fans

Case (ASUS TUF GT501) https://www.asus.com/Motherboards-Components/Gaming-Cases/TUF-Gaming/TUF-Gaming-GT501/ I have a 360mm Rad and would like to put it on top of my case. I am fairly new to building PC's so I do not know what I should have as intake and exhaust fans. I was thinking about 3...

Looking for suggestions for 120mm fans, two for top mounted corsair 240mm AIO and one as intake at the bottom of the case (Raijintek ophion evo). Noise is a primary factor for me so the quieter the better. Obviously the go to is noctua nf-a12x25 pwm, but I can't find them anywhere for the...

Recently bought the Phanteks P500a (non-rgb case). I heard some bad things about the 2 stock fans so have started purchasing additional/replacement fans. I bought 2 Noctua 140mm fans that are ultra quiet (Noctua NF-A14 ULN). The concern that I have is that their only 800rpm. Airflow: 46.9 CFM...

Hi guys! I thought I would be writing about this to see if you have suggestions for me, because I am a bit desperate at the moment :). I currently have a Threadripper 3960X in a TRX40 Arous Xtreme. The PSU is a Corsair AX1600i and the computer has two GPUs: a Gigabyte RTX 3090 Gaming OC and...

Hi Guys, So I just recently upgraded from a Ryzen 2600 to a Ryzen 3900x and I am struggling to keep the temps down. I am just using the default stock cooler that came with the 3900x. Whilst playing Warzone my temps go from 75 degrees to 85 degrees. I ran a realbench stress test and ended it...

I'm trying to build my first gaming PC and could do with advice in a few areas.. I should probably start with what I do currently have (not a lot): PSU - corsair hx850 2× Noctua NF-A14 ULN fans Phanteks p500a (ordered and on its way) What I'm currently finding a challenge is choice for...

Hi guys, Weird question but this is bugging me. I've got two Corsair static pressure fans mounted at the bottom of my case and they are producing a really eerie wind noise. From what I've found it's caused by the width of the grills in the case. From experimenting placing the fans under a push...

I have been looking at different options for RBG fans in my new case however i just cant justify paying so much for corsair and cooler master, i saw these and was wondering if anyone has any experience with them? are they bad? EZDIY-FAB 5-Pack upHere 3PIN if not could people make some...

Hi all, I'm near the end of buying all the bits for my build. I've turned my attention to case fans now. All my components are in my sig. My priority is for a quiet PC. I don't want to hear it. From what I have read, this isn't likely to get very hot, there'll be some light gaming and CAD...

I have a pretty big PC case with lots of parts for fans, some of which aren’t covered with that just filter foam stuff. The case also has a few holes for stuff like water cooling pipes/grilles in the unused PCI slot covers that are completely open. i’m wondering whether I should cover those up...

Hi, I've had this build running for around 6 months now & it works absolutely fine (apologies for the slightly misleading title). Temps never about 65c on the CPU and GFX around 70c when pushed. Specs wise: AMD 3700x CPU MSI Gaming X Nvidia 1080 - playing in ultra widescreen 1080p (likely...

Hi guys. Looking for some advice here. Yesterday I completed my first build. It was a awesome experience and was extremely pleased to see that it posted first time. The one issue I have is with my Lian Li SL120 fans. I am pretty sure that I have hooked them up to the controller correctly but...

Today I came to my PC after hearing a clicking noise and feared a HDD failure but turns out it's just one of the 3 Phanteks 140mm fans that has bearing failure. Rather than replace just that one I have decided to throw them all i the bin and get nice new ones designed to have a long MTBF with...

Hi all, I've previously posted about having high idle temps with my new (and first time) build. My CPU temps up anywhere between 40°c - 55°c with spikes up to anything like 65°c at idle and light use (i.e. running spotify). However, I've played around some more with my fans today and...

Hello, Planning a new build with an i9 9900k & RTX 2080 Ti, so of course I'm going to need some serious cooling. For the i9, I'm planning to go with the Corsair H150i. I just need suggestions on what case is ideal for airflow with that probably mounted at the front. Also, I'm gonna need some...

Hi - first time poster here and also first time builder... so bare with me please! My CPU temps seem pretty high for pretty light use, anywhere between 40°c - 55°c with spikes up to anything like 65°c. Specs below and then a bit more background: CPU: AMD Ryzen 5 3600x Cooler: NZXT Kraken X63...

i Purchased some Cheapo uphere RGB fans, they have a 6 pin connector and came with an RGB controller that connects to sata with remote controll for RGB. As there is no mobo control for these fans i wonder if its possible to DIY some sort of connector for them or is there another 6pin RGB...

I have an Chillblast Fusion Sword 2 Gaming PC which I bought from new quite a few years ago (for reference http://pcproblems.co.uk/pt/products.php?q=Chillblast+Fusion+Sword+2+Gaming+PC+Intel+Core+i5+4430+8GB+RAM+1TB+HDD+DVDRW+AMD+R7+265+Windows+10+64bit) Live in a high humidity high dust...

Hi, Planning on doing a new build when Intel 10th gen CPUs come out and was thinking about my case choice. I quite like the Phanteks Enthoo 719 but I have a question about fan layout. It can take fans in the front or the side, but would having fans on both the front and the side improve...

Hello everyone, So I've installed these new fans as I've listed above and i was changing colours using the asus aura sync software just to see what ones were best. In doing this the front 2 fans have stuck on white and no matter what i do I can't get them to go any other colour. The top 2 fans...