XSPC H2 TITAN TRI-SLI GOODNESS

whyscotty · 10 Apr 2013 at 21:15

Piccy time

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Not the best photo's, Gpu blocks still not available so will be running cards on air

whyscotty · 10 Apr 2013 at 21:46

pgi947 said:
Looking good

The noctua fans, for once, don't actually look too bad with the colours going on behind it!

What happened to the un-inverted motherboard layout?

Had to swap mobo back as lost the room for the thick 480

Do you ever have the feeling of wishing you never started a rebuild

The fans don't look to bad, but they will be covered once the sides go on

whyscotty · 10 Apr 2013 at 21:53

GoogalyMoogaly said:
Guessing this made routing easier if going dual-loop. 360 in the bottom for CPU and 480 in the top for GPUs.

Yep, that was the plan.

whyscotty · 11 Apr 2013 at 18:04

Kaapstad said:
Once you get the waterblocks on the GPUs I think the inverted mobo will make things look much better.

You are using those quick release sockets, which ones are they and do they work well ?

VL3N Koolance quick dis connects from here

They work very well, made a **** up with tube length (couldn't fit the Ram)

Twist and unlock, renew tube job's a good un

Well worth it, I shall be getting some more

Gregster said:
Coming on nice Neil.

Cheers, its taking a bit longer than I'd hoped for.

No a lot of room to hide the cables, on my 4th routing :mad:

coolamasta said:
Looking good, really like those XSPC cases

Thanks,

When I first started rebuilding I thought I'd made a mistake choosing it, just takes a bit more care/planning

whyscotty · 11 Apr 2013 at 22:07

Test run

Uploaded with ImageShack.us

whyscotty · 11 Apr 2013 at 23:37

pgi947 said:
Coming along nicely

How are the noctua fans holding up on the rad?

^^^?

Well all done till I get my blocks.

Will do some better photo's now its in its new home

Need a better (non white solution) of mounting my SSD's

Uploaded with ImageShack.us

whyscotty · 12 Apr 2013 at 07:14

They are performing excellent, as I post this my CPU idle temp is 23 degree's

whyscotty · 12 Apr 2013 at 07:53

Kaapstad said:
Could you give me the link to which ones you are using, I had a quick look at the Koolance fittings and found it a bit confusing finding the right ones.

Are you using 7/16 ID hoses as well.

Thanks

Yes, that's the tube size

http://www.overclockers.co.uk/showproduct.php?prodid=WC-064-KA&groupid=962&catid=1529&subcat=2305

http://www.overclockers.co.uk/showproduct.php?prodid=WC-057-KA&groupid=962&catid=1529&subcat=2305

They are bringing some new ones out shortly

whyscotty · 12 Apr 2013 at 09:41

The linked ones are compression fittings

whyscotty · 16 Apr 2013 at 16:11

Blocks should be here tomorrow

whyscotty · 16 Apr 2013 at 16:51

Damn, the sli flow bridge's are on back order

whyscotty · 16 Apr 2013 at 21:08

Somthing Else said:
Shame about that Scotty, take some solace in the knowledge that I look and my pc with scorn because it has just one lowly 7970

Cheers

7970's they are great cards

I miss mine, more fun to tweak

whyscotty · 16 Apr 2013 at 21:26

Somthing Else said:
When you had the crossfire 7970's how did you find them? were they more trouble to use than just a single one?

I enjoyed them, no issues so to speak of.

Was seriously considering trifire, then the Titans came out - and the rest is history as they say

whyscotty · 17 Apr 2013 at 17:12

V3teran said:
I know im right as everything i have posted on Ocuk is not an Opinion, its factual, Tried and Tested through much experience with many sources available to prove what i state!

No one said you was wrong.

This is a build log, not a help me thread as that's what my thread in water cooling is for.

By all means post recommendations and help in there as it will be appreciated.

I don't want any arguments in this thread.

I want to run 2 loops with 2 bay res/pump combo's, as when I decided on the case it was the first thing I thought of.

If its a bad call its my bad call

whyscotty · 17 Apr 2013 at 17:12

Uncle Petey said:
Reeeally wanna see blocks on there Scotty

Just waiting for delivery

whyscotty · 17 Apr 2013 at 17:50

3 of these inbound

whyscotty · 17 Apr 2013 at 18:15

Don't think I'll be using the lights though

whyscotty · 18 Apr 2013 at 14:42

Parcels - home - waiting = fun time

whyscotty · 18 Apr 2013 at 15:37

Kaapstad said:
Neil could you post plenty of pics on how to put the blocks on your GPUs please, I am using the same blocks and will be fitting them in the next week or two.

Thanks

No.

No probs mucca, there is a YouTube video which I'll link when I get home

whyscotty · 18 Apr 2013 at 16:36

A few more bits and bobs turned up, just waiting for the flow bridges

Uploaded with ImageShack.us