Here's the weird bit, I put the SSD in an existing server as a second drive, the OS being on the existing HDD. Benchmarked the SSD using SeaTools and got the full expected 330MB/s and 70K IOPS Write.
I've recently reformatted and re-installed Windows on this drive in an attempt to resolve the issue.
It currently has 380GB in Use, 80GB available.
Any ideas or advice before I try the following?
- Test new SSD on this board, install windows and fill up the drive a bit, then benchmark it.
- Run windows in safe mode and benchmark it.
Last edited:

)