I am gonna buy the Hazro stands in, so those buying these models, can add the much better stands to them.
**WHO WANTS A DELL U2711 for £329.99 Inc. VAT??? (YES THERE'S A CATCH)!!**
- Thread starter Gibbo
- Start date
I am gonna buy the Hazro stands in, so those buying these models, can add the much better stands to them.
It definitely will be better with the original stands (maybe offer as a bundle?) but the aluminium bezel was also a big selling point for me. I could get it with the 30" model but think 27" is the sweet-spot with the wider field-of-view in games.
I've continued trawling through the Hazro thread on the forum and found this one from January http://forums.overclockers.co.uk/showpost.php?p=20986363&postcount=2504 where 'hazro' explains their reasons for going with the cheap looking plastic surround for the WB model. So I guess it's not just a 'one-off' but the current model after all, despite the fact that their website still hasn't been updated 8 months later.
How are you finding it compared to the DGM or a DELL? I hate glossy screens so I'm concerned that the DGM would be too reflective for me and the DELL has a load of additional inputs and features I just don't need and which make it more laggy in games, not to mention the price difference.
I've continued trawling through the Hazro thread on the forum and found this one from January http://forums.overclockers.co.uk/showpost.php?p=20986363&postcount=2504 where 'hazro' explains their reasons for going with the cheap looking plastic surround for the WB model. So I guess it's not just a 'one-off' but the current model after all, despite the fact that their website still hasn't been updated 8 months later.
How are you finding it compared to the DGM or a DELL? I hate glossy screens so I'm concerned that the DGM would be too reflective for me and the DELL has a load of additional inputs and features I just don't need and which make it more laggy in games, not to mention the price difference.
Hi there
Here is the Hazro stand:-
Hazro EM312222 3-Axis Fully Adjustable Stand - Black @ £79.99 inc VAT
The Hazro EM31222 is a 3-axis fully adjustable stand offering elevation, tilt, rotation and swivel. Designed as a superior alternative to cheaper plastic models, anodized aluminium is used throughout offering a lightweight stand capable of handling monitors and televisions up to 30" (or 15kg).
The EM31222 was specifically optimized to remain sturdy at peak loads and the elegant design makes it a one-time investment allowing for use with numerous displays over many years to come. Both VESA 100x100 and 75x75 displays are compatible and the stand comes complete with thumb screws for quick attachment.
Once attached, the EM31222 offers an elevation range of +/- 388mm with complete 90 degrees rotation. A quick release locking mechanism allows the height to be set and a locking clamp is included; securing the display when swivel exceeds 60 degrees (this prevents the display from toppling). A unique patent pending add-on can also be purchased separately allowing the same stand to be attached to the Apple 27-inch LED display.
This stand comes packed in a neat carry carton requiring self-assembly by the user. All accessories are provided including spacers for displays with shallow VESA threads (e.g. the Hazro HZ27* models)
Features:-
- Satisfies UL 1678 Tip Test
- VESA 100x100 and 75x755 compatible
- Load Range: 0-15kg (2-33 lbs)
- Maximum Size of Display: 30"
- Elevation Range: 388mm without monitor
- Rotation: 90° single direction (portrait or landscape mode)
- Swivel: 60° (bi-direction)
- Tilt: 105°
- Material: Anodized aluminium
- Carton Dimensions: 21" x 10.6" x 4.6" (536 x 269 x 116 mm)
- Carton Weight: 6 lbs (3 kg)
- Warranty: Three (3) years
- Retail Part Number: EM31222 (Hazro: HZST02)
- EAN: 0610373926533 (UPC: 610373926533)
Only £79.99 inc VAT.
ORDER NOW
Here is the Hazro stand:-
Hazro EM312222 3-Axis Fully Adjustable Stand - Black @ £79.99 inc VAT
The Hazro EM31222 is a 3-axis fully adjustable stand offering elevation, tilt, rotation and swivel. Designed as a superior alternative to cheaper plastic models, anodized aluminium is used throughout offering a lightweight stand capable of handling monitors and televisions up to 30" (or 15kg).
The EM31222 was specifically optimized to remain sturdy at peak loads and the elegant design makes it a one-time investment allowing for use with numerous displays over many years to come. Both VESA 100x100 and 75x75 displays are compatible and the stand comes complete with thumb screws for quick attachment.
Once attached, the EM31222 offers an elevation range of +/- 388mm with complete 90 degrees rotation. A quick release locking mechanism allows the height to be set and a locking clamp is included; securing the display when swivel exceeds 60 degrees (this prevents the display from toppling). A unique patent pending add-on can also be purchased separately allowing the same stand to be attached to the Apple 27-inch LED display.
