Soldato
Stock and bios and voltage would make more sense here Kaap
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
The ASIC benching thread, what does yours boost up to ?
- Thread starter Kaapstad
- Start date
Caporegime
I did think about it but there are so many non ref cards and bios that it would be difficult.
Associate
I don't think stock setting will show anything important as all the numbers will be near enough the same for any given card series.
It's all or nothing as you push the card to the limit and see how far your asic % takes you. In my case, not very far
It's all or nothing as you push the card to the limit and see how far your asic % takes you. In my case, not very far
I don't think stock setting will show anything important as all the numbers will be near enough the same for any given card series.
It's all or nothing as you push the card to the limit and see how far your asic % takes you. In my case, not very far
Over time if we get enough results a pattern should start forming.
Caporegime
Its a good idea Kaap
Soldato
Here is mine -
Zotac AMP 980ti - Custom bios enabling 325W (130%) TDP only running using a Nzxt G10 with a corsair H110 water.
Very happy to see this thread I hope we get some support I really want to see whether ASIC really makes a difference. I suspect it makes a difference for VDDC but I have seen a throttle under air that I no longer see under water because my temps are always below 50c. With card temp you see a 13mhz throttle above 63c and again at 73c so if you can keep your card below these temps you instantly gain 26mhz overclock or 2 speed bins regardless of ASIC and all down to the way GPU boost 2 works on an NVidia cards.
Zotac AMP 980ti - Custom bios enabling 325W (130%) TDP only running using a Nzxt G10 with a corsair H110 water.
Very happy to see this thread I hope we get some support I really want to see whether ASIC really makes a difference. I suspect it makes a difference for VDDC but I have seen a throttle under air that I no longer see under water because my temps are always below 50c. With card temp you see a 13mhz throttle above 63c and again at 73c so if you can keep your card below these temps you instantly gain 26mhz overclock or 2 speed bins regardless of ASIC and all down to the way GPU boost 2 works on an NVidia cards.
Last edited:
We need the max figure for VDDC as well please.
Associate
Hi, I hope this is sufficient, took the picture before realising you wanted a picture of the start screen:
Gigabyte G1 Gaming 980Ti
ASIC - 72.8%
GPU Clock - 1320MHz
Set Boost - 1409MHz
Max Boost - 1560MHz
Max Temp - 60c
Max VDDC - 1.243v
Gigabyte G1 Gaming 980Ti
ASIC - 72.8%
GPU Clock - 1320MHz
Set Boost - 1409MHz
Max Boost - 1560MHz
Max Temp - 60c
Max VDDC - 1.243v
Last edited:
Hi, I hope this is sufficient, took the picture before realising you wanted a picture of the start screen:
Gigabyte G1 Gaming 980Ti
ASIC - 72.8%
GPU Clock - 1320MHz
Set Boost - 1409MHz
Max Boost - 1560MHz
Max Temp - 60c
Max VDDC - 1.243v
The results screen is fine.
And on the scoreboard.
Associate
Awesome, thanks!
Soldato
Last edited:
Soldato
Are the Gpus not supposed to be stock settings? 
Associate
Soldato
Soldato
i played dying light last night for about 3 hours and all was good so seems stable
happy daysit does have occasional coil whine though
some of these 980ti's clock so well!