17 May 2007 at 23:29 #61 BEn_2600+ BEn_2600+ Associate OP Joined 9 Jul 2004 Posts 663 Location Rotherham Im at 1.19v and getting 29 idle and 37 load (100% load in TAT) Hope this helps Mish!
17 May 2007 at 23:31 #62 mishima mishima Soldato Joined 10 Dec 2006 Posts 4,715 What overclock are you running there? Seems very similar to mine. Nice one.
17 May 2007 at 23:34 #63 BEn_2600+ BEn_2600+ Associate OP Joined 9 Jul 2004 Posts 663 Location Rotherham It was at stock at 1.19v doubt it would boot at 3.4ghz with that voltage
17 May 2007 at 23:36 #64 mishima mishima Soldato Joined 10 Dec 2006 Posts 4,715 Try pushing the FSB to 333. I'm sitting at that with those voltages and idling @ 30C as I say.
17 May 2007 at 23:36 #65 BEn_2600+ BEn_2600+ Associate OP Joined 9 Jul 2004 Posts 663 Location Rotherham ill give it a go
17 May 2007 at 23:40 #66 BEn_2600+ BEn_2600+ Associate OP Joined 9 Jul 2004 Posts 663 Location Rotherham Im at 333 FSB with 1.19v and TAT says im iding at 28C and load at 39C
17 May 2007 at 23:44 #67 BEn_2600+ BEn_2600+ Associate OP Joined 9 Jul 2004 Posts 663 Location Rotherham Set it back to 486fsb and im at 3.4GHz with 1.2v set in BIOS Seems OK Need to run Orthos tho
17 May 2007 at 23:46 #68 mishima mishima Soldato Joined 10 Dec 2006 Posts 4,715 Nice one, sounds alright to me. I wonder how it will stand with Orthos running a blend. Give it a bash.
Nice one, sounds alright to me. I wonder how it will stand with Orthos running a blend. Give it a bash.
17 May 2007 at 23:54 #69 BEn_2600+ BEn_2600+ Associate OP Joined 9 Jul 2004 Posts 663 Location Rotherham Failed within a few seconds 3.4GHz is stable with 1.375v ive dropped this to 1.3375 ill see if its still stable
Failed within a few seconds 3.4GHz is stable with 1.375v ive dropped this to 1.3375 ill see if its still stable
18 May 2007 at 00:03 #70 BEn_2600+ BEn_2600+ Associate OP Joined 9 Jul 2004 Posts 663 Location Rotherham 8mins into orthos 3.4ghz @ 1.3375v
18 May 2007 at 00:06 #71 mishima mishima Soldato Joined 10 Dec 2006 Posts 4,715 Cool stuff, as long as those temps keep down you should be fine.
Hope this helps Mish!
3.4GHz is stable with 1.375v ive dropped this to 1.3375 ill see if its still stable