The SFF Case Gallery And Specs Thread

well got it up and running need to strip it and try again with the cables (nest)

Antec fusion remote black
corsair hw650w
intel q6600
Gainward 4870 golden sample
Mini ninja
lg blu/hd-dvd
1tb+360gb
8gb corsair xms2

idle temps are 33c load about 45c

dsc0053ggt.jpg


dsc0054x.jpg


dsc0057dws.jpg

What size are them fans m8 on the right ?
 
- Aluminum plate front bezel with Vacuum Fluorescent Display (VFD)
- Triple chamber structure to separate heat and noise of power supply
- Removable HDD brackets with extra soft silicone grommets to reduce vibrational noise
- 2 x sidemounted 120mm Tri-Cool™ 3-speed fans
- Low profile desktop height to fit in any environment
- Front Accessible: 1 x 5.25"
- Internal 2 x 3.5"
- 4 Expansion Slots
- Motherboard: Micro ATX form factor (9.6" x 9.6")
- Front-mounted ports fo reasy multimedia connections
- 2 x USB 2.0
- 1 x IEEE 1394 (FireWire®, i.Link®)
- Audio In and Out
- Durable 0.8mm cold rolled steel construction
 
Capture.jpg


Form Factor: mITX
Manufacturer: A+ CS-Cupid-2 miniITX Case
CPU: Atom N330
RAM: Kingston HyperX 4GB (2x2GB) DDR2 6400C4 800MHz Dual Channel
HDD(s): Corsair Extreme X32 32GB 2.5" SATA-II Solid State Hard Drive
GFX: nVidia GeForce 9400 Ion
Speed (if overclocked):
Temps: 52 Degrees C (i think)
 
Any small cases for a ATX system?


EVGA. nForce 650i ultra Intel Core 2 Duo Wolfdale E8200 2.66GHz
6MB Cache Dual Core 1333MHz 2 Gig DIMM-DRAM NVIDIA GeForce 8800 GTS with 512 DDR3 memory (PCIe 1.00 x16)
 
Last edited:
I'm just about to build up a Lian Li Mini-Q (PC-Q07)



Intel Core 2 Quad Q9550 2.83GHz
ZOTAC GF9300-D-E / GeForce 9300 / ITX Motherboard
1TB Samsung HD103UI EcoGreen F1
4GB (2x2GB) Corsair TwinX XMS2 DDR2 (until my GEIL 8GB (2x 4GB) Black Dragon turns up)
550W Corsair CMPSU-550VXUK

Should be a little flyer.. going to be used mainly for Photoshop and Lightroom.
 
Last edited:
Neil,
If you have built that rig up by now, hows it performing ?

Mainly im interested in how hot that high end CPU is running "trapped" under that PSU, with limited spare.

Are you running the PSU with fan facing CPU, or sucking in cold air thru the panel ?
 
Neil,
If you have built that rig up by now, hows it performing ?

Mainly im interested in how hot that high end CPU is running "trapped" under that PSU, with limited spare.

Are you running the PSU with fan facing CPU, or sucking in cold air thru the panel ?

hi, yes its built and running however im waiting on the Geil to turn up still (damn snow).. even with "just" 4gb its performing very well, photoshop cs3 loads pretty much instantly for example.

idle temps on the stock intel cooler are about 45c. processing stuff in lightroom so far ive had it up to low 60's.

i am getting a replacement cooler, not for the temps but for less noise lol

psu is blowing out through the side panel.

hope that helps :)
 
Working on an Sg-05 build at the moment, unfortunately I'm waiting for the rest of the bits (due to the weather here).

i3crp1.jpg


20qlwxw.jpg


xn6wxl.jpg


nlr8cm.jpg


PSU

2djpfdf.jpg


Specs will be the Zotac 775 WiFi, e3200 2.4ghz, 2x1gb DDR2, 9600GT, 320Gb 2.5". Fairly capable media/games machine on a budget.
 
Last edited:
Hey, yeah. It' a Siberian Tiger (NorthQ), same pump, block etc but slightly different rad iirc.

I have just redrilled the holes about 12-15mm lower and used a 2.5" HDD.
 
Raikiri, would you be free for a chat on MSN tomorrow? :)

Yeah, should be at some point after 5.

I got the motherboard and CPU today so done some test fitting, not sure if the graphics card I bought will fit.

Might have to get something smaller like a 5750.

2llodid.jpg


1gq6bc.jpg


34y2n9f.jpg


Shouldn't be too bad once the PSU is completely sleeved, still a squeeze though.
 
Last edited:
Back
Top Bottom