What "man jobs" have you done today?
- Thread starter jaybee
- Start date
Get those metal roof sheets and just put them on top of osb boards - they will soon dry out and stop noise when it rains.
If my felt ever goes that is what I shall be doing - They sell then not far from us and cut then to size.
I did post tounge in cheek due to the lack of room to fit it, - I would always put gutters on sheds as I have seen what damage can be done to them due to water splash but there if it had been mine I would have built shed in the open first then put a few roof lathes down and slid the shed down alley.
There's only me and the mrs, I'm not sure we could have moved it. Unfortunately there isn't much room at the front. I just need someone light enough to go on the roof, I'm about 100 kg so probably too heavy to go on the roof.I did post tounge in cheek due to the lack of room to fit it, - I would always put gutters on sheds as I have seen what damage can be done to them due to water splash but there if it had been mine I would have built shed in the open first then put a few roof lathes down and slid the shed down alley.
Done re-wire over last 3 days, I did all prep ie chasing out and electrician fitted everything. Went for these new Kinetic wireless switch's one pad with a long press to dim, saved chasing out all the light sockets as well. Three outside double sockets and 2 spots lights as well.
This Monday ripping out all central heating pipework in loft to install new Worcester Greenstar 8000 Life 30kW Combination boiler and pipe work, then relay all the lagging
This Monday ripping out all central heating pipework in loft to install new Worcester Greenstar 8000 Life 30kW Combination boiler and pipe work, then relay all the lagging
Caporegime
- Joined
- 21 Nov 2005
- Posts
- 41,254
- Location
- Cornwall
Wire brushed off a load of rust from a 10ft washing line pole before painting it. Took two hours and have the second one to do this afternoon. My arm feels dead though and sunbathing currently feels like a better use of my time.
Soldato
- Joined
- 16 Nov 2010
- Posts
- 16,513
- Location
- Swimming in a lake
What did the prep work entail/how much of a PITA was it? We probably need to do a significant amount of wiring, and am trying to work out the trade-off between doing a lot of the prep work ourselves vs. just letting the builder + electrician do it.
Job from me: Mounted the ring doorbell. Now to work out the movement sensitivity....
Finished the path upto the patio, was meant to make it really shallow by the time it got to the door but apparently not.
I'm now in two minds whether to rip it up (circa ten 600*900 slabs) and try again, or just leave the gap between the back door and slabs and ensure there's some decorative stone in there.
I'm now in two minds whether to rip it up (circa ten 600*900 slabs) and try again, or just leave the gap between the back door and slabs and ensure there's some decorative stone in there.
Pics to help/make fun of?Finished the path upto the patio, was meant to make it really shallow by the time it got to the door but apparently not.
I'm now in two minds whether to rip it up (circa ten 600*900 slabs) and try again, or just leave the gap between the back door and slabs and ensure there's some decorative stone in there.
Too late, ripped it all up.
We've all been there! Better than looking at it daily and wishing you'd redone it.
Just severely soul destroying.
We're going to have a step up to the path now, which I didn't want
But nevermind
I chased all the channels for the sockets, plus all the copper pipes for the central heating (7 big verticals and 2 horizontal radiators) There must have been about 32 full room height channels, which I cut with my Metabo chaser. It cost me about £430 but has been well worth it, saved about 3 days of labour and cuts very neat channels which are easy to skim up.
The down side was that mines a double brick wall with no breeze blocks so it was very hard going pushing the Metabo, plus it fills my 30L Titan hoover bags about every 4 channels. But its almost dustless just bigger debris falls to the ground. But the cost saving and neatness out ways the negatives.
Also using it to score channels in the bathroom in concrete for wet room.
I also ripped all the pipe work and electric cables out and sited everything myself, may have been easier to pay someone but the cost and mess wasn't worth it for me.
Looks great
Soldato
- Joined
- 28 Dec 2017
- Posts
- 9,227
- Location
- Beds
Cleaned up the extractor fan in the house I'm house-sitting. It was making a horrible racket rubbing on the ducting so I created a cardboard tube to hold it open. It'll work for a week or two til they sort it properly. I just want to wee with the lights on!