Associate
Im guessing you get to keep the items? Lucky guy
The Utterly Imbalanced CaseLabs TX10-D build(s)!
- Thread starter vsg28
- Start date
Im guessing you get to keep the items? Lucky guy
Associate
Associate
So how does one go about getting sponsored initially? Knock out a few decent builds with logs and just start contacting companies?
Ok, so this is mostly an unboxing of some parts. Here's what a 140 x 38mm "Yate Loon" fan looks like:
The quotes in there because these aren't the same version that Petra sold, or even those bought directly from Yate Loon. They run a little slower (1250 rpm max) but at $1.40 each I am not complaining. This is how it looks next to a Swiftech MCX12-XP and Phobya G-Changer 120mm radiator:
These fans are monsters, having a molex input (w/passthrough) for power. The Aquaero 6 could easily power 1 of these, but I haven't tried to see if all 9 I have can run off a single channel with needing the molex input. They move a decent amount of air- nothing close to a Corsair SP120 HPE or NB-eloop B12-4 at full speed. Noise wise, they are about the same as a SP120 QE and slightly louder than an NB-eloop B12-2.
I then opened up the BitFenix care package. They included 2 of their aluminum case badges too:
Nope, these aren't free and nor do they come with their products like the PSUs. Not sure about the cases though! Next up, the Alchemy LED strips:
They sent me 4 x 60mm strips of white LEDs.
Let's see them lit up:
That doesn't really help much. What about a black background?
Ok, that's better. Let's turn off the softboxes and see how these illuminate the interior. I have 2 strips hooked up here:
Not too shabby. With all 4 strips, I bet it is enough for a single TX10 motherboard compartment
I have more lighting samples coming in and will do a small comparison before deciding on what to go with. Next up, the Fury 750G:
At this point, I saw the accessory box in there and figured that was a nice touch to help store unused cables. After all, this was a semi-modular design PSU with only the 24 pin cable attached. But then:
So much for that! The modular cables are bundled in 2 sets and is accompanied by a 14 AWG power cord:
They also give 5 screws in case you lose one for whatever reason. I wish these were black but not a deal breaker.
Here's the PSU itself now:
So you either go fan down and get the BitFenix logo on top + side lettering, or go fan up and get the spec sheet in typical cases. Another thing to complicate that decision is the fact that the motherboard cable is all the way to one side. So depending on how the PSU is placed, the cable may not be long enough.
A look at the internals is best seen from the review over at TechPowerUp, I won't be opening this up. But I did get a PSU tester so I will review performance later.
Finally, a little something red from Gunslinger:
Ok enough of the teasers. It is the hard to find EVBot from EVGA:
This will be pretty useful when benching, especially if/when I do go subzero.
The quotes in there because these aren't the same version that Petra sold, or even those bought directly from Yate Loon. They run a little slower (1250 rpm max) but at $1.40 each I am not complaining. This is how it looks next to a Swiftech MCX12-XP and Phobya G-Changer 120mm radiator:
These fans are monsters, having a molex input (w/passthrough) for power. The Aquaero 6 could easily power 1 of these, but I haven't tried to see if all 9 I have can run off a single channel with needing the molex input. They move a decent amount of air- nothing close to a Corsair SP120 HPE or NB-eloop B12-4 at full speed. Noise wise, they are about the same as a SP120 QE and slightly louder than an NB-eloop B12-2.
I then opened up the BitFenix care package. They included 2 of their aluminum case badges too:
Nope, these aren't free and nor do they come with their products like the PSUs. Not sure about the cases though! Next up, the Alchemy LED strips:
They sent me 4 x 60mm strips of white LEDs.
Let's see them lit up:
That doesn't really help much. What about a black background?
Ok, that's better. Let's turn off the softboxes and see how these illuminate the interior. I have 2 strips hooked up here:
Not too shabby. With all 4 strips, I bet it is enough for a single TX10 motherboard compartment
I have more lighting samples coming in and will do a small comparison before deciding on what to go with. Next up, the Fury 750G:
At this point, I saw the accessory box in there and figured that was a nice touch to help store unused cables. After all, this was a semi-modular design PSU with only the 24 pin cable attached. But then:
So much for that! The modular cables are bundled in 2 sets and is accompanied by a 14 AWG power cord:
They also give 5 screws in case you lose one for whatever reason. I wish these were black but not a deal breaker.
Here's the PSU itself now:
So you either go fan down and get the BitFenix logo on top + side lettering, or go fan up and get the spec sheet in typical cases. Another thing to complicate that decision is the fact that the motherboard cable is all the way to one side. So depending on how the PSU is placed, the cable may not be long enough.
A look at the internals is best seen from the review over at TechPowerUp, I won't be opening this up. But I did get a PSU tester so I will review performance later.
Finally, a little something red from Gunslinger:
Ok enough of the teasers. It is the hard to find EVBot from EVGA:
This will be pretty useful when benching, especially if/when I do go subzero.
Associate
lucky b........!! your build is going to look insane.
I've been trying to convince myself not to upgrade until next year but I don't think I'm going to be able to resist
I've been trying to convince myself not to upgrade until next year but I don't think I'm going to be able to resist
Associate
Speaking of the Frozen-Q reservoirs, I may have done too good a job publicizing them. The limited edition NovaCore Extreme is almost sold out already. I don't know if I should ask them to save a couple for me at the risk of going with the LF Reaction instead- that wouldn't be fair to them.
Last edited:
Associate
great contrast in color looks spot on
Thanks everyone, much appreciated. Ya Mundi is pretty awesome, his package has been stuck at US customs for a while now though lol.
Extremely small update/teaser because I can't say much more thanks to an NDA:
All I can say is something pretty awesome in the custom watercooling world is coming in a few weeks.
Extremely small update/teaser because I can't say much more thanks to an NDA:
All I can say is something pretty awesome in the custom watercooling world is coming in a few weeks.
I finally am done with 1 NDA only to have another pop up real soon. That "package" I was teasing was the new EK Supremacy Evo:
I made a review of it here for anyone interested: http://forums.overclockers.co.uk/showthread.php?t=18620334
I was hoping my order from EK had the small LEDs in it but nope. I wanted to show the Plexi top with the locations for 2 LEDs in it. I now have a bunch of 10/12mm acrylic tubing thanks to IceModz as well as some more stuff that will be shown soon. I also got a few EK and Bitspower 10/12mm fittings for these along with a sample piece of the Alphacool chrome tubing and fittings- they are surprisingly good. I will show them really soon once the Corsair 380T NDA is up.
I made a review of it here for anyone interested: http://forums.overclockers.co.uk/showthread.php?t=18620334
I was hoping my order from EK had the small LEDs in it but nope. I wanted to show the Plexi top with the locations for 2 LEDs in it. I now have a bunch of 10/12mm acrylic tubing thanks to IceModz as well as some more stuff that will be shown soon. I also got a few EK and Bitspower 10/12mm fittings for these along with a sample piece of the Alphacool chrome tubing and fittings- they are surprisingly good. I will show them really soon once the Corsair 380T NDA is up.
Last edited:
Associate
that block looks awesome! and of course it was announced the day after I bought my block...
