**WANT 8GB 2400MHz FOR AS LITTLE AS £59.99 Inc. VAT? - THEN CHECK THIS THREAD OUT!!** (MV-3V4G3D/US)

jmillzee said:
Im not to good with Memory, but I need some new stuff, would these be good along side my i7 930 @ 3.8, GTX570, Asus P6X58d-E for gaming.

I currently have some old OCZ Gold 6gb Tri-Channel 2000Mhz - but Im running into some problems.
Click to expand...

i believe u would need 1.6-1.65v memory as your i7 is pre-sandybridge which runs at lower volts. i am probably running at the edge of my sandybridge system running my memory with max 1.65v on the sticks.

i am not sure whether this lower voltage memory will run in the older i7 setups, can anyone confirm?
 
BUZZIN_NICE said:
i believe u would need 1.6-1.65v memory as your i7 is pre-sandybridge which runs at lower volts. i am probably running at the edge of my sandybridge system running my memory with max 1.65v on the sticks.

i am not sure whether this lower voltage memory will run in the older i7 setups, can anyone confirm?
Click to expand...

Yes you can always run memory at lower voltage, the system if anything will benefit from it. :)

You don't have to use 1.65v ;)
 
Gibbo said:
Yes you can always run memory at lower voltage, the system if anything will benefit from it. :)

You don't have to use 1.65v ;)
Click to expand...

thing is this mate, cant remember now but i am running 1866mhz or thereabouts as 2000mhz not supported on sandybridge or my board. i wanted to try and push it to 2100mhz which is my next option iirc but last time i tried i couldnt hit this at 1.65v on my sandybridge setup.

therefore i was gonna replace them and try and push for 2100mhz on the samsungs whilst running lower voltage mate.

also gibbo can you confirm please mate whether i qualify for free delivery yet?

cheers,

dean
 
More than I was planning on spending on a memory upgrade for my old 720BE rig, but tempting to invest in for the inevitable IvyBridge rebuild... Hmmm
 
Sin_Chase said:
I don't even need these and I want to buy them! :D

WHAT!
Click to expand...

+1

If I hadn't just filled all my DIMM sockets (with "measly" 1600MHz/C9 Vengeance) these would be seriously tempting. Although various tests show only minimal/moderate improvements with DRAM faster than 1600/1866MHz on SandyBridge, this price/performance would be difficult to resist.

Is power use really an issue with memory? OK 65% power saving is great, but 65% of what? A few watts maybe? I can't seem to find any figures for power draw, so I'm guessing, but it can't be that much can it? Still, could be important for a HTPC/SFF build.
 
DennisMenace said:
+1

If I hadn't just filled all my DIMM sockets (with "measly" 1600MHz/C9 Vengeance) these would be seriously tempting. Although various tests show only minimal/moderate improvements with DRAM faster than 1600/1866MHz on SandyBridge, this price/performance would be difficult to resist.

Is power use really an issue with memory? OK 65% power saving is great, but 65% of what? A few watts maybe? I can't seem to find any figures for power draw, so I'm guessing, but it can't be that much can it? Still, could be important for a HTPC/SFF build.
Click to expand...

These do 1.65W Power Consumption at stock.So yeh, ram power consumption is not much, marketing!
 
DennisMenace said:
Judging from the oc3d review vs Gibbo's, I can only assume oc3d were sent a duff set for testing.

Either that, or Gibbo was sent a better crate of whiskey. :rolleyes:
Click to expand...

I was not reviewing the product though. ;)

We took 500 units on the off chance they could be as rumoured great clockers.

If they did not clock, no loss to us, we just use them in our SI business for building machines, Samsung memory is afterall very good!

If they turn out good, we simply list them online and sell them to the masses. :)

I took 2 kits from stock, put the 4 modules in my X79 test rig, fired it up and in my testing they did stable:-

1600MHz @ 8-8-8-24-1T with 1.45v
2133MHz @ 10-10-10-1T with 1.50v
2400MHz @ 11-11-11-2T with 1.525v

The 2400MHz I even did a 32M PI run and posted the screenshot above, if out of 500 kits arrived I happen to pick the only two which can overclock I'd be rather simply amazed.

We've sold a lot today, I am sure there will be some feedback in time on how well or not those customers have managed to clock them. :)
 
kmetek said:
are these i suggested?
Click to expand...

Yes they are. :)

In order to show our thanks just to yourself we'd be willing to sell upto 2 kits to just yourself at £39.99 Inc. VAT.

Drop me an email from your registered forum email account with your phone number and I shall get a member of sales to give you a call to take the order.

My email is [email protected]
 
WOW :) Would you ship to Slovenija and have mastercard/paypal option? :))

Will send you email :) You don't need to call me, I live in Slovenija hehe, call would be too expensive, over email will be just fine? :)
 
kmetek said:
WOW :) Would you ship to Slovenija and have mastercard/paypal option? :))

Will send you email :) You don't need to call me, I live in Slovenija hehe, call would be too expensive, over email will be just fine? :)
Click to expand...

OK Drop me an email and I shall see if we can get them sent to you, being memory it should be no issue. :)
 
You must log in or register to reply here.
Back
Top Bottom