Robocain - Robocop 2 robot
- Thread starter Building Candy
- Start date
Associate
- Joined
- 5 Oct 2008
- Posts
- 2,275
- Location
- West Sussex
Incredible, good luck. Will be following your site.
- Joined
- 8 Nov 2006
- Posts
- 1,451
yes, christmas, I said in post 333.
- Joined
- 8 Nov 2006
- Posts
- 1,451
Done the little finger tips, quite had as the "pad" as I said is wider than the finger part
then drill everything 2mm or 1.7mm if its going to be taped to M2 thread. Each joint has a screw both sides except the ones with the hydraulic pipe fitting, so all screws had to be cut down accordingly.
then there was a big spark! and he's got me aaaaaaaaaghghhhhhhhh
..... it gets worse, he dives for the knife!
PUT THE KNIFE DOWN! it'll be ok. I manage to persude him to give up and let me trial fit to the shoulder.
Ok back to work, no where near finished yet im afraid, each finger section thats each one, needs a little protective cap. These are so small and fiddly I will have to use styrene, made a start on one.
more on Thursday.
then drill everything 2mm or 1.7mm if its going to be taped to M2 thread. Each joint has a screw both sides except the ones with the hydraulic pipe fitting, so all screws had to be cut down accordingly.
then there was a big spark! and he's got me aaaaaaaaaghghhhhhhhh
..... it gets worse, he dives for the knife!
PUT THE KNIFE DOWN! it'll be ok. I manage to persude him to give up and let me trial fit to the shoulder.
Ok back to work, no where near finished yet im afraid, each finger section thats each one, needs a little protective cap. These are so small and fiddly I will have to use styrene, made a start on one.
more on Thursday.
Done the little finger tips, quite had as the "pad" as I said is wider than the finger part
more on Thursday.
awww it's like an ickle robot baby
Soldato
- Joined
- 12 May 2005
- Posts
- 12,631
awww it's like an ickle robot baby
Was thinking that lol
Soldato
- Joined
- 1 Oct 2003
- Posts
- 14,341
- Location
- Huddersfield
Thanks for the updates dude, your work continues to stun and entertain! 
- Joined
- 8 Nov 2006
- Posts
- 1,451
Ok getting better with styrene now
easy to work the stuff as its so soft, but quite easy to make a mistake too
giving it all a blast with grey paint
not easy to file these like this by hand
now this looks good!
very proud of myself here
easy to work the stuff as its so soft, but quite easy to make a mistake too
giving it all a blast with grey paint
not easy to file these like this by hand
now this looks good!
very proud of myself here
