What software do I need to check my Line noise etc?

thanks for your help guys :)

in terms of these 3...how would I know what is good or bad?? the higher the better or lower? :confused:

Current Noise Margin: 15.0 dB (Downstream) 23.0 dB (Upstream)
Current Attenuation: 44.6 dB (Downstream) 21.5 dB (Upstream)
Current Output Power: 19.8 dBm (Downstream) 12.0 dBm (Upstream)

cheers :D
 
i really appreciate your guys help! thanks!

I got my results....are these good? :eek:

Downstream
Connection Speed 7808 kbps
Line Attenuation 29 db
Noise Margin 6 db

Upstream
Connection Speed 832 kbps
Line Attenuation 8 db
Noise Margin 10 db

If they are not what possible action can I take? :(

Thanks :)

Edit: My ISP is Aquiss and I use Netgear DG834G
 
Last edited:
when people say master socket I never know what they mean? is there one main plug in my house which is the master ? :o :p

Or do you mean take all filters out of everything and just have my adsl+filter in socket?

Thanks

Edit: and when checking logs on my netgear it appears to have loss of sincronization sometimes....not that I have ever had a problem when browsing, etc..
 
Strange I am doing as below but I cant open the box?

Then exit from the web interface and open a command-line window. Type: telnet 192.168.0.1

You should get a BusyBox welcome message to confirm that your telnet connection is established.

Using vista any ideas? :(
 
Pulse fyi! I have just opened my BT Master socket and put the cable going from the router then into a adsl filter into the hidden socket.

booted up pc now my margins have gone to a health 11db down 8db up!!! i know its early lol :p

but maybe could work for u?

Cheers :D

edit: heres a pic nicked from dovey a poster above :o :p

its the socket to the right...

http://www.clarity.it/telecoms/nte5_faceoff.jpg
 
i noticed when I put it back through the main panel my db drops very low again....guys can I just plug the dsl and filter into the main socket without any ill effects??? :confused:
 
an odd question but you know the internal wiring of the socket....should it have 2 wires for each insertion? i.e. the orange/white normally i seen one wire wedged in........in my cabling I have 2 for each wedge? :confused:
 
I have just looked at the wiring there are 2 wires in section 2 (same colour) 2 wires in section 5 (same colour)

cant remember colours but is this work from a crap electricien? :confused:
 
You must log in or register to reply here.
Back
Top Bottom