• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

upgrading processor help/advise needed

It does work well with Mediaespresso 6.5 though (and very well looking at this test against some high-end GPUs), so if you do use a graphics card in your system anyway then Z68 is a good option (since you don't need to pull out your graphics card every time you want to utlise the power of quick sync).
 
Last edited:
Then you should have stated you were using V2.0. You noted what version of Mediaespresso you are going to use, and so I simply assumed you would be using the first release.

:rolleyes:
 
Jordan97 said:
Then you should have stated you were using V2.0. You noted what version of Mediaespresso you are going to use, and so I simply assumed you would be using the first release.

:rolleyes:
Click to expand...

To what logic would it serve that I would use an older version? Usually if someone states they're using software, it's best to assume it's the latest version.
 
ok back to my ram ....

hi all
i received today my new ram
http://www.overclockers.co.uk/showproduct.php?prodid=MY-060-GS

i got 2 of these kits (so 4 x 4gb) and i have a asrock fatal1ty m/b

however using 3 sticks works fine recoginse 12gb and boots etc.

however when putting the 4th stick in the pc wont boot etc ive tried swapping the chips and using different slots (so i know all chips are ok and all slots are ok) why is my pc having an issue with the 4th stick of ram ??
 
hi well i changed the settings in bios made no difference... :(
what i have noticed tho is that the gskill ram chip does not detect in slot one. tried different chips all the same but they all recognise in slots 2,3 & 4. (when i had chips in 1,2,3 it just detected single channel mode (and didnt see the chip in slot 1)
now the ram i use to have in was 6gb (3 x2gb chips) of patriot ddr3 1600 pvt36g1600elk ( ithink it was tri) anyway putting that into slot 1 with the gskill in 2,3,4, it detected it (so i had 14gb in total 2gb,4gb,4gb,4gb)
so that eliminates a fault with the slot and a fault with a particular chip so what on earth is wrong with it ??? accarding to asrock website/ mb manual this exact module of gskill ram is supported (upto 4 chips) so im at a loss
 
That is exceptionally strange behaviour :(

Wonder if it's worth just a couple of notches up on the RAM voltage? Failing that I'm inclined to suspect the motherboard, since it appears to recognise 2gb in slot 1, but not 4gb... :/
 
You must log in or register to reply here.
Back
Top Bottom