• Notice regarding image hosts and attachments. See here.

  • Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Using a PCI-E Connector

Soldato
Joined
12 Dec 2005
Posts
14,625
The graphics card I'm getting needs 2 X PCI-e connectors. My XFX 450W only has the one so I've got to add a 4-pin molex connector.

I've read around and people saying to have the connector on a 'dedicated' 4 pin molex, I'm not fully sure what this means.

On my PSU I have 1 cable that has 4 seperate molex connections, do people mean just connect the PCI-e adapter and nothing else to the molex or do they mean just make sure the PCI-e connector is running off a single molex and not crossed with a bunch of fans etc?

Cheers
 
Just getting ready to install the 5850 now and took another look on the PSU, I can indeed only see the one PCI-e adapter, it has a further 2 pin attached to it.

I also looked on the PSU box and it says '(1) PCI-E 6/8-pin'.

So I will have to use one of the PCI-E Adaptors that came with the 5850 - Would I be OK just adding it to a spare 4 pin molex coming from my PSU or as I said initially does it have to be on a line that has nothing else connected to any of the other molex's?

It's strange that the one you linked is exactly the same but the specs are a bit different? :S

Cheers
 
Last edited:
Cheers guys - On the one line of molexs I've got this:

3-4 fans connected together using just 1 molex and the other 2 molex are spare, so I just attached the PCI-E Adapter to one of the spare ones.

So this won't affect performance or anything?

Cheers
 
Hi guys,

I ran 3dmark11

m7g03.webp


Said my score is low compared to others, is it because most of the others seem to be overclocked?

Cheers
 
I think it is because of my card running at stock as I took a look and compared others and every one was overclocked... I do hope the pcie adapter I'm using wont affect performance any?

So, I believe the max overclock for a non-reference 5850 is 775/1125. Would I be safe going straight up to that overclock and then using something to stress test?

Thanks
 
I Overclocked to 775/1125, and got a better score in 3dmark.

Didn't mess with any fan settings in afterburner, running furmark burn in test now, and been going for five minutes, temp is at 90c fully loaded. Is this to hot?

Think it's getting so hot because my fan speed is on auto, what should I have it on guys? Running at 100% always?
 
Last edited:
It is a bit hot, I would try and keep it under 80 degrees.

Having the fan on 100% will keep it cooler, but it will likely drive you mad with the noise.

Instead, you can setup a custom fan profile within afterburner which changes the fan speed with different temperature levels. Just click on "settings" on the main Afterburner page, then select the "Fan" tab, then tick the box to allow user defined fan profiles. From there you can make your fan profile graph however you like.

Thanks - I'm having some bizare issues with the card.

I set the fan to run at 80% always while I tested out FurMark. No difference, it got straight up to 90c. As soon as the temp hits 90c, the GPU seems to throttle as quite a lot of performance is lost in FurMark after 90C.

I reset the overclock to stock settings and ran FurMark again. The GPU hit as high as 90c and seemed to throttle again.

I'm not sure what's going on, I have decent cooling in my case.

Any ideas?
 
Thanks - I ran furmark again with an overclock. The GPU is certainly throttling after 90c in furmark as I saw it in GPU-z. I can also hear the fan throttle really badly, it sounds like someone revving a car.

Really not sure what's going on, I don't think it's anything to do with the overclock as I have the exact same results and temp without it.

Cheers

EDIT - I tried MSI Kombuster aswell and that gets to 90c really fast without an overclock and just throttles.
 
Last edited:
I have 2 X 120MM Fans on the side of my case that are situated over the GPU. I believe they are pulling air out of the case.

The 5850 was bought from the MM, the heatsink is a bit dust but I don't want to mess with anything like that just yet. Maybe it could do with having some new thermal paste applied aswell?

Just concerned if their may be anything wrong with the card, I know furmark is very demanding but should it really be heating a card up that fast?

Also I notice the back of the GFX Card has a strange white substance on some parts of it, not sure if that is anything significant?

Cheers
 
Well I have a Zalman Z7 Case. I have never touched the front or the back fan. However I no longer have the side part that the Z7 has. I asume the front fan on the Z7 is intake and the back is exhaust.

The 2 120MM Fans that I have on the side I have just turned around so they are now blowing air at the GPU, however it hasn't made a slight bit of difference. Straight up to 90C in FurMark.

Any more suggestions? I'm a bit worried about using the card for gaming now incase the temps ever go over 90... Temp is currently at 39c idle.

Thanks
 
Last edited:
If you are worried about temperatures in gaming I would suggest setting up MSI aferburner (or GPU-Z) so that it monitors the GPU temperature while running in the background. With MSI afterburner I think you need to go to "settings", "monitoring" tab and enable "log history to file".

Then load up a graphics-intensive game and play it for a couple of minutes and see what the GPU temperature reading said during this small test. I'm pretty sure you will find that the load temperatures are significantly lower than those in furmark/kombuster.

I shall give that a go, thanks. :)

The 5850 I have is the one with the egg cooler, I don't think they are known to cool as well. Maybe I should look for another gpu cooler?
 
I'll get a log file done now playing some Tribes Ascend. I'll play for about 20 mins and post the results back here. :)

Cheers
 
Ok guys - Just done a quick session and it stayed flat at 87c. To me that still seems much higher than it should be tbh... Only 3c away from a throttle. :S
 
Thanks, I'll contact the seller. He seems like a nice enough fella although I have sent him a few emails already.

I really don't want to mess with the thermal or heatsink yet, hopefully the seller will be cooperative. :)
 
Are you sure the overclock has been disabled?

I've had it in my machine for over a year, in crossfire so sitting next to another card pumping out heat, and I maxed out at 74ºC in games.

I'm aware that my case has got considerably better airflow, but what is the ambient temp in your case, and the cpu?

The overclock is definitely disabled mate. I don't know what will monitor my ambient case temp but my i5 2500 generally goes anywhere between 29c and 35c when idle.

Cheers
 
Tried with the side of my case off earlier. Absolutely no difference. I didn't leave Tribes running for as long as I did the 2nd time around though.

Also any idea of what the white stuff is on the back of the GFX Card I linked pictures of on the last page?

Cheers
 
I assumed it was just a bit of dust, and didn't want to try and wipe it for fear of staticing the card in to an early grave. I did want to give it a compressed air blast, but don't have any :(

Really doesn't look like dust tbh, it's spread over the back of the card a fair bit.

I've messed about with the fan profiles in afterburner to no luck, as said though even running the GPU at 100% fan speed seems to have zero effect on the temps which is really strange.

Here's a pic of the inside of my case, excuse crappy camera quality. I don't have the best cable management but I don't think it'd cause any issues either.

qdjs1l.webp


Cheers

Using latest 12.4 Drivers.
 
Back
Top Bottom