Sugo SG03 finally listed on Silverstone's site

TC1 · 30 Jun 2007 at 07:24

With the installation of a Silverstone NT06 all the heat will get sucked through the PSU and out the back. Lots have done this and the temps have been quite low.

m_cozzy · 30 Jun 2007 at 09:44

meansizzler said:
The floppy bracket supports the PSU, so you really neeed to fit that back in, otherwise the PSU is only held by 4 screws, putting stress on the back of the case, which is really weak anyway.

I've just pulled mine apart again to check how secure the psu is without the lower bracket, its fine, barely any movement giving a good hard waggle. Its staying out until I have the requirement for a card reader or something that needs the bracket refitting.

TC1 · 30 Jun 2007 at 10:52

m_cozzy said:
I've just pulled mine apart again to check how secure the psu is without the lower bracket, its fine, barely any movement giving a good hard waggle. Its staying out until I have the requirement for a card reader or something that needs the bracket refitting.

Perfectly ok without it. Great.

TC1 · 30 Jun 2007 at 10:56

The SG03 is only 3.5 inches shorter than my Coolermaster 201 case! It is quite tall really for a desktop case.

m_cozzy · 30 Jun 2007 at 11:04

TC1 said:
The SG03 is only 3.5 inches shorter than my Coolermaster 201 case! It is quite tall really for a desktop case.

3.5" is quite a lot, thats 1/2 a shuttle !

The sg03 has much less depth also so sits back on the desk nicely.

TC1 · 30 Jun 2007 at 11:46

I think i will go for a SG01. Nice and compact. I won't be overclocking and only using on-board graphics.

toppc · 5 Jul 2007 at 10:39

The sg01 is a nice case TC1. I have one but if i had a choice again i would go for the sg03. Bit more room etc. Let us know what you go for.

Massive Attack · 5 Jul 2007 at 16:55

imo they should make the sgo1 anout 1/2 inch higher then make the hdd caddy to take 3hdds which would also allow for a taller cpu cooler

m_cozzy · 5 Jul 2007 at 17:55

toppc said:
The sg01 is a nice case TC1. I have one but if i had a choice again i would go for the sg03. Bit more room etc. Let us know what you go for.

I think he probably would if he wasn't banned

alexakasloth · 6 Jul 2007 at 22:00

Nice looking case i've got to admit, I think it's the type that looks over the top in picture but is really nice to look at in 'person'.

It's good to see the design encorporating 120mm fans as they're becomming more of the standard. Looks like a lot of thought has been put into this case.

toppc · 7 Jul 2007 at 09:52

I am going to get one!!

MoBo · 7 Jul 2007 at 12:41

Whats the temps like when overclockering?

Kanifee · 17 Jul 2007 at 17:10

this case has swayed me away from a pc7 im going to part with the extra cash for sure.
wread a in depth review this morning on this case and thats it i was hooked im gonna get the black one but what i want to know is how long have those aluminum pioneer drives been out and are they hard to get hold of they look sick in the front of these far better than any Lian li stealth cover.

and also what ^^^ said are there temps ok with a big card in there or is a crossflow fan going to be invested in as thats what the holes next to the i/o plate are for