4930k RIVE 2133mhz RAM

Deathjester said:
Where should I go?

130?

Or smaller?

130 fails on DRAM Voltage which is at 1.75v so I can't really go any higher.

129.5 seems ok...
Click to expand...


Your perhaps at your limit then and i wouldn't go any more, stick with what you have and just use your rig. For 8 sticks you have some excellent results there.

I'm about at the same level as you with mine, one more click here or there can cause instabilities, namely in BF4.
I'd save your profile to a usb stick, then you could look at other options. Possibly a benching profile?? Remove 4 sticks, up voltages slightly and try again.
 
Nickolp1974 said:
Your perhaps at your limit then and i wouldn't go any more, stick with what you have and just use your rig. For 8 sticks you have some excellent results there.

I'm about at the same level as you with mine, one more click here or there can cause instabilities, namely in BF4.
I'd save your profile to a usb stick, then you could look at other options. Possibly a benching profile?? Remove 4 sticks, up voltages slightly and try again.
Click to expand...

I would, but to bench my system I'd have to drain my CPU loop as my ram has water blocks...

I've saved the profile to the bios, I'll save to a stick as well tonight... I'm going to pull it back to 129, as I can drop the vcore back down a little as well!

The RAM just kept giving and giving in terms of timings!!

But yeah, I'm pretty pleased with what I've achieved! Top 10 dual GPU for Firestrike on the board!
 
Last edited:
Unless with 4 sticks you can get 1t I can't see it improving performance much, thats already into moderately to well tuned 1t 4 stick territory. Might be able to increase the write/copy by about 200MB/s tops maybe and drop 0.5ns latency but thats not gonna really do much in the real world.
 
You must log in or register to reply here.
Back
Top Bottom