£1850 Budget for Gaming Rig, Monitor snd Rift Bundle.

Plec said:
CPU is warmer than i expected - but the BIOS does work the CPU.

Watch them for 5 minutes and see if they rise
Click to expand...


Ill keep an eye in them. I had the case fans on the lowest setting so ive turned them up.

I only have two boot option and dont know.how to USB as one?

I saved and exited and waited for the flash screen but my only option was f8 and this took me to a screen that lets you select safe mode etc...

I clicked start windows normally and it strated going through set process, asked for my windows ket but then told me no media found?

Also when i put the usb stick into the usb port on the front and click ok the mouse and keyboard stop responding unit i took the usb stick back.out.

Im.lost at what to do now!
 
Your CPU is warm but as mentioned the BIOS does work the CPU. As it's not rising we'll check it properly once the system is set up in Windows.
leeince said:
Ill keep an eye in them. I had the case fans on the lowest setting so ive turned them up.

I only have two boot option and dont know.how to USB as one?

I saved and exited and waited for the flash screen but my only option was f8 and this took me to a screen that lets you select safe mode etc...

I clicked start windows normally and it strated going through set process, asked for my windows ket but then told me no media found?

Also when i put the usb stick into the usb port on the front and click ok the mouse and keyboard stop responding unit i took the usb stick back.out.

Im.lost at what to do now!
Click to expand...

Have you tried orbitals method?

Orbital quote: What I normally do is set boot priority to SSD and with USB stick PLUGGED INTO BACK OF THE BOARD, hit F12 and tell it to boot from USB this once and then install windows .

Others may do it differently, I once set usb to be boot priority one and SSD second and twice with Gigabyte and Asus board , it restarted when installing and wanted me to install it over again and got caught in s loop
 
And use a USB 2 slot at the back of the PC if you have one - otherwise USB 3.

What size is the USB stick your using and does it only have Windows 10 on it?
 
leeince said:
When i go to display settings it will only let me select 1280x1024 resolution? Any ideas why?
Click to expand...
Yep, no drivers installed.

Have you reached a screen yet which gives you a choice of install?

Or have you ploughed on with install (not a problem if you have - as long as SSD is only hooked up)?
 
I
Plec said:
Yep, no drivers installed.

Have you reached a screen yet which gives you a choice of install?

Or have you ploughed on with install (not a problem if you have - as long as SSD is only hooked up)?
Click to expand...
Its installed, its just doing an update. It detected the wireless card and connected to the internet, i downloaded that screen saver to what the screen look like.
 
You must log in or register to reply here.
Back
Top Bottom