This stand comes packed in a neat carry carton requiring self-assembly by the user. All accessories are provided including spacers for displays with shallow VESA threads (e.g. the Hazro HZ27* models)
Features:-
- Satisfies UL 1678 Tip Test
- VESA 100x100 and 75x755 compatible
- Load Range: 0-15kg (2-33 lbs)
- Maximum Size of Display: 30"
- Elevation Range: 388mm without monitor
- Rotation: 90° single direction (portrait or landscape mode)
- Swivel: 60° (bi-direction)
- Tilt: 105°
- Material: Anodized aluminium
- Carton Dimensions: 21" x 10.6" x 4.6" (536 x 269 x 116 mm)
- Carton Weight: 6 lbs (3 kg)
- Warranty: Three (3) years
- Retail Part Number: EM31222 (Hazro: HZST02)
- EAN: 0610373926533 (UPC: 610373926533)
Only £79.99 inc VAT.
ORDER NOW
Soldato
- Joined
- 26 Dec 2005
- Posts
- 16,138
- Location
- Paisley
Hi there
Here is the Hazro stand:-
Hazro EM312222 3-Axis Fully Adjustable Stand - Black @ £79.99 inc VAT
The Hazro EM31222 is a 3-axis fully adjustable stand offering elevation, tilt, rotation and swivel. Designed as a superior alternative to cheaper plastic models, anodized aluminium is used throughout offering a lightweight stand capable of handling monitors and televisions up to 30" (or 15kg).
The EM31222 was specifically optimized to remain sturdy at peak loads and the elegant design makes it a one-time investment allowing for use with numerous displays over many years to come. Both VESA 100x100 and 75x75 displays are compatible and the stand comes complete with thumb screws for quick attachment.
Once attached, the EM31222 offers an elevation range of +/- 388mm with complete 90 degrees rotation. A quick release locking mechanism allows the height to be set and a locking clamp is included; securing the display when swivel exceeds 60 degrees (this prevents the display from toppling). A unique patent pending add-on can also be purchased separately allowing the same stand to be attached to the Apple 27-inch LED display.
This stand comes packed in a neat carry carton requiring self-assembly by the user. All accessories are provided including spacers for displays with shallow VESA threads (e.g. the Hazro HZ27* models)
Features:-
- Satisfies UL 1678 Tip Test
- VESA 100x100 and 75x755 compatible
- Load Range: 0-15kg (2-33 lbs)
- Maximum Size of Display: 30"
- Elevation Range: 388mm without monitor
- Rotation: 90° single direction (portrait or landscape mode)
- Swivel: 60° (bi-direction)
- Tilt: 105°
- Material: Anodized aluminium
- Carton Dimensions: 21" x 10.6" x 4.6" (536 x 269 x 116 mm)
- Carton Weight: 6 lbs (3 kg)
- Warranty: Three (3) years
- Retail Part Number: EM31222 (Hazro: HZST02)
- EAN: 0610373926533 (UPC: 610373926533)
Only £79.99 inc VAT.
ORDER NOW
Ooh, could I use this on my 27 WC 8 bit one from last year?
Soldato
- Joined
- 26 Dec 2005
- Posts
- 16,138
- Location
- Paisley
shame they only have DVI, same problem with the hazro I have, I cant use it for my laptop since it has no DVI.
Yes, it's a VESA mount so will work with the majority of monitors.
However, at this price, I'd look at getting an ergotron arm or something similar.
Soldato
- Joined
- 27 Dec 2009
- Posts
- 2,727
- Location
- Gillingham, Kent
Then you are hanging out with the wrong girls! There's a couple of girly geeks in my office for whom a 27 inch monster like this would definitely assist in the pulling process.
It wasn't sitting there long.
Less than 20 minutes after I set it up the screen went off and I can't get it to work again. I've tried restarting PC and monitor, different ports, different cables, different PCs. The blue light is on and each PC recognises the monitor, but the screen itself is off.
Before it died the screen looked good with no dead or stuck pixels. It was too bright though and the brightness buttons did not work so I had to turn down the brightness on the graphics card (GTX 580). It also didn't come with a factory calibration and the gamma was a little high.
My worst fears about Hazro appear to have become reality.
Less than 20 minutes after I set it up the screen went off and I can't get it to work again. I've tried restarting PC and monitor, different ports, different cables, different PCs. The blue light is on and each PC recognises the monitor, but the screen itself is off.
Before it died the screen looked good with no dead or stuck pixels. It was too bright though and the brightness buttons did not work so I had to turn down the brightness on the graphics card (GTX 580). It also didn't come with a factory calibration and the gamma was a little high.
My worst fears about Hazro appear to have become reality.
Permabanned
- Joined
- 2 Sep 2012
- Posts
- 66
I bought this monitor and it arrived today....... in short I AM NOT HAPPY.....
I come home from work excited because my new monitor and 7970 are waiting for me.
Let down number 1; The monitor is different from the one pictured on the website http://www.overclockers.co.uk/showproduct.php?prodid=MO-019-HO (the pictures are clearly of a shiny glass finish, the one I received is horrible matt and the casing was a bit different)
Let down number 2; The description says the monitor stand had up/down tilt and swivel, it has non of these and is a standard stand.
Let down number 3; The monitor came with NO SCREWS to attach the stand...
Let down number 4; THE MONITOR DOESN'T EVEN WORK..... I press the button to turn on and the blue light comes on, that's it, the screen doesn't even turn on, just stays black.
Let down number 5; I have already sold my old monitor which had to be shipped today, so I am now writing this on my phone and cant use my PC
Let down number 6; I cant even test or use my new 7970!!!!
This is the first time I have ordered anything over £20 from OCUK, and my god..... I am more than let down, I am sure you would agree if this was you after a hard day of work looking forward to your nice monitor and GPU when you get home..... you would be as mad as I am.
I actually cant believe it
I come home from work excited because my new monitor and 7970 are waiting for me.
Let down number 1; The monitor is different from the one pictured on the website http://www.overclockers.co.uk/showproduct.php?prodid=MO-019-HO (the pictures are clearly of a shiny glass finish, the one I received is horrible matt and the casing was a bit different)
Let down number 2; The description says the monitor stand had up/down tilt and swivel, it has non of these and is a standard stand.
Let down number 3; The monitor came with NO SCREWS to attach the stand...
Let down number 4; THE MONITOR DOESN'T EVEN WORK..... I press the button to turn on and the blue light comes on, that's it, the screen doesn't even turn on, just stays black.
Let down number 5; I have already sold my old monitor which had to be shipped today, so I am now writing this on my phone and cant use my PC
Let down number 6; I cant even test or use my new 7970!!!!
This is the first time I have ordered anything over £20 from OCUK, and my god..... I am more than let down, I am sure you would agree if this was you after a hard day of work looking forward to your nice monitor and GPU when you get home..... you would be as mad as I am.
I actually cant believe it
Last edited:
Associate
- Joined
- 8 Feb 2008
- Posts
- 801
- Location
- UK
sorry to hear that guys, hope it gets sorted pronto.
Permabanned
- Joined
- 2 Sep 2012
- Posts
- 66
The person I spoke to on the phone earlier said that they were going to get the product info changed.
But its still the same... Is it not false advertising?
I would hate for someone else to be severely disappointed when the completely wrong monitor turns up.
In fact I would advise not to buy this at all.... 2 have turned up pretty much DOA both the same and 1 with missing parts, their quality control must be... zero, they must have just put these together and sent them straight to OCUK without even checking if they work or not... let alone even trying to collaborate them.
But its still the same... Is it not false advertising?
I would hate for someone else to be severely disappointed when the completely wrong monitor turns up.
In fact I would advise not to buy this at all.... 2 have turned up pretty much DOA both the same and 1 with missing parts, their quality control must be... zero, they must have just put these together and sent them straight to OCUK without even checking if they work or not... let alone even trying to collaborate them.
I bought this monitor and it arrived today....... in short I AM NOT HAPPY.....
I come home from work excited because my new monitor and 7970 are waiting for me.
Let down number 1; The monitor is different from the one pictured on the website http://www.overclockers.co.uk/showproduct.php?prodid=MO-019-HO (the pictures are clearly of a shiny glass finish, the one I received is horrible matt and the casing was a bit different)
Let down number 2; The description says the monitor stand had up/down tilt and swivel, it has non of these and is a standard stand.
Let down number 3; The monitor came with NO SCREWS to attach the stand...
Let down number 4; THE MONITOR DOESN'T EVEN WORK..... I press the button to turn on and the blue light comes on, that's it, the screen doesn't even turn on, just stays black.
Let down number 5; I have already sold my old monitor which had to be shipped today, so I am now writing this on my phone and cant use my PC
Let down number 6; I cant even test or use my new 7970!!!!
This is the first time I have ordered anything over £20 from OCUK, and my god..... I am more than let down, I am sure you would agree if this was you after a hard day of work looking forward to your nice monitor and GPU when you get home..... you would be as mad as I am.
I actually cant believe it
From what i can see the description is accurate enough. It says "hazro" and what you have described is classic hazro.
Permabanned
- Joined
- 2 Sep 2012
- Posts
- 66
Never knew Hazro were that bad.... on all the product reviews the ratings are very good, I suppose OCUK just dont allow the bad ratings on the site or something.... which kind of makes the entire point of a rating system completely useless.
