ClockTuner 2.0 for Ryzen... do YOU have a Golden Sample? Post your results here. :)

SaintJimmy · 20 Feb 2021 at 16:50

DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 63.1°
Energy efficient: 4.01
Your CPU is SILVER SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4625 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4700 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4375 MHz

Now if only my motherboard would stop resetting my settings every few days then that would be great.

pc-guy · 21 Feb 2021 at 10:28

Jealous...

Anonymous_0172 · 21 Feb 2021 at 22:18

DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 64.3°
Energy efficient: 4.1
Your CPU is GOLDEN SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4675 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4750 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4425 MHz

Yup, that'll do

Retro89 · 21 Feb 2021 at 23:15

DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 48.6°
Energy efficient: 4.22
Your CPU is GOLDEN SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4775 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4850 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4500 MHz

DoneADougalOnSofa · 22 Feb 2021 at 06:01

Meh, first crash last night. Straight blackscreen and reboot during Cities:Skylines. That's never happened before.

Gonna wind me RAM back down to 3200 methinks.

woppy101 · 22 Feb 2021 at 12:17

DoneADougalOnSofa said:
Meh, first crash last night. Straight blackscreen and reboot during Cities:Skylines. That's never happened before.

Gonna wind me RAM back down to 3200 methinks.

Try giving a little more volts the the infinity fabric

DoneADougalOnSofa · 22 Feb 2021 at 15:05

woppy101 said:
Try giving a little more volts the the infinity fabric

I had the SoC at 1.050v as recommended by Dram Calculator, set it back to Auto and all seems to be well again!

woppy101 · 22 Feb 2021 at 17:54

DoneADougalOnSofa said:
I had the SoC at 1.050v as recommended by Dram Calculator, set it back to Auto and all seems to be well again!

That’s low TBH, I run mine at 1.15v iirc auto has it at 1.2v

humbug · 22 Feb 2021 at 18:19

woppy101 said:
That’s low TBH, I run mine at 1.15v iirc auto has it at 1.2v

+1

1.050V is too low, 1.1V should be enough for XMP or up to 1.2V if overclocking.

DoneADougalOnSofa · 22 Feb 2021 at 18:34

humbug said:
+1

1.050V is too low, 1.1V should be enough for XMP or up to 1.2V if overclocking.

Apparently so!

ADP · 25 Feb 2021 at 21:42

Hi everyone, I tried to run the diagnostics, I get the following messages:

Cinebench R20 started
Cinebench stopped! 25/02/2021 21:33:21
PPT limit reached! 204.5W OC terminated!

Then the process stops.

Any Ideas?

ADP · 25 Feb 2021 at 23:31

It's OK, I sorted the problem.

Richdog · 26 Feb 2021 at 04:20

Re-ran the test today after upgrading my cooler to a Noctua NH-D15...

-----------------------------------------------

OLD COOLING AND ORIGINAL RESULT:

DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 58.1°
Energy efficient: 3.8
Your CPU is BRONZE SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4500 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4575 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4250 MHz

NEW COOLING:

DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 71.8°
Energy efficient: 3.88
Your CPU is SILVER SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4550 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4625 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4300 MHz

-----------------------------------------------

ADP said:
It's OK, I sorted the problem.

Might help others if you at least say what the problem was and how you sorted it?

eeek · 26 Feb 2021 at 07:57

heartburnron said:
Kind of makes a mockery of awarded label then doesn't it. I mean, it's more a measure of how optimal your conditions are for the chip than the actual chip itself isn't?

Not really, the speed your fan runs at is an external factor that the software cannot control but you can.

ADP · 26 Feb 2021 at 10:40

Richdog said:
Might help others if you at least say what the problem was and how you sorted it?

My Bad, First of all my CPU is a Silver Sample.

In my Motherboard BIOS, I had the PBO Limit setting set to 'ENABLED', i found out that this setting tells the motherboard to provide the CPU with as much current as it could, which explains why my CPU temperatures were slightly on the high side.

