Using corsair modular cables on OCZ

Tackle_Berry · 10 Apr 2013 at 19:04

Hi,

So I have to RMA a corsair HX850 power supply. I was hoping to just use the existing modular cables with a spare OCZ power supply. But it doesn't seem to work? The motherboard and CPU cable are fixed to the power supply then I have 4x 6pin modular connectors plugged in. The motherboard turns on but no fans or anything else works.

RJC · 10 Apr 2013 at 19:06

What are your system specs?

Where you overcloked at all, I assume any external GPU'S are powered. My only concern is the Corsair may be wired slightly different to the OCZ.

One thing you could try doing a CMOS reset.

Tackle_Berry · 10 Apr 2013 at 19:18

Yeah it's overclocked and got the GPU plugged in too, I posted up checking that this PSU would be safe to use and my spec here:

http://forums.overclockers.co.uk/showthread.php?t=18504068

BuToNz · 10 Apr 2013 at 19:21

The pin-out will 100% be different - DON'T mix and match the cables.

RJC · 10 Apr 2013 at 19:33

The OCZ will be safe to use but with its own cables, BuToNz has confirmed my issues with using other manufacturers modular cables.

setter · 10 Apr 2013 at 19:37

Yep, my hx 850 modular cables are keyed quite differently from my antec true power modular units ones.

Tackle_Berry · 10 Apr 2013 at 19:38

Ok thanks, hopefully no damage was done trying them. Will have to try finding the OCZ ones.

BuToNz · 10 Apr 2013 at 19:49

Ash2097 said:
Ok thanks, hopefully no damage was done trying them. Will have to try finding the OCZ ones.

Assuming you've just used the GPU connectors, you could have sent +12v down a ground and done serious damage.

Only +12v and ground pins go to the GPU's.