• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

ASROCK X570 TAICHI - THE RYZEN 3000 MOTHERBOARD GIBBO & 8 PACK RECOMMENDS

Nghtmare said:
I dont know what they do honestly.
Click to expand...
I think its down to a cold booting voltage issue as even when getting the ram prime and overnight ram test stable a week or so later it would fail to boot and reset to default.

Also at 3733 I wasn't able to lock in trdrd lower than 17 whereas on my B450 tomahawk I was able to set 3800 14/14/14 with the same ram type etc but maybe my brother just got a duff kit.
 
Joxeon said:
I think its down to a cold booting voltage issue as even when getting the ram prime and overnight ram test stable a week or so later it would fail to boot and reset to default.

Also at 3733 I wasn't able to lock in trdrd lower than 17 whereas on my B450 tomahawk I was able to set 3800 14/14/14 with the same ram type etc but maybe my brother just got a duff kit.
Click to expand...
I mean it all depends on the kit. I always look at latency and transfer rate results to determine if the overclock is working.

fI8TmUp.jpg

fI8TmUp
 
Last edited:
3.61 boys
Update AMD AGESA ComboAM4v2 1.1.0.0 Patch C

I only checked because I am getting a 5800X today, and wanted to makes sure it was the latest one lol
 
Nghtmare said:
3.61 boys
Update AMD AGESA ComboAM4v2 1.1.0.0 Patch C

I only checked because I am getting a 5800X today, and wanted to makes sure it was the latest one lol
Click to expand...

Cheers!

According to Tom at OC3D and also mentioned by Kit Kuru, AMD said patch c will unlock IF @ 2000mhz for those chips capable.
 
chris.london said:
I have an odd problem.
I have just received my 5950x. It works fine, but according HWinfo the average voltage on all cores is 1.45V+. I haven’t had time to do much, so that is just on desktop with a few browser tabs open, with 80% of the cores asleep. HWinfo seems to report the clock speeds correctly. Ryzen Master shows an average voltage of 0.5V (I think, maybe have misread it, but it definitely looked ok).
I am currently on bios version 3.61, but tried 3.40 too. I haven’t changed any settings. I installed the latest AMD chipset driver and I use the balanced power plan. I tried the latest stable and beta versions of HWinfo (6.34 should support the new processors). I haven’t reinstalled Windows or cleared CMOS yet.
Is anyone having similar issues with HWinfo? As far as I remember it worked fine with my 3700x regardless of the bios version.
Click to expand...
Can you post a screenshot of HWINFO64 showing what you mean? I believe the CPU voltage will be locked at 1.4v ish for a few minutes after Windows boots. But after 5 min or so it should drop assuming the system is truly idle.

if the system is under light load, browsing, watching video and even some gaming then 1.45ish volts is normal and allows a few CPU cores to boost to a high frequency.
 
Just going to install my 5900X on the latest 3.8 BIOS.

I hope this board plays nicely with Zen 3. Part of me wants an excuse to sell it and buy a Dark Hero. PBO has never worked properly for me and the chipset fan is the loudest thing in my system even on silent.
 
Well she is alive! Always a good start.

Now to see what IF speeds are achievable.

PBO still seems entirely broken. Won't boost properly in all core loads. Useless!
 
Last edited:
Has anyone managed to get PBO to work on this board?

Mine was broken with my 3900X and continues to be broken on 5900X.

I'm ready to bin this board now. All core boost clocks are terrible with my 5900X.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom