• Notice regarding image hosts and attachments. See here.

***The Vapers Lounge*** 2.0

Status
Not open for further replies.
Yeah, a lot of people say don't buy more than 10ml of a juice that you haven't tried before. Even if it's called the same thing or have the same flavours and mix, different manufactures taste different.

Some manufactures home brewe juices taste different from batch to batch (they may start to what they do with wine soon :D). A lot of the homebrewe stuff needs time to mature and breathe (steeping) and will taste different.

Mass factory stuff don't tend to have the issue not because it's made better, but its made in masses and by the time you got hold of yours it's has steep'd but some people do tend to open the bottle and let it air before vaping.

In general I just shake the bottle (always) before opening, fill my tank/or drip and leave the lid off it. If it taste bad, I leave the lid off it for longer, if its ok I put the lid back on when I get home from work and give it another shake.

EDIT: sorry dudes, I work in a medical research company, sat in a computer room next to some extremly expensive severs.. no vaping at my desk :( lol
 
Last edited:
I'm dubious about this staged heating although I'm a noob vaper I am a sparky :D.

Surely within such a small surface area only the hottest coil will affect the vaporisation. Within a short space of time the hotter coil will transfer heat to the colder coil making them relativly the same temperature.
 
Hmm the staged heating coil from my experience, it is a cooler vape than just a regular coil, but it does build up then build up then build up warmer and more plumes. Its not just a instant boomph warm cloud mouth full.

Iv gone back to a regular coil because I like warm vape

Edit: just tested it again as its still built in my mxv2, Its pretty good actually.
 
Last edited:
I most say the ramp up and temp control dna is rather good.
much better the power being dumped asap as in other chips.
 
its different, I'm getting used to vaping differently. but I notice how much vape, flavour and temperture it gives when I try to vape something else, sometime its like I'm not vaping. Kinda like smoking a cig now after vaping for so long.

Get yourself down to a vape shop and ask to try one. Or buy one and send it back; you my find it hard to get your cash back thou. lol

EDIT: oh I'm quite a lazy vaper, I kinda press the button and hardly suck and let the vape come in, this affects the temperture quite a bit and the temp control kicks in more than it should. I've be sucking harder, reducing the airflow and the temp control seems to work fine now.
 
Last edited:
In my experience, if you don't want a dry or burnt hit, using rayon, and depending on the atty, I set temp limit to between 380f and 400f, below 370f its not worth the effort pressing the fire button as temp limit will drop your watts so fast you wont get anything, even at 400f, the vapour is not as good as a typical tank, nevermind RDA, and it is a much cooler vap, and I like cool vaps, but this is cooler still, you can naturally set your temp limit higher, but I have found you can get a dry/burnt hit from rayon around 410f and above if you do...

To sum up, overpriced dna40 mods.
Ni200 is a nightmare to work with.
To actually use the temp limit to prevent dry hits means reducing the vapour and flavour below what you may be used to.

In saying that though, when you get the right build in the right RDA, It can give a great vap with no fear of dry hits.

Currently have a single .25ohm space coil on a Hobo running at 20w on a VF 2.1 and its great.
If you are going to go this route, the VF 2.1 with its dual batteries is a god send as the battery drain on a .2ohm coil or lower (typical in ni200) on a single 18650 is bad.
My first attempt was a dual coil at .06ohm, my 2500mah battery was dead in less than 30 minutes vaping.
 
Temp control is too new but I expect it to be the next big thing really. It might not be for us that build our own coils really. The reason I think it is going to be important is you can be 100% sure you aren't breaking the VG and PG down into anything nasty if the liquid (and coil) never reaches the temp needed to do this. I'm fairly sure we only do this on dry hits anyway and nobody is vaping away on dry hits for ages, so the risk is low but if they get the system right I can see people using it just to feel a bit more sure. All the studies I've read that find anything nasty in large amounts are poorly done, as they have 'puff machines' taking dry hits that just isn't the same as real world vapers use Ecigs.
 
I'm using the factory kanger heads for the aero tanks at the moment, they told me the max temp is 450f so that's what I've set it too.. lol

its gives a nce warm vape. I should be getting so ni200 any day now from sleath vapes; just need the time and effort to rebuild something. :)
 
There are plenty of "big airflow" RBA's on the market, Lemo \ Billow \ Orchid etc but this is the one i have been waiting for and the wait was worth it!

Behold the Goblin! This has so much flavour and can hang with drippers when it comes to cloud production. Only downside is that it eats through the juice!

Jr7uGGVl.webp
 
That goblin looks interesting. Is the RBA inner similar to the subtank RBA inner.

In other news just put a nice order in for Kanthal A1 wire. Got some 0.6 (22awg), 0.45 (25awg), and 0.35 (27awg) heading my way. Should have it by the end of the week I hope.

Loving the smaug mod as well. Rocking it at 0.6 ohms and it's vapeable all the way to 90W's. Anything more than that it begins to feel like sucking on a flamethrower.
 
That goblin rba looks pretty good actually nice work! The video reviews of it look pretty damn good, probibly the most air flow iv seen on a tank yet.
 
From the reviews I've seen, it's very similar to the Lemo drop apart from the airflow control, which I find a pain in the backside.

Is that a SVB with an SX350? Very nice :) I've been thinking of getting a SX350 mod, but I really want my next mod to be dual 18650 for battery life so around 60w would be nice. I really need to have a play/borrow one to see how well I get along with the gravity sensors, I wish they put an option to disable it and run everything via buttons.

I've burnt my mouth the other day drinking soup :( so I'm rocking it old school with a Itaste v3 and evod today lol.
 
Status
Not open for further replies.
Back
Top Bottom