Permabanned
Go Scotty, you can get it done 
When Bundles, Jokester & weescott did some clocking
- Thread starter weescott
- Start date
Associate
- Joined
- 29 Dec 2005
- Posts
- 1,194
weescott said:No thread hijacks thank you
Getting closer to the WR:
Edit: Arrrrgh. Got upto 3.39 which would be a new WR for a Toledo AFAIK and i couldn't get a screen grab.
nice, try to validate them. go to 3.3 then validate, then just inscrease 1 fsb and validate each time, once you reach you limit that way, clock you cpu and voltage right down, this will get you cpu to its lowest possible temps, then clock your voltage and cpu straight up in one go then validate it, do this as fast as you can, and it will give you the fastest chance.
i assume your using systool or clockgen with volts control?
I'm whacking the volts in the bios right up and booting into windows at 2.8 (24/7 speed) then using clockgen to get that final bit further.
Next I'm going to try putting an 80m Delta over the mosfets and see if that helps.
Next I'm going to try putting an 80m Delta over the mosfets and see if that helps.
Permabanned
Got one more of them here if neede to help with some more extream air cooling
Soldato
bumpasaurus...roooooaaaarrrr!
any updates on this guys?
any updates on this guys?
cokecan72 said:bumpasaurus...roooooaaaarrrr!
any updates on this guys?
Holy thread revival batman!!!!!!!!!
Not really any progress yet so to speak, still waiting for working motherboards since Scott killed the last socket A mobbo
This WILL happen, just not sure when
OI Mr Screwdriver man!
As is happens I got the 325HTT < The max of the DFI board I have. Some people have had 330HTT but it's sketchy to say the least. Even with an 80mm Delta for cooling the Chipset. So. pending ANOTHER new mobo (Disclaimer - Bunldes was held back with Screwdriver in hand so this time it ISNT his fault) the clocking of the X2 is on hold.
Any update on the repair of the P4 board Bundles?
As is happens I got the 325HTT < The max of the DFI board I have. Some people have had 330HTT but it's sketchy to say the least. Even with an 80mm Delta for cooling the Chipset. So. pending ANOTHER new mobo (Disclaimer - Bunldes was held back with Screwdriver in hand so this time it ISNT his fault) the clocking of the X2 is on hold.
Any update on the repair of the P4 board Bundles?
P4 board is at a sparky friends house, one of those round magnetic things with the wire wrapped around them (technical term, lol. help me out here please Jokester, lol) looks a little less than happy from one of the volt mods, so we're gonna see if replacing that helps.
Come on guys, we need a decent Socket A mobbo to thrash the weescotts out of!!!!!
Come on guys, we need a decent Socket A mobbo to thrash the weescotts out of!!!!!
Last edited:
Soldato
- Joined
- 10 Apr 2004
- Posts
- 13,496
IM afraid that over on XS some dude has got 3.6/.7 ghz out of a X2 3800+.
Ill find a link but im pretty sure you've been thrashed
http://www.xtremesystems.org/forums/showthread.php?t=104674
3.7ghz, Pitty that P4C800-E didn't work, Drazic, what did you to do it?!
Ill find a link but im pretty sure you've been thrashed
http://www.xtremesystems.org/forums/showthread.php?t=104674
3.7ghz, Pitty that P4C800-E didn't work, Drazic, what did you to do it?!
Last edited:
Soldato
- Joined
- 10 Apr 2004
- Posts
- 13,496
Bundles said:Yeh, but weescottydogs is a toledo mind
3319 to beat then
Don
I reckon it would go further if I took my knife to it .
Jokester
.Jokester
Tis the mobo that's the limit I think - 325HTT....But if the cpu needs to go under the knife then do be it. As long as it doesn't end up looking like Sly's mother.
I found my socket A board but you really don't want it
It's an Elite K7SEM (V3.0). Apart from the fact that it's a crap board, the heatsink appears to have welded itself to the Duron underneath.
Stan
It's an Elite K7SEM (V3.0). Apart from the fact that it's a crap board, the heatsink appears to have welded itself to the Duron underneath.
Stan
The children have been playing again!
Loop for gfx card:
Loop for gfx card:
Last edited:
weescott said:
You had to get the magic screwdriver into it somehow huh?
The blocks surface was sitting nicely at -21c with no load with that setup, so whatever gfx card we stick it on should fly
It's nuts to think that all that stuff is going to cool ONE gfx card