what voltage for 3.2?
- Thread starter MiNxYyY
- Start date
Soldato
- Joined
- 23 Jan 2007
- Posts
- 4,071
- Location
- Glasgow
have you looked in your mobo's manual for mem timings?
1:1 is written as 1:2 on my gigabyte DS3R, so thats how it should be. Check the RAM timings and settings (ctrl +F1 in bios to access extra settings), might need the RAM voltage upped if you havn't set it to default(although i dont see why it shouldn't be fine).
Sounds like its just re-setting your overclock , so try a lower overclock and see if you can get that working. Check load temps at stock aswell, might have a heat problem or something.
Sounds like its just re-setting your overclock , so try a lower overclock and see if you can get that working. Check load temps at stock aswell, might have a heat problem or something.
Soldato
- Joined
- 23 Jan 2007
- Posts
- 4,071
- Location
- Glasgow
from 2.4, work your way up in small increments, stress test for 15, repeat. in the long run its better to understand what your doing
Soldato
- Joined
- 23 Jan 2007
- Posts
- 4,071
- Location
- Glasgow
As DavidB has said re the mem, have a look to see what your mem has defaulted to.
dont use easytune its crap, have you got speed step turned off? i had this problem myself i cant remeber how i sorted it tho, try uninstalling easytune if you had it installed prior to using the bios, could be causing a problem.
