unstable overclock, bit of help please

bullzeye · 26 Jan 2013 at 00:04

tried your settings, with 0.005, bsod on boot up

would you suggest turning offset to 0.010?

wazza300 · 26 Jan 2013 at 00:07

Yh just keep raising one click more,don't go above +0.025v though,you should need around +0.010v to +0.015v

bullzeye · 26 Jan 2013 at 00:21

wazza300 said:
Yh just keep raising one click more,don't go above +0.025v though,you should need around +0.010v to +0.015v

well i tried 0.05, bsod, so tried 0.010 and the voltage was 1.0 idle then 1.40 under load

wazza300 · 26 Jan 2013 at 00:26

What level loadline calibration? I think I missed that off my settings but pretty sure I used high,try one level lower llc

bullzeye · 26 Jan 2013 at 00:33

tried llc on high, voltage is now 1.336v under load , temps are hitting 60 degrees though

wazza300 · 26 Jan 2013 at 00:40

60c is fine for 4.5ghz,you might be able to use one click less offset Idk? But voltage is ok for the clockspeed

Anything below 75c is fine for sandybridge