So I changed the PBO Limit setting to 'AUTO'. After rebooting back into Windows, the benchmark was able to run after that. It looks like the benchmark didn't think that my system was safe enough to overclock and run with the setting that I had.

My CPU temperatures also came down.

cosmogenesis · 26 Feb 2021 at 10:43

DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 56.6°
Energy efficient: 3.84
Your CPU is SILVER SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4525 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4600 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4275 MHz

So now do I go into the profile management and apply P1 or P2 profile?

Richdog · 26 Feb 2021 at 13:10

cosmogenesis said:
DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 56.6°
Energy efficient: 3.84
Your CPU is SILVER SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 4525 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 4600 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 4275 MHz

So now do I go into the profile management and apply P1 or P2 profile?

Read the app instructions and experiment.

humbug · 26 Feb 2021 at 16:55

Interesting....

Some AMD 5600X and 5800X CPUs come with two CCDs

https://www.kitguru.net/components/...0x-and-ryzen-7-5800x-cpus-come-with-two-ccds/

This is quite normal, it's likely that one of the CCD's for a 5900/50X was defective and it was salvaged as a 5600X or a 5800X, its the same thing as an 8 core CPU failing one or two cores is salvages as a 6 core, most 6 core CPU's are probably like this.

I just think its interesting because with this application you can see if you have one of these salvaged chips, and i have

Proof that this shouldn't be a problem, my sample is a golden sample and clocks well.

!bluetonic! · 27 Feb 2021 at 17:42

***ClockTuner for Ryzen 2.0 RC3 by 1usmus***
AMD Ryzen 7 5800X 8-Core Processor
MSI B450M MORTAR MAX (MS-7B89)
BIOS ver. 2.C0 SMU ver. 56.44.00
TABLE ver. 3672324
DRAM speed 3600 MHz
02/27/2021 10:48:52

Phoenix ready!
Cinebench R20 started
Cinebench R20 finished with result: 5954
Voltage: 1.414 V PPT: 130.9 W Temperature: 72.4°
11:08:54: Silicon FIT measurement started...
11:09:23: Silicon FIT measurement done!
11:09:23: Stress test stopped.

Default curve coefficients
CORE#1 11 CPPC 150
CORE#2 4 CPPC 143
CORE#3 0 CPPC 127
CORE#4 1 CPPC 135
CORE#5 4 CPPC 146
CORE#6 1 CPPC 131
CORE#7 9 CPPC 150
CORE#8 4 CPPC 139

AVX light mode
Cycle time: 60000 ms
Reference frequency: 4375MHz
Reference voltage: 1187 mV
Voltage step: 6 mV

Manual overclocking mode enabled
11:09:24: CCX1 (127): 4375 MHz, 1187 mV
11:09:25: Step# 1. Diagnostic VID: 1187 mV

...

14:30:15: Stress test 2 started...
14:30:21: CCX1 VID injection: 4.1%
14:30:52: Stress test stopped.
14:30:53: Step# 159. Diagnostic VID: 239 mV
14:30:54: Stress test 1 started...
14:30:59: CCX1 VID injection: 2.6%
14:31:30: Stress test stopped.
14:31:32: Stress test 2 started...
14:31:38: CCX1 VID injection: 3.2%
14:32:05: Thread# 4 fall down!
14:32:05: Stress test stopped.
14:32:07: Step# 160. Diagnostic VID: 245 mV

DIAGNOSTIC RESULTS
AMD Ryzen 7 5800X 8-Core Processor
Max temperature: 53.4°
Energy efficient: 17.86
Your CPU is PLATINUM SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 6350 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1325 mV
Reference frequency: 6425 MHz
Recomended values for undervolting:
Reference voltage: 1125 mV
Reference frequency: 6075 MHz

Phoenix deactivated!

Surely this is wrong..

humbug · 27 Feb 2021 at 18:02

Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 6350 MHz

Try it