Sounds promising, I would have expected nothing but almonds on the smell.
I tried it now. Must need a lot of steeping because I get no distinct flavour at all yet, but it's certainly got sweetness. Absolutely no marzipan as yet. Me and juices - fail!

Too early for me to judge to be fair, needs a week maturing at least.
Well chaps, I am absolutely chuffin' chuffed with myself. I lost my virginity and did my first ever microcoil! Beginners luck perhaps, but it was much easier than I expected, nailed it first time and no wasted kanthal!
Found my old set of mini silver handled screwdrivers of varying thickness and used one which is probably around 2mm or slightly less. Cut off about 15cm of 0.3mm/28 kanthal, held in tweezers and torched it for about 30/40 seconds in the blue flame part from a bic lighter. Wrapped it about 10 times, pressed it up against the handle of the screwdriver to compress it then transferred it to tweezers. Torched it while compressing more. Transferred back to the screwdriver and installed it with no problem this time getting through the holes of the IGO-W. Adjusted it so coil wasn't touching the posts, then tightened the post screws down. Then pulsed and compressed it a few times more. Was easier working on it having the dripper attached to the mod.
Was a bit high from the deck so pushed it down a little, trying not to mis-shape or break it. But yeah, this wire is pretty solid and resilient once coiled and torched. It's not perfect, coils could still be tighter together but works perfectly! Used a tiny piece of cotton pleat and it went through pretty easy. Resistance coming out as 1.6 ohms.
The throat hit is ridiculous compared to the evod, much stronger!






