Valkyrie - To the skies! *Sponsored*

Your stuff as always
Looks absolutely amazing mate

Any chance you could add temperatures
Maybe even noise levels
To the specifications post?
Looking greats half the picture but still has to be
Functional and at acceptable temps and noise
 
Glad you're feeling better!
The red accent (not sure accent is the right word as it's pretty prevailent!) really sets the build off, but.... was there much point in the coloured coolant when the tubes are sleeved? IS there anywhere you can actually see it?
Stunning build as always though :)
 
Mcnumpty2323 said:
Your stuff as always
Looks absolutely amazing mate

Any chance you could add temperatures
Maybe even noise levels
To the specifications post?
Looking greats half the picture but still has to be
Functional and at acceptable temps and noise
Click to expand...

Absolutely! A few hour sessions on Kingdom Come Deliverance 2 today and my temps are:

CPU: 68c
GPU 43c

CPU is clocked and undervolted with
Scalar: 10x
+200 mhz offset to 5.4ghz
Curve optimiser: -15

GPU is undervolted to 0.96v at 2800mhz with a +1200 on the memory.

Noise levels i can't measure but with both pumps running at 25% its less than audible... infact the only thing that's audible which i've also turned right down now is the nvme heatsink fan!


TrojanWhore said:
Glad you're feeling better!
The red accent (not sure accent is the right word as it's pretty prevailent!) really sets the build off, but.... was there much point in the coloured coolant when the tubes are sleeved? IS there anywhere you can actually see it?
Stunning build as always though :)
Click to expand...

Thanks dude!

It's definitely abit more out there in terms of colour, i really wanted something that stood out more so went pretty wild with the 2 toning black and white and coloured sleeving. It was mainly for the reservoir area though in hindsight i could have built the shroud to include a LED strip but with me being ill, i shelved it.
 
Last edited:
Final system specs:

  • AMD 9800X3D
  • Gigabyte X870i Aorus Pro Ice Motherboard
  • RTX 4090 Founders Edition - Modultra Waterboy GPU Block Beta
  • Corsair SF10000w PSU
  • G Skill Ripjaws Neo M5 2x32gb CL26
  • Kingston Fury Gen4 2TB Drive x2
  • Bitspower Watercooling
  • Modultra LOBO CPU Waterblock
  • Modultra WOBO Beta RTX 4090 FE Waterblock
  • Phanteks Glacier R160C DDC Combo
  • EK Quantum Surface Radiators S240 and S120
  • Thermal Grizzly Kryonaut
  • Thermal Grizzly Wireview
  • Thermal Grizzly Minus Pad Pro (For GPU Block)
  • MDPC-X Big and small sleeve Lava Orange
  • Phanteks D30 Fans
 
Mcnumpty2323 said:
Thanks for the temperatures mate
Will push my luck now
Did you measure coolant temperature?
Click to expand...

Not plumbed in unfortunately but i have a few spare ports in the rear that i will repurpose for this at some point. I would say it's well within normality though especially with the number of rads cooling it.
 
Jay85 said:
Not plumbed in unfortunately but i have a few spare ports in the rear that i will repurpose for this at some point. I would say it's well within normality though especially with the number of rads cooling it.
Click to expand...
Yeah am sure it's fine
Just my curiosity is all
 
Jay85 said:
Final system specs:

  • AMD 9800X3D
  • Gigabyte X870i Aorus Pro Ice Motherboard
  • RTX 4090 Founders Edition - Modultra Waterboy GPU Block Beta
  • Corsair SF10000w PSU
  • G Skill Ripjaws Neo M5 2x32gb CL26
  • Kingston Fury Gen4 2TB Drive x2
  • Bitspower Watercooling
  • Modultra LOBO CPU Waterblock
  • Modultra WOBO Beta RTX 4090 FE Waterblock
  • Phanteks Glacier R160C DDC Combo
  • EK Quantum Surface Radiators S240 and S120
  • Thermal Grizzly Kryonaut
  • Thermal Grizzly Wireview
  • Thermal Grizzly Minus Pad Pro (For GPU Block)
  • MDPC-X Big and small sleeve Lava Orange
  • Phanteks D30 Fans
Click to expand...
That's quite a beast! :eek:
 
You must log in or register to reply here.
Back
Top Bottom