3.6GHZ + C2D clockers please

RaiderX · 2 Jul 2007 at 23:00

[Death] said:
3.6 prime stable. 1.37 volts underload , i kno the chip will do 3.9 - 4ghz, but need to get my watercooling first

with those temps you could probably get 4GHz anyway, i got water and get only a couple c lower than that at 3.6GHz, temps rise by 5c at 4ghz

MisterT · 4 Jul 2007 at 00:32

RaiderX said:
with those temps you could probably get 4GHz anyway, i got water and get only a couple c lower than that at 3.6GHz, temps rise by 5c at 4ghz

but still that is water, it wont rise 5C on air from 3.6 to 4ghz. temps fluctuate less on water as you prob know.

orthos'd at 3.68ghz will try higher maybe at weekend if i get the time, such a tedious way to proove stability. did this overnight and had to screeny in my rush to get ready for work so forgot cpuz n shiz but eh well:

vocch · 21 Jul 2007 at 20:42

flibby said:
Kinda right I guess, cause if you own a QX6800, then 3.6 isn't exactly a good sized overclock However if you manage 3.4 on a e6300 then I'm impressed

It aint no 3.6ghz but then again if i still had my e6400 it would have been a doddle....but i think this qualifies as a non puny oc lol.

1 [email protected] Prime 8hrs on Air DONE!

Shot at 2007-07-21

easyrider · 21 Jul 2007 at 21:39

Robbie G said:
Agreed, this thread is pointless and doesn't make sense. "Who's got 3.6" is a nominal figure without specifying a specific CPU. I would have thought easy, who is so specific about what others are allowed to post, would have clamped down on this .

3.6 Ghz with any C2D is a nice clock and it starts getting tricky at this speed.

3.4ghz with any C2D is pretty straight forward TBH.

I have tried most of the C2D range and have gotten 3.4ghz with all of them within half an hour of testing.

3.6ghz + is harder to get stable 24/7 hence why I started this thread.

vocch · 21 Jul 2007 at 22:06

easyrider said:
3.6 Ghz with any C2D is a nice clock and it starts getting tricky at this speed.

3.4ghz with any C2D is pretty straight forward TBH.

I have tried most of the C2D range and have gotten 3.4ghz with all of them within half an hour of testing.

3.6ghz + is harder to get stable 24/7 hence why I started this thread.

So your saying my above post is pretty straight forward (495fsb )....if so i welcome some prime screenies on AIR!.

...if i had a chip with a higher multi i would say it the other way around....ESPECIALLY if your on water!.

Scoobie Dave · 21 Jul 2007 at 23:02

3.6 here + water, not tried pushing it any further yet . . .

Sinny · 22 Jul 2007 at 01:47

the thread seems to make out its like an elite club, as its pretty much not i have a e6420 on 3.4ghz and wont get past that, i have tried putting the voltage up to 1.58vcore, and it wont even do 10 mins TAT stable, its under water as well.

i have no clue as what to do next, change RAM core wouldnt make a difference i imagine, its on 2.1 at the moment.

and yes im jealous :<, i want my e6550

juno_first · 22 Jul 2007 at 09:18

Nice thread, some big clockers out there :cool:

I'm only 3.5 atm, though it is a quad & 83c under heavy load

& the radiator keeps my feet warm

Does it count if had a Northwood at 3.9 - 3 years ago

Wish I could run Orthos as everyone else though I cant get it to use all cores, so I test with Prime v2.53.

4Qman · 27 Jul 2007 at 15:30

My glorious E6400, Same CPU i used in custom PC Feature "Cool Master Stacker Build". Was stable at 4.1Ghz phase

easyrider · 27 Jul 2007 at 22:55

4Qman said:
My glorious E6400, Same CPU i used in custom PC Feature "Cool Master Stacker Build". Was stable at 4.1Ghz phase

Temps are a tad high.
Very high for water mate

My 6400 was 4.3ghz stable and more with phase but mobo ran out of FSB

DarkShadow · 27 Jul 2007 at 22:59

I managed to get my E6300 (click link in sig) to 3.7ghz, didn't test for stability.

I'll have a play over the weekend and get some evidence

easyrider · 27 Jul 2007 at 23:06

dark_shadow said:
I managed to get my E6300 (click link in sig) to 3.7ghz, didn't test for stability.

I'll have a play over the weekend and get some evidence

without proof of your clock.

your days are numbered!

in my thread :eek:

iMacMart · 27 Jul 2007 at 23:35

Not happy with the temps on this, going to reseat and re-apply AS5

Trox · 27 Jul 2007 at 23:36

3.72Ghz
Link to screenshot in sig, been like that for 7 months now.

iMacMart · 28 Jul 2007 at 00:46

On air or water?

Tom|Nbk · 28 Jul 2007 at 08:26

*Raises Hand*

Intel C2D E6600 @ 3.6Ghz 8 Hours Stable @ Priority 9

Phunky Phish · 28 Jul 2007 at 17:47

God i need to get a new mobo! I cannot get past 380 fsb with mine so stuck down here at 3.4Ghz!!

Darn and blast

Sniper123 · 28 Jul 2007 at 22:08

http://valid.x86-secret.com/show_oc.php?id=221965

PU : Intel Core 2 Duo E6300 (*1)
CPU Arch : 2 Cores - 2 Threads
CPU PSN : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
CPU EXT : MMX SSE SSE2 SSE3 SSSE3 EM64T
CPU Cache : L1 : 2 x 32/2 x 32 KB - L2 : 2048 KB
Core : Conroe (65 nm) / Revision : B2
CPUID : 6.F.6 / Extended : 6.F
Freq : 3570.04 MHz (510.01 * 7)
----------------------------------
MB Brand : Gigabyte Technology Co. Ltd.
MB Model : 965P-DS3
NB : Intel P965/G965 rev C2
SB : Intel 82801HB/HR (ICH8/R) rev 02
----------------------------------
RAM Size : 2048 MB
RAM Freq : 510 MHz
RAM Type : DDR2-SDRAM Dual Channel
RAM Ratio : 1:1
RAM Timings : 5-8-8-24
----------------------------------
Slot 1 : 1024MB (PC2-6400)
Slot 1 Manufacturer : GEIL
Slot 2 : 1024MB (PC2-6400)
Slot 2 Manufacturer : GEIL

Air cooled by TT120

Ram is holding it back

Edit*
Can I still be in the club :rolleyes:

Devious · 28 Jul 2007 at 22:25

Sniper123 said:
Edit*
Can I still be in the club

Nope

er ask easy.

weescott · 28 Jul 2007 at 23:14

I clocked this chip purely so I could join the